SCS Sentinel VisioKit 7: Additional Video Intercom Monitor

A- Safety Instructions

This manual is an integral part of your product. Read these instructions carefully for your safety before installation and keep them for future reference. Select a suitable location and ensure screws and wallplugs can be easily inserted. Do not connect the electrical appliance until the equipment is fully installed and controlled. Installation, electric connections, and settings must be performed by a qualified person following best practices. The power supply must be installed in a dry place. Ensure the product is used only for its intended purpose.

B- Wiring / Installing

B1- Wiring Diagram

The VisioKit 7 can be connected as a main monitor or an additional monitor. The wiring involves connecting the monitors using a BUS connection. Ensure correct polarity (A and B) is maintained. The maximum cable length is 100m with 1mm² wire, or 50m with 0.75mm² wire. For power, a 15V DC 0.8A (minimum) DIN rail transformer can be used. If connecting to a distribution board via a DIN rail transformer, professional electrical knowledge is recommended.

Polarity Warning: Be careful to respect the polarity. The wire with gray strokes should connect to the positive (+) terminal, and the wire with writing should connect to the negative (-) terminal.

B2- Installation and Connection

Diagrams illustrate the mounting dimensions (1450mm height, 1500mm width, 500mm depth) and connection ports for the indoor monitor.

C- Using / Settings

C1-1- Description

The 7-inch LCD screen includes the following functions:

• Automatic Gate Unlocking
• Answer a call, intercommunication, up button
• End a call, intercommunication, down button
• Settings
• Gate Unlocking

Connection ports include a DC adapter slot and a speaker.

C1-2- Settings

For detailed information on settings, refer to the main VisioKit 7 video door phone manual.

C1-3- Intercom Function

Up to 3 monitors can be connected to the same outdoor station, allowing inter-monitor communication.

• Monitor 1: Initiates a call.
• Monitor 2: Answers a call.
• Monitor 1 or 2: Ends a call.

D- Technical Features

Adapter

Indoor Monitor

E- Warranty

The product comes with a 2-year warranty. Keep the invoice and barcode as proof of purchase for warranty claims.

F- Warnings

• Maintain a minimum distance of 10 cm around the device for ventilation.
• Do not block ventilation openings with items like newspapers, tablecloths, or curtains.
• Keep the device away from open flames, such as candles.
• Strong electromagnetic interference may affect product functionality.
• This equipment is intended for private consumer use only.
• Do not expose the appliance to water drips or splashes. Do not place liquid-filled objects, such as vases, near the appliance.
• Do not use in tropical climates.
• The mains plug serves as the disconnect device and must remain accessible during use.
• The monitor and adapter are for indoor use only.
• Connect all parts before powering on the unit.
• Use only the provided adapter.
• Avoid impacts on the components as they are fragile.
• Do not block the microphone.
• Keep packaging away from children and animals during installation, as it can be a hazard.
• This appliance is not a toy and is not designed for use by children.
• Disconnect the appliance from the main power supply before servicing.
• Clean the product with a soft cloth only. Do not use solvents, abrasive, or corrosive substances. Do not spray anything on the appliance.
• Ensure regular maintenance and checks for wear. Call qualified personnel for repairs or adjustments.
• Dispose of the product responsibly, following local selective collection guidelines for electronic waste.