Jabra Elite 7 Pro
Thank you for choosing Jabra Elite 7 Pro. We hope you enjoy the device!
Features of Jabra Elite 7 Pro
- Jabra MultiSensor Voice™ for revolutionary call performance
- Adjustable Active Noise Cancellation (ANC) and HearThrough
- Rich, powerful, and personalized sound
- Ultra-compact design for maximum comfort
- Up to 8 hours of battery life (up to 30 hours with charging case)
Overview of Jabra Elite 7 Pro
Jabra Elite 7 Pro
LEFT EARBUD
Diagram showing the left earbud with microphone ports and a button.
RIGHT EARBUD
Diagram showing the right earbud with microphone ports and a button.
Wireless Charging Case
Diagram showing the open charging case with slots for the earbuds and a USB-C port.
Qi-certified wireless charging
Diagram indicating the Qi wireless charging symbol on the case.
Included accessories
EarGels
Diagram showing different sizes of EarGels (S, M, L).
Diagram showing EarGels attached to the earbuds.
Fitting the earbuds
Diagram illustrating how to insert the earbuds into the ear, with the microphones pointing towards the mouth.
Diagram showing the correct placement of the earbud in the ear.
Replacing EarGels
It is recommended to use the MyFit test in the Sound+ app to find the best fit for optimal sound and ANC experience. If the fit is not right, try a different size EarGel. The fit should be light and comfortable; you may need a different size EarGel for each ear. Medium EarGels are pre-attached to the earbuds.
Diagram showing how to remove and attach EarGels to the earbuds.
Charging
Up to 8 hours of battery life on a single charge with ANC on, and a total of up to 30 hours with a full charge from the charging case. If you use your earbuds without ANC and HearThrough, the battery will last longer, allowing you to use the earbuds for up to 10 hours on a full charge, and up to 35 hours with the charging case.
Charging the earbuds
Place the earbuds in the charging case and close the lid. It takes up to 2.5 hours to fully charge the earbuds. The earbuds' LEDs indicate the current charging status by lighting up red, yellow, or green when the charging case is opened. The LED on the front of the charging case indicates the battery status of the charging case.
Diagram showing earbuds placed in the charging case with LED indicators.
Fast charging the earbuds
If the earbuds are low on battery, placing them in the charging case for 5 minutes will fast charge them, providing up to 1 hour of use. The battery level of the charging case must be at least 30% to fast charge the earbuds. You can check the current battery status of the earbuds and charging case using the Jabra Sound+ app.
Charging the charging case with a USB connection
It can take up to 2 hours and 30 minutes to fully charge the earbuds and charging case using the USB-C charging cable. The charging case operates with standard USB voltage (5V ± 0.25V). Charging the earbuds with higher voltage power sources is not recommended.
Diagram showing a USB-C cable being plugged into the charging case.
Charging the charging case with a Jabra wireless charging pad
The charging case is Qi-certified. Place the charging case in the center of the Jabra wireless charging pad. The LED on the charging case will flash to indicate correct placement. It can take up to 2 hours and 30 minutes to fully charge the earbuds and charging case.
Diagram showing the charging case placed on a wireless charging pad.
Meaning of LEDs
Diagram showing LED indicators on the earbuds and their meanings (battery levels, power on, power off, pairing, resetting).
Diagram showing LED indicators on the charging case and their meanings (battery levels, firmware update, firmware update error).
EARBUD STATUS
- High battery level
- Medium battery level
- Low battery level
Powering on the device
Powering off
Pairing
Resetting
BATTERY STATUS WHEN OPENING CHARGING CASE
- High battery level
- Medium battery level
- Low battery level
- Very low battery level (earbuds not charging)
CHARGING CASE STATUS WITH USB CABLE
- High battery level
- Medium battery level
- Low battery level
- Battery fully charged
- Firmware updating
- Firmware update error (see Section 7.16)
CHARGING CASE STATUS WITH WIRELESS CHARGING PAD
- High battery level
- Medium battery level
- Low battery level
- Firmware updating
- Firmware update error (see Section 7.16)
Note: When fully charged, the LEDs on the charging case and wireless charging pad will turn off.
Pairing
Pairing with a mobile device
Diagram showing the two earbuds and a Bluetooth symbol between them, with a 3-second indicator.
- Remove the earbuds from the charging case to power them on. Alternatively, press and hold the Left and Right buttons simultaneously to power on the earbuds.
