Product Overview
The Quest Qi10 is a 2-way, full-range compact installation loudspeaker designed for high-end commercial environments. It integrates advanced acoustic engineering with refined aesthetics. The loudspeaker features a hardwood cabinet and a smooth front grille for visual discretion. A rotatable horn flare ensures a consistent 90° x 70° dispersion pattern. The Qi10 is designed for seamless integration with Quest QXD amplifiers, which are equipped with DSP and preset functionalities, enabling the Qi10 to achieve a balanced frequency response and maximum efficiency.
[Image: A sleek, modern installation loudspeaker, typically shown in black or white, with a prominent front grille and horn.]
Key Specifications
| Specification | Value |
|---|---|
| Impedance | 8Ω |
| Transducers | 1" HF & 10" LF |
| Dispersion | 90° x 70° |
| Horn | Rotatable |
| Power | 300W RMS |
| Mounting | Horizontal & Vertical Brackets |
Detailed Specifications
| Specification | WHITE (RAL9003) | BLACK (RAL9004) |
|---|---|---|
| Models | Qi10W | Qi10 |
| Frequency Response (-6dB) | 55Hz to 20kHz | |
| Sensitivity - 1W @ 1m | 95dB | |
| Maximum SPL @ 1m | 125dB | |
| Power Handling (RMS/PEAK) | 300W / 600W | |
| Nominal Impedance | 8Ω | |
| Transducers | HF: 25mm (1") Compression Driver / LF: 254mm (10") Woofer | |
| Dispersion (H° x V° -6dB) | 90° x 70° | |
| Rotatable Horn | YES | |
| Connections | 4-Pin Euroblock/Phoenix Connector - 7.62mm Pitch (In/Thru) | |
| Rigging Points | Yes | |
| Dimensions (H x W x D) | 540 x 300 x 332mm (21.2" x 11.8" x 13") | |
| Weight | 16.5kg (36.4lb) | |
| Shipping Weight | 17kg (37.5lb) | |
| Shipping Dimensions (H x W x D) | 675 x 420 x 380mm (26.6" x 16.5" x 15") | |
| Cabinet Material & Finish | Marine Plywood with Polyurea Coating | |
| Grille Material & Finish | Steel mesh with Polyester Fiber Fabric | |
| Recommended Power Amplifier | Quest QX or QXD Amplifiers | |
| Accessories (Included) | Euroblock/Phoenix Connector, Cover Plate | |
| Accessories (Available Separately) | Horizontal Bracket (HBRQi10) Vertical Bracket (VBRQi10) | |
[Diagram: Technical drawings illustrating the loudspeaker's dimensions and mounting points. One diagram shows overall dimensions (Height: 540mm, Width: 300mm, Depth: 332mm) and mounting hole spacing. Another diagram details rear and side views with specific measurements for connection points and enclosure features.]
Accessories
-
Horizontal Bracket
Model: HBRQi10
[Image: A U-shaped metal bracket designed for horizontal mounting.]
-
Vertical Bracket
Model: VBRQi10
[Image: A C-shaped metal bracket designed for vertical mounting.]
*Quest Engineering reserves the right to make changes in specifications, or products without prior notice.
