Light Socket Security Camera with Alexa-SC16

Introduction and Overview

This manual provides instructions for setting up and using the Light Socket Security Camera with Alexa, model SC16. This camera is designed to fit into a standard E27 light socket, offering HD video surveillance, pan and tilt capabilities, night vision, and integration with Amazon Alexa.

The camera features a compact design with an E27 socket, an HD camera lens, a reset button, a speaker, 355° pan and 120° tilt functionality, IR LEDs for night vision, a microphone, white LEDs for illumination, an IR sensor, and an SD card slot. Its dimensions are approximately 68mm in diameter and 148mm in height.

Getting Started: App Download and Account Setup

1. Download the iCSee App

To begin, download the "iCSee" application. You can find it by searching for "iCSee" in the App Store [App Store] or Google Play Store [Google Play Store], or by scanning the provided QR code [QR Code] with your smartphone.

2. Sign Up and Log In

Open the iCSee app. If you are a new user, tap "Sign up" to create an account. If you already have an account, enter your username and password to log in. Options for saving your password and auto-login are available.

Device Setup and Pairing

3. Add Device

In the iCSee app, tap the "+" icon, typically located in the upper right corner, to add a new device. Select "WiFi Camera" from the list of device types.

4. Connect to WiFi

Ensure your smartphone is connected to the same 2.4GHz WiFi network that you intend to use for the camera. Note that 5GHz WiFi networks are not supported. After connecting your phone, press "Confirm" in the app.

5. Screw in and Power Up

Screw the camera into a standard E27 light socket and power it on. The camera will perform a self-test and rotate upon powering up. A note indicates that the bulb camera has no internal battery and requires continuous power from the socket.

6. QR Code Pairing

The app will prompt you to display a QR code on your smartphone screen. Hold your phone screen with the QR code in front of the camera. The camera will scan the code to establish the connection. The manual advises on the correct posture for scanning.

7. Set Password and Name

Once paired, you will be prompted to set a password for the camera and assign a name to it for easier identification.

8. Connection Successful

Upon successful pairing, you will see a confirmation message indicating that the connection is successful.

Live Screen Interface

The live screen interface provides access to the camera's feed and controls. From here, you can access various settings by tapping the settings icon (⚙️), typically in the top right corner. Available settings include:

Basic Settings (e.g., screen flip)
Record Settings
Smart Alarm (motion detection, alerts)
Night Vision Options
Network Settings
Cloud Service (for cloud storage)
Local Playback (for SD card recordings)
Advanced Settings
About (device information)

You can switch between standard definition (SD) and ultra-high definition (UHD) video quality by tapping the "UHD" icon on the live screen.

Advanced Features and Maintenance

Installing a Micro SD Card

For local video recording, insert a Micro SD memory card (FAT32 format, maximum 128GB capacity) into the designated slot. Ensure the card is inserted in the correct direction and pushed until it clicks. To remove, gently push the card in until it disengages, then pull it out.

Resetting the Camera

To reset the camera to factory defaults, power it on and wait for the self-test. Locate the reset hole on the device and insert the provided pin. Press and hold the reset button for approximately 5 seconds until you hear a beep. The camera will then perform a self-test and reset.

Troubleshooting

Common Issues and Solutions

Q: Camera does not turn on or work?
A: Ensure the camera is screwed into a powered E27 socket. Wait for the camera to complete its self-test after powering on. If issues persist, contact support.

Q: WiFi not compatible?
A: Only 2.4GHz WiFi is supported. If you have a dual-band router, separate the 2.4GHz and 5GHz bands. Ensure the camera is placed in an area with a strong WiFi signal for smoother video streaming.

Q: Screen flip or motion tracking reverse movement?
A: You can flip the screen orientation in the camera's settings under "Basic Settings". If motion tracking moves in reverse after flipping the screen, contact the seller with your device information for potential firmware fixes.

Q: Why can't my phone receive alert notifications?
A: 1. Ensure motion detection ("Smart Alarm") is enabled and sensitivity is set appropriately. 2. Verify that the iCSee app has permission to send notifications on your phone. 3. In the app, navigate to Device Settings > Smart Alarm and enable "Event Push". Set "Event Time" to "All Day Alarm" if needed. 4. Note that alarm intervals (e.g., 1-3-5 minutes) limit the frequency of alerts.

Q: Can't play back video?
A: 1. Confirm that a memory card is inserted or cloud storage is purchased. 2. In "Record Settings", ensure recording is enabled and set "Full Storage" to "Overwrite" in "Local Storage". 3. If the playback screen shows "No local TF card", go to Settings > About and reboot the device.

Q: Device displays offline?
A: 1. Check your router for power outages or network disconnections. Wait a few minutes for the network to restore. 2. Verify that your WiFi name or password has not changed. If so, remove the device from the app and re-add it. 3. Reset the camera by holding the reset button for 5 seconds and reconnect it. 4. If the device frequently goes offline after a period of use, your router might be overloaded; consider a router with higher capacity or reducing connected devices.

Q: Frequent notifications even at low sensitivity?
A: 1. Set the image quality to "SD" for more accurate motion detection. 2. Enable the "Human Detection" function to reduce false alarms from non-human movement. 3. Turn off the "Auto Tracking" function, as camera movement can trigger alarms.

Q: Frequent alarms at night?
A: Turn off the "Auto Track" function and enable the "Human Detection" function.

Q: Can I use all camera functions for free?
A: Yes, all functions are free except for the cloud storage service.

Special Statement

The product is based on the actual product; this manual is for reference only. The mobile app and device firmware can be updated via the app. Do not install this device in moist, dusty, high-temperature, flammable/explosive locations, or places easily accessible to children.

Works with Alexa

The camera supports integration with Amazon Alexa. Follow these steps to link your iCSee account with Alexa:

Open the iCSee app and navigate to the section for linking third-party services (e.g., "Voice and other third-party services").
Select "Amazon Alexa".
Log in to your Amazon account and grant the iCSee app permission to access your Alexa devices.
Choose the camera device you wish to bind to Alexa and submit.

Once successfully linked, you can control your camera using voice commands. For example, say "Alexa, open smart camera" and then "Show my camera" to view the feed on compatible Alexa devices like Echo Show or Echo Dot.

Customer Support

If you have any questions about the products, please contact customer support via email at: Amz-SC@aliyun.com