- Press and hold the Left and Right buttons simultaneously until the earbud LEDs flash blue (3 sec). The earbuds are now ready to pair with your phone.
- Insert the earbuds and follow the voice pairing instructions to pair with your mobile device.
Usage
Powering the earbuds on/off
To turn off the earbuds, place them in the charging case. You can power on the earbuds by removing them from the charging case. The earbuds can also be manually turned off by pressing and holding the Left and Right buttons simultaneously. To power on each earbud individually, press and hold the Left or Right button (1 sec).
Music controls
| Left earbud | Function | Right earbud |
|---|---|---|
| Press and hold Left button | Decrease volume | |
| Play/pause music | Press the Right button when not on a call | |
| Increase volume | Press and hold the Right button | |
| Next track | Double-press the Right button while listening to music | |
| Restart track or previous track | Triple-press the Right button while listening to music. Repeat to skip to the previous track |
All button functions can be changed using MyControls in the Jabra Sound+ app.
Call controls
| Left earbud | Function | Right earbud |
|---|---|---|
| Press Left or Right button | Answer call | Press Left or Right button |
| Double-press Left or Right button | End/reject call | Double-press Left or Right button |
| Press Left or Right button | Mute/unmute microphone | Press Left or Right button |
| Press and hold Left button | Decrease volume | |
| Increase volume | Press and hold the Right button |
All button functions can be changed using MyControls in the Jabra Sound+ app.
ANC, HearThrough, and Voice Assistant controls
Diagram showing the left earbud with a button and its functions.
Left earbud
Press the Left button when not on a call
Function: Cycle through HearThrough, ANC*, and Off
Activate Voice Assistant (Siri, Google Assistant, Amazon Alexa)
All button functions can be changed using MyControls in the Jabra Sound+ app. *ANC must first be configured via the Jabra Sound+ app.
Adjustable Active Noise Cancellation (ANC)
Active Noise Cancellation (ANC) detects and analyzes ambient noise and generates an opposing anti-noise signal to cancel it out. This allows you to hear less of your surroundings while listening to music. Adjustable ANC must first be configured according to your specific listening profile via the Jabra Sound+ app.
Left button ANC
Diagram showing the Jabra Sound+ app interface with ANC slider.
Cycle through HearThrough, ANC, and Off
Press the Left button when not on a call
HearThrough
HearThrough allows you to hear your surroundings and talk to others without removing the earbuds. The microphones detect ambient sounds and transmit them to the speakers. HearThrough can be adjusted via the Jabra Sound+ app.
Left button HearThrough
Diagram showing the Jabra Sound+ app interface with HearThrough slider.
Cycle through HearThrough, ANC*, and Off
Press the Left button when not on a call
*ANC must first be configured via the Jabra Sound+ app.
Sidetone
Sidetone allows you to hear your own voice when you are on a call. The advantage of sidetone is that it lets you understand how loudly you are speaking. Sidetone is on by default for calls and can be turned on/off using the Jabra Sound+ app. The Sidetone on/off function cannot be controlled with the earbuds by default. However, it can be added to the earbuds using MyControls in the Jabra Sound+ app.
Single-earbud mode
The right or left earbud can be used alone for music or calls. To activate single-earbud mode, place the earbud you are not using into the charging case.
| Left button | Left earbud only | |
|---|---|---|
| Press and hold Left button | Cycle through HearThrough, ANC*, and Off | Press the Left button while listening to music |
| Press Left button | Answer call | |
| Double-press Left button | End/reject call | |
| Press Left button when not on a call | Mute/unmute microphone | |
| Double-press Left button when not on a call | Activate Voice Assistant | |
| Adjust volume via the connected mobile device | Adjust volume |
*ANC must first be configured via the Jabra Sound+ app.
| Right button | Right earbud only |
|---|---|
| Press the Right button while listening to music | Play/pause music |
| Press the Right button | Answer call |
| Double-press the Right button | End/reject call |
| Press the Right button when not on a call | Mute/unmute microphone |
| Double-press the Right button while listening to music | Next track |
| Triple-press the Right button while listening to music. Repeat to skip to the previous track | Restart track or previous track |
| Adjust volume via the connected mobile device | Adjust volume |
The left and right earbuds automatically reconnect when both are placed in your ears.
Automatic music and call pausing
Music is automatically paused when one of the earbuds is removed from your ear. To resume music from where it left off, place the earbud back in your ear within 60 seconds. If more than 60 seconds have passed, manually resume music by pressing the Right button.
