The Quest MX10S is engineered to provide extended low-frequency output within the MX Series, complementing higher-end installations that require pronounced bass performance. Featuring a custom-designed 10-inch woofer with a 50mm voice coil and dual magnet configuration, the MX10S delivers robust and extended bass response suitable for commercial venues and distributed audio systems. It is available in low-sheen black or white finishes and is designed to integrate seamlessly with other series components, ensuring a balanced and visually coherent audio solution.
Textual description of the subwoofer image: A front-angled view of the Quest MX10S subwoofer, showcasing its compact, rectangular cabinet with a textured dark grey finish and rounded edges. A prominent circular port is visible on the front baffle, and four cylindrical feet support the unit from below.
Key Specifications
| Impedance | 8Ω |
|---|---|
| Transducer | 10" LF |
| Power | 300W RMS |
| Mounting | Wall or Ceiling |
| Design | Low Profile |
Detailed Specifications
| Colours | WHITE (RAL9003), BLACK (RAL9004) |
|---|---|
| Models | MX10SW, MX10SB |
| Frequency Response (-6dB) | 44Hz to 90Hz |
| Sensitivity - 1W @ 1m | 96dB |
| Maximum SPL @ 1m | 118dB |
| Power Handling (RMS/Peak) | 300W / 600W |
| Nominal Impedance | 8Ω |
| Transducers | LF: 254mm (10") Woofer |
| Dispersion (H° x V° -6dB) | Omnidirectional |
| Connections | Euroblock/Phoenix Connector - 5.08mm Pitch (In/Thru) |
| Rigging Points | None |
| Dimensions (H x W x D) | 262 x 470 x 500mm (19.6" x 19.7" x 10") |
| Weight | 15.1kg (33.3lb) |
| Cabinet Material & Finish | Birch Plywood with Low Sheen Polyurea Paint |
| Grille Material & Finish | Not Applicable (No Grille) |
| Shipping Dimensions (H x W x D) | 520 x 520 x 320mm (20.5" x 20.5" x 16.4") |
| Shipping Weight | 15.5kg (34.2lb) |
| Recommended Power Amplifier | Quest QX or QXD Amplifiers |
| Accessories (Included) | Euroblock/Phoenix Connector |
| Accessories (Available Separately) | White Mounting Plate (MP10SW) and Black Mounting Plate (MP10SB) |
Textual description of diagrams: Diagrams illustrating the subwoofer's dimensions and connection panel. The main dimensions are 262mm (Height) x 470mm (Width) x 500mm (Depth), with corresponding imperial measurements of 19.6 inches (Height) x 19.7 inches (Width) x 10 inches (Depth). A rear view highlights the Euroblock/Phoenix connector with a 5.08mm pitch for input and thru wiring. The bottom view shows four mounting points. The diagrams also show the woofer from the rear, indicating its 10" size and cone structure.
Accessories
White Mounting Plate
Model: MP10SW
Textual description of image: A circular metal plate with three suspension points extending upwards, designed for ceiling or wall mounting, in white finish.
Black Mounting Plate
Model: MP10SB
Textual description of image: A circular metal plate with three suspension points extending upwards, designed for ceiling or wall mounting, in black finish.
Product Description
The loudspeaker system is a passive subwoofer, housed within a birch plywood enclosure with a low sheen polyurea paint finish. It incorporates a 10" woofer. The subwoofer has a nominal impedance of 8 ohms and a power handling capacity of 300 W RMS, with a peak power rating of 600 W. Its frequency response (-6 dB) extends from 44 Hz to 90 Hz. The sensitivity is 96 dB SPL (1 W/1 m), with a maximum peak output of 118 dB SPL. The subwoofer provides omnidirectional dispersion. The connection panel incorporates Euroblock/Phoenix connectors with a 5.08 mm pitch to facilitate in/thru wiring. The subwoofer is available in White (RAL9003) or Black (RAL9004). The system's overall dimensions are 262 mm (H) x 470 mm (W) x 500 mm (D). The net weight is 15.1 kg. The subwoofer includes the Euroblock/Phoenix connector. White (MP10SW) and Black (MP10SB) mounting plates are available as optional accessories. The subwoofer models are the MX10SW (White) or MX10SB (Black) by Quest Engineering.
Quest Engineering reserves the right to make changes in specifications, or products without prior notice.
For more information, visit questaudio.com.au.
