Introduction
This mobile power supply uses an aluminum alloy + plastic shell, supports Apple and Type-C input, and uses the built-in Type-C PD output port to connect to other mobile devices and magnetic wireless charging to charge devices.
Product Description
The device features the following:
- 1. Power Switch: Click to turn on the mobile power supply. A symbol will appear when using fast charging or wireless fast charging.
- 2. Type-C Interface/PD: Supports both input and output.
- 3. Apple Line Interface: For charging via Apple's connector.
- 4. LED Display Screen: Shows the remaining power level (e.g., 100%).
- 5. Magnetic Suction Wireless Charger: For wireless charging.
Specifications
| Parameter | Details |
|---|---|
| Input Voltage/Current (Lightning) | 5V/2A |
| Input Voltage/Current (Type-C/PD) | 5V/3A, 9V/2A, 12V/1.5A |
| Output Voltage/Current (Type-C/PD) | 5V/2A, 9V/2.22A, 12V/1.5A |
| Output Voltage/Current (Wireless) | 5W/7.5W/15W |
| Battery Type | Lithium polymer battery |
| Rechargeable Cycles | 500 times |
| Suitable Environmental Temperature | 0℃-40℃ |
User Manual / Usage Instructions
- The built-in Type-C and Apple input ports can be used to charge the product.
- Use the built-in Type-C PD output port to connect to other mobile devices and the magnetic wireless charger to charge devices.
- Click the power button to turn on the power bank. A symbol will appear on the LED display when fast charging or wireless fast charging is active.
Common Problems and Solutions
| Fault | Reason | Resolvent |
|---|---|---|
| Charging time is not enough / LED screen does not display full charge | 1. Insufficient charging time. 2. Charger or product malfunction. 3. Remaining power is zero. 4. Power button or indicator light failure. 5. Product power failure. | 1. Charge the product for over 5 hours for 5000mAh capacity, or over 8 hours for 10000mAh capacity. 2. Recharge the product. 3. Consult with distributors or after-sales service. |
| Product charges/powers other devices but not fully | Product power is exhausted. | Recharge the product to activate it. |
| Product suddenly stops working and shows no power display when it still has some charge | External short-circuit or excessive load causes automatic protection. | Recharge the product. |
Matters Needing Attention
- For the first use, perform a charge and discharge cycle once to improve the product's service life.
- Please read all instructions carefully before using the product.
- Do not disassemble the product, as it will void the warranty.
Warranty Service
Thank you for purchasing this product.
| Name: | [Enter Name] |
| MODEL: | Q9 |
| Telephone: | [Enter Telephone] |
| Address: | [Enter Address] |
| Purchase Date: | [Enter Purchase Date] |
Note: Please do not disassemble the product, or the warranty will be invalid!