Diagram showing music pausing when an earbud is removed and resuming when replaced.
Sleep mode
The earbuds automatically turn off to conserve battery if they are out of range of your mobile device for 15 minutes and are not in the charging case, or if they are inactive for 30 minutes. To exit sleep mode, press and hold the button on each earbud (1 sec). Alternatively, place the earbuds in the charging case and remove them again. Sleep mode can be configured from the Jabra Sound+ app.
Sleep mode
To save battery the headset can enter sleep mode when inactive or when not being worn.
Adjust how long the headset should wait before entering sleep mode.
- 15 minutes
- 30 minutes
- 1 hour
- 2 hours
- 4 hours
- 8 hours
- Never enter sleep mode
MyControls
MyControls is a feature within the Jabra Sound+ app that allows you to reassign any function to the buttons on either side of the earbuds, giving you the flexibility to configure your earbuds exactly to your personal preferences. The following functions cannot be controlled with the earbuds by default, but can be added to the earbuds using MyControls in the Jabra Sound+ app: Sidetone on/off, Hold current call and answer incoming call, Switch between a call on hold and an active call.
Managing multiple calls
The headset can accept multiple calls simultaneously.
Managing multiple calls
Press Left or Right button
End current call and answer incoming call
Double-press Left or Right button
Reject incoming call while on a call
Voice Assistant
Diagram showing the right earbud and its voice assistant function.
Right button Voice Assistant
Activate Siri, Google Assistant, Amazon Alexa (device dependent)
Double-press the Left button when not using call features
Voice guidance settings can be configured via the Jabra Sound+ app.
Voice guidance and languages
Voice guidance can be turned on/off and the language can be changed via the Jabra Sound+ app. Available languages: English, French, German, Japanese, Mandarin Chinese, Korean.
Updating firmware
The firmware of the Jabra Elite 7 Pro can be updated to the latest version via the Jabra Sound+ app. If you have enabled notifications in the Jabra Sound+ app, you will be notified when a new firmware update is available. If a firmware update fails, the LED on the charging case will flash red. To complete the update, connect the charging case to a power source, remove the earbuds from the charging case, place them back in the charging case, and close the lid. The firmware update will restart.
Resetting the earbuds
Resetting the earbuds clears the list of paired devices and resets all settings. 1. Place both earbuds in the charging case. 2. Press and hold the Left and Right buttons on the earbuds simultaneously until the LEDs flash pink (10 seconds). 3. Close the charging case lid for 5 seconds to complete the reset. The earbuds will need to be re-paired with your mobile device. Remember to unpair/delete the pairing from your mobile device's Bluetooth menu.
Jabra Sound+ app
Diagram of a smartphone displaying the Jabra Sound+ app, with icons for MySound, ANC/HearThrough/MyControls customization, and warranty registration. App store download buttons are visible.
Jabra Sound+ app
- Personalize your music with MySound
- Customize ANC, HearThrough, and MyControls functions
- Register your 2-year warranty
Support
FAQ
You can review frequently asked questions at Jabra.com/help/elite7
Care of your earbuds
- Always store your earbuds in the charging case and protected.
- To prevent battery depletion or capacity loss, do not leave the earbuds in hot or cold environments (e.g., a locked car in summer or outdoors in winter).
- It is recommended to always keep the earbuds between -20°C and 45°C (-4°F and 113°F).
- Do not store the earbuds for extended periods (up to three months) without charging them.
- If the earbuds or charging case become dirty, it is recommended to use a soft, lint-free cloth dampened with water for cleaning.
- The charging case operates with standard USB voltage (5V ± 0.25V). Charging the earbuds with higher voltage power sources is not recommended.
Replacement accessories
Replacement or additional accessories can be obtained from jabra.com/accessories.
Pair of replacement right and left earbuds
Charging case
EarGels
Jabra wireless charging pad
USB charging cables
Using replacement earbuds
- Place the replacement earbuds in the charging case and close the lid.
- Open the charging case lid and take out the earbuds.
- Insert the earbuds and follow the voice prompts to pair with your mobile device.
- Update the earbuds' firmware with the Jabra Sound+ app.
Using a replacement charging case
A replacement charging case must be synchronized with your existing earbuds and charged for 1 hour before first use. To initiate synchronization, place your existing earbuds into the charging case and close the lid for 10 seconds. When the LED on the charging case flashes pink, the firmware is updating. Wait for the LEDs to stop flashing pink before powering on the charging case.
