SCS Sentinel AudioKit 3208D Wired Intercom System
Installation and User Manual
Safety Instructions
This manual is an integral part of your product. These instructions are provided for your safety. Read this manual carefully before installing and keep it in a safe place for future reference. Select a suitable location. Make sure you can easily insert screws and wallplugs into the wall. Do not connect your electrical appliance until your equipment is totally installed and controlled. The installation, electric connections and settings must be made using best practices by a specialized and qualified person. Check the product is only used for its intended purpose.
Description
Kit Contents / Dimensions
The AudioKit 3208D kit includes the following components:
- Indoor Handset Unit: Dimensions 98 mm (width) x 214 mm (height) x 40 mm (depth).
- Outdoor Unit: Dimensions 116 mm (width) x 198 mm (height) x 55 mm (depth).
- Mounting hardware (screws and wall plugs).
- User Manual.
A visual representation shows the indoor handset, the outdoor unit with its mounting plate, screws, and the manual.
Product Presentation
The indoor unit (Handset) features a volume adjustment control, a speaker, a microphone, a call button, and an internal cable socket. The outdoor unit features a loudspeaker, an illuminated label holder for names, a microphone, a call button, and a housing for flush mounting.
A diagram illustrates the indoor handset, highlighting the volume control, handset, cable socket, and call button. Another diagram shows the outdoor unit, indicating the loudspeaker, illuminated label holder, microphone, call button, and the screw opening for the recessed housing.
Wiring / Installation
Wiring Diagram
The system uses a 2-wire connection. The wiring diagram shows the connection between the indoor handset (terminals 1-6) and the outdoor unit (terminals 1-6). Cable requirements vary by distance:
- 0 to 50 meters: use 0.75 mm² cable (not supplied).
- 51 to 100 meters: use 1 mm² cable (not supplied).
- For lock/strike control (optional): use 1 mm² cable for distances up to 10 meters.
Warning: Connecting cables are not provided. ⚠️
A schematic illustrates the wiring between the indoor handset and the outdoor unit. It also shows an optional connection for a lock or strike.
Installation and Connection
Mount the outdoor unit on a flat wall at a height of 1.5 meters. Installation under a porch or covered area is highly recommended to protect it from weather.
To install the flush-mounted outdoor unit, remove the bottom part of the panel, slightly lift the unit, and slide off the front panel.
Connect the wires to the outdoor unit as per the wiring diagram.
Mount the indoor unit on a flat wall at a height of 1.5 meters. First, attach the rear plastic support, connect the wires, and then attach the handset to its support.
Connect the indoor unit to an indoor power source.
Perform a functional test before permanently fixing all elements.
After installation and testing, apply a clear silicone seal on the top and sides of the outdoor unit (not the bottom) to prevent water infiltration.
An illustration shows a person standing next to a wall, indicating the recommended installation height of 1.5 meters. Another diagram shows the dimensions for mounting the outdoor unit on a wall: approximately 90mm width, 155mm height, and 158mm depth.
Technical Features
| Feature | Outdoor Station | Phone (Indoor Unit) |
|---|---|---|
| Installation | Flush-mounted | Wall-mounted |
| Facade | Aluminium | N/A |
| Control of a strike/lock | 12VDC / 1.2A max | N/A |
| Dimensions | 116 x 198 x 55 mm | 98 x 214 x 40 mm |
| Wiring | N/A | 0-50m: 0.75mm² (not supplied); 51-100m: 1mm² (not supplied) |
| Maximum wiring distance | N/A | 100 m |
| Used | N/A | Indoors only |
Assistance
For assistance, contact the technical support team. Hotline: ? 0 892 350 490 (Service: €0.15/min + call charges). Operating Hours: Refer to the website: scs-sentinel.com
Preparation for Support: Please have your product reference number ready. It is recommended to test the equipment using temporary connections ("flying leads") to help diagnose if the issue is with the equipment or the installation.
Warranty
The product comes with a 2-year warranty. Keep the barcode and proof of purchase carefully, as they are required to claim warranty. The invoice will be required as proof of purchase date.
Warnings
- Maintain a minimum distance of 10 cm around the device for sufficient ventilation.
- Do not obstruct ventilation openings with items like newspapers, tablecloths, or curtains.
- Keep the device away from open flames, such as lit candles.
- Product functionality may be affected by strong electromagnetic interference.
- This equipment is intended for private consumer use only.
- Do not expose the appliance to dripping or splashing water. Do not place liquid-filled objects (e.g., vases) near the appliance.
- Do not use in tropical climates.
- The mains plug must remain easily accessible as it serves as the disconnect device.
- The handset must only be used indoors.
- Connect all parts before switching on the power.
- Handle electronic components with care to avoid damage.
- Do not block the microphone on the outdoor unit or the handset.
- Keep packaging materials away from children and animals during installation, as they can pose a danger.
- This product is not a toy and is not designed for use by children.
Maintenance
Disconnect the appliance from the power supply before any maintenance. Do not clean with solvents, abrasive, or corrosive substances. Use a soft cloth. Do not spray anything on the appliance.
Ensure proper maintenance and regular checks for signs of wear. Do not use if repairs or adjustments are needed; contact qualified personnel.
Disposal
Do not dispose of this product with household waste. It may contain hazardous substances harmful to health and the environment. Return it to your retailer or use local selective collection services.
