1. Interface Compatibility
Instruction: Ensure that the interface on your device is compatible with the HDMI cable connector.
The document displays images of an HDMI port on a device and an HDMI cable connector, emphasizing the necessity for a matching interface and connector.
2. Correct Connection Procedure
Instruction: Connectors must be inserted parallel to the interface. Avoid inserting them diagonally to prevent damage to the connector terminals and plastic housing.
Visual Guidance:
- OK: Insert parallel to the interface. ✔️
- NG (Not Good): Insert diagonally to the interface. ❌
Illustrations show the correct parallel insertion of an HDMI connector into a port and the incorrect diagonal insertion. Circles highlight the difference in alignment.
3. Troubleshooting Steps
If the cable is not functioning correctly, please follow these simple checks:
3.1 Connector Seating
Instruction: Verify that both ends of the cable are fully inserted into their corresponding interfaces and that there is no looseness.
An image demonstrates a cable connector fully seated within a port, accompanied by the text "Insert into interface completely".
3.2 Connector and Interface Cleanliness
Instruction: Check the cable connectors and device interfaces for dust or any other foreign matter. Clean them thoroughly before reconnecting.
A close-up image of an HDMI interface highlights dust particles within the connector pins, indicated by a red circle and the text "Dust at interface".
