Manual Setup Guide
In the box
- 1x Pair of TWS Earbuds
- 1x Charging Case
- 2x Pairs of Additional Earmuffs
- 1x Type-C Charging Cable
- 1x User Manual
- 1x Warranty Card
- 1x Catalogue
Power On (First Time User)
Step 1: To switch the earbuds on (Smart Power On), simply open the lid of the charging case (when earbuds are inside). Our IWPTM (Insta Wake N' Pair) Technology enables the earbuds to power on automatically, get connected, and enter into the connection mode. OR Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds.
Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by green LED flashes.
Connection Mode
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.
Step 4: Search for 'Airdopes 621' and pair accordingly.
Congratulations! Your earbuds are now connected successfully via Bluetooth.
Note: Pairing mode lasts for 5 minutes. If the pairing time is missed, you will need to reconnect the earbuds and follow the above-mentioned procedure.
boAt Airdopes 621 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices.
Single Earbud Usage
Step 1: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud.
Step 2: The selected earbud will automatically enter the connection mode, indicated by green LED flashes.
Step 3: Turn on Bluetooth on your phone/media device and search for 'Airdopes 621' to connect.
Notes:
- To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
- You cannot skip tracks or return to the previous tracks in Mono mode.
Basic Functions
- Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant.
- Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call.
- Reject Call: Long touch the CTC for up to 1.5 seconds to reject incoming calls.
- Play/Pause Music: Single tap on either earbud's CTC to play or pause music.
- Next Track: When playing music, double tap the right CTC to skip to the next song.
- Previous Track: When playing music, double tap the left CTC to return to the previous song.
- Powerbank Function: In case of emergency, for instance, when your phone runs out of battery, you may utilize the 2600mAh Case for charging your device for some time.
Note:
- It is advisable not to use the Carry cum Charge case as a power bank unless there's some sort of emergency.
- Volume can only be controlled via the media device. The earbuds do not support this function.
Voice Assistant
Step 1: Long touch the CTC on either earbud for 2 seconds to activate the smart voice assistant (Google/Siri Assistant).
Step 2: The respective voice assistant screen pops up, and you may place your commands at ease.
Tips: You may try the following commands:
- What is the weather?
- Play a song
- Set a reminder
Example commands: "What is the weather?", "Play a song", "Set a reminder".
Smart Power Off
Step 1: After usage, remove both the earbuds from your ears.
Step 2: Place the earbuds back into the charging case in the correct orientation.
Step 3: The earbuds will automatically switch off (and enter into charging mode).
Manual Power Off
Step 1: Long touch the CTC on either earbud for 5 seconds.
Step 2: Once the earbuds get turned off, place them back inside the case and close the lid.
LED Indicators / Functionalities
- Long touch either CTC for 2 sec to activate voice assistant.
- Long touch both CTCs for 3 seconds to manually power on.
- Long touch either CTC for 5 seconds to manually power off.
- Long press the CTC on both earbuds inside the case for up to 10 seconds for reset.
Charging The Earbuds
Step 1: Please insert the earbuds back inside the charging case in the correct orientation.
Step 2: A solid green LED indicates that the earbuds are being charged. Once fully charged, the LED turns off.
Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.
Note: Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.
Charge The Case
To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/wall adapter/power bank, etc. The case battery display shows the remaining battery capacity of the case as well as of both the earbuds.
Factory Reset
Perform the Factory Reset in case you face any difficulty while operating your Airdopes 621.
NOTE: Before performing reset, clear "Airdopes 621" from pairing device history by forgetting the device.
Step 1: Place both the earbuds back inside the charging case in the correct orientation.
Step 2: Long press the CTC on both earbuds inside the case for up to 10 seconds to perform a Factory reset, which is indicated by the flashing of the green LED three times.
Step 3: Shut the lid of the charging case and then re-open it again.
Step 4: Once you take the earbuds out from the charging case, they automatically restart.
Step 5: Congratulations! Your Airdopes 621 has been Reset.
Troubleshooting
| Potential Problem | Solution |
|---|---|
| If one earbud is not working | Perform the Factory Reset |
| If earbuds are not in connection/scan mode | Perform the Factory Reset |
| If earbuds disconnect during phone call | Charge the earbuds or perform the Factory Reset |
| If there are other exceptions in usage | Place the earbuds back into the charging case and try using them again or perform the Factory Reset |
| If the In-Ear Detection or Touch Controls don't seem to respond | After long usage, residual stains and perspiration can affect the touch control area; please use a clean cloth to wipe those areas softly. |
Specifications
| Bluetooth Version | V5.0 |
| Water Resistance | IPX7 |
| IWP Technology | Yes |
| Power Bank Function | Yes |
| Music Playtime | Up to 5.5H per charge; Up to 150H additional with Case |
| Standby Time | 70H |
| Transmission Range | 10m |
| Driver Size | 6mm*2 |
| Bluetooth Profiles | HFP/HSP/A2DP/AVRCP |
| Frequency | 20Hz-20kHz |
| Battery | 2600mAh (Case) 35mAh*2 (Earbuds) |
| Charging Time | About 45mins Earbuds; 3-4 hours Case |
| Charging Interface | Type C |
| Product Weight | 129g |
Charging norms & Precautionary Guidelines
- Charger/Brick/Adapter: 5V/2A
- Cable/Wire: Standard Cable (35 Strands @0.10mm diameter/strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.
Warning
- Please follow the instructions to operate.
- Please don't use the earbuds in extreme temperatures.
- Please don't use the product near water.
- Please keep the product away from heat sources, as the heat may damage it.
- Don't jam the ports such as charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbuds' service life.
Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the phone / media device.
