HomeSpot® JY508 Wireless Neckband Speaker
Video instructions available at: www.homespotdigital.com/support/videos/
Quick Start Guide
Product Overview
The HomeSpot JY508 is a wireless neckband speaker designed for comfortable, hands-free audio. It features two main speaker units connected by a flexible band that rests around the neck.
Key Components:
- Left Unit (L): Contains the Volume Up / Next Song control.
- Right Unit (R): Contains the USB-C Charging Port, LED Indicator, Power On/Off / Play/Pause control, and Volume Down / Previous Song control.
Charging
To charge the speaker, connect the USB-C cable to the USB-C Charging Port on the right unit and to a power source. The LED indicator will show the charging status. ⚡
How to Wear
Place the neckband speaker around your neck, with the speaker units positioned comfortably near your ears.
Power On/Off
- To Power On: Press and hold the Power button for 2 seconds.
- To Power Off: Press and hold the Power button for 5 seconds.
Bluetooth Pairing
- Ensure the speaker is powered on. The LED indicator will blink blue, indicating it's ready for pairing.
- On your mobile device (phone, tablet, etc.), navigate to Bluetooth settings.
- Enable Bluetooth on your device.
- In the list of available devices, find and select "HomeSpot JY508-AV".
- Once connected, the LED indicator will show a slow blue blink, and your device will display "Connected".
Basic Controls
- Volume Up / Next Song: Short press the Volume + button for volume adjustment. Press and hold for 1 second to skip to the next track (⏭️).
- Volume Down / Previous Song: Short press the Volume - button for volume adjustment. Press and hold for 1 second to go to the previous track (⏮️).
- Play/Pause/Call Management: Press the Power/Play/Pause button once to play or pause music, or to answer/end a call (▶️ / ⏸️).
- Voice Assistant: Press and hold the Power/Play/Pause button for 2 seconds to activate your device's voice assistant.
LED Indicators
| LED Indication | Status | Meaning |
|---|---|---|
| ● | Solid Blue | Power On or Waiting for Connection |
| ●●●●● | Fast Blue Blinking | Bluetooth® Pairing or Connecting |
| ● | Slow Blue Blinking | Bluetooth® Connected |
| ● | Solid Red | Battery Charging |
Specifications
| Transducers | 33mm 4Ω full range loudspeaker x 2 |
| Output power | 3W x 2, Total 6W RMS |
| Frequency response | 50 Hz - 20 kHz |
| Signal-to-noise ratio | > 80 dB |
| Battery type | Li-ion polymer 600mAh |
| Battery charge time | 2 hours (5V/500mA) |
| Music play time | Up to 12 hours (60% volume level) |
| Bluetooth® version | 5.1 |
| Effective Range | 10m (line of sight) |
| Bluetooth® profile | A2DP 1.3, AVRCP 1.6 |
| Product dimensions (W x H x D) | 223 x 202 x 51 mm / 8.8 x 8 x 2" |
| Net weight | 0.24 kg / 0.53 lbs |
| Maximum Operating Temperature | 45 °C |
Troubleshooting
| Problems | Suggestions |
|---|---|
| How to reset the speaker? | Turn on the speaker, press and hold Volume+ and Volume- buttons for 10 seconds. The LED will be fast blinking blue after reset. |
| Cannot pair the speaker with my mobile phone | Turn on the mobile phone before turning on the speaker. Enable the Bluetooth feature on your mobile phone. |
| Mobile phone cannot discover the speaker | Remove the previous pairing record on the mobile phone, then re-do the pairing. Reset the speaker. |
| Poor audio quality | Reduce the distance and remove obstacles between the speaker and the paired mobile device. |
| Speaker cannot be switched on | The battery level is too low; charge the speaker with the included charging cable. |
Compliance and Notices
Bluetooth® Trademark Notice: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by GT-tronics HK Ltd, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Notice:
WARNING: To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
Compliance:
- Industry Canada: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. (French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)
- FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.
