Tribesigns: Get Affordable Home & Office Furniture Online-Tribesigns
Instruction Manual for Tribesigns models including: HOGA-JW0982X, JW0990X, JW0982X Shoe Cabinet, JW0982X, Shoe Cabinet, Cabinet
Tribesigns 20-Pair Shoe Cabinet Stylish Shoe Rack Organizer With Doors-Tribesigns
Tribesigns 5-Tier Sideboard Buffet, Farmhouse Kitchen Storage Cabinet-Tribesigns
File Info : application/pdf, 17 Pages, 1.20MB
DocumentDocumentDESIGNED FOR LIFE Assembly Instructions Shoe Cabinet Model No. HOGA- JW0982X JW0990X Little Tree by Tribesigns www.tribesigns.com Contact Us We're here to help you. support@tribesigns.com 1-424-220-6888 Contact us from 7 AM to 8 PM EST, Monday to Friday. Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, we're here to help. Please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible. Warm Tips 1. Carefully read these instructions and keep them for future reference. 2. Check the parts list and confirm everything's there before starting assembly. 3. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches. 4. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment. How to Get the Assembly Video Step 1 Scan the QR code. Step2 Search with the Model No. (on the bottom left corner of the title page) HOGA-JW0982X Installation Video Note: If you can't find the assembly video, please contact us. P-01 X2 We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. Install the Anti-Tip Straps Using the anti-tip straps can reduce the risk of tipping over, but can not eliminate it. P-02 Caution Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact us for a free replacement if you encounter any damaged or missing parts. P-03 Parts List P-04 Hardware List A B C D E F M6x35mm Ø15x12mm 28 pcs 28 pcs Ø8x30mm 8 pcs G H I 2 pcs J Ø3.5x14mm 36 pcs K 16 pcs L Ø4x18mm 2 pcs 4 pcs Ø8x22mm Screwdriver 12 pcs 4 pcs 1 pc 1 pc P-05 Installation of Cams and Pins Step 1-2: Align the plastic part with the mounting hole and press it in. If you can't press it in, loosen the screw counter clockwise or completely remove the screw from the plastic part and try again. Step 3-4: After pressing the plastic part into place, use a screwdriver to tighten the screw clockwise. A screw plastic screw insert No gap Step1 Step2 Step3 Step4 Screw the pin into the hole. Set the cams correctly by aligning the head of the cams with the lock pins. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit. Step 1 Step 2 Step 3 A B P-06 1 1 x4 2 Step 1 A Step 2 B Step 3 1 3 x2 A M6x35mm 8 pcs B Ø15x12mm 4 pcs 1 P-07 3 3 4 2 2 B Ø15x12mm 4 pcs 3 A 3 B J Ø8x22mm 4 pcs J P-08 5 4 A M6x35mm 8 pcs 6 Step 1 A Step 2 B Step 3 A B 3 M6x35mm Ø15x12mm 6 pcs 8 pcs 4 C 4 pcs AC AA CA AC CA 4 P-09 7 Step 1 A Step 2 B Step 3 5 7 6 4 8 8 8 6 P-10 9 A A A C A C A C 9 A C A C 10 9 B B B B BB P-11 11 F 9 F F F F F F F F F F F F F F F F 12 10 10 10 10 P-12 13 12 11 14 9 12 11 To prevent the door hinge from falling off,please install 4 screws P-13 Step 1 Open the door. Top panel Door Side panel ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL). Step 2 Adjust the door panel to be flush with side panel and top panel edge. Step 2a MOVE DOOR OUT Top panel Top panel Door Step 2b MOVE DOOR IN Top panel Door Door Side panel Loosen the screw indicated a little, adjust the hinge to the right position (see step 2a & 2b), then tighten the screw. Top panel Door Side panel Pull the hinge forward a little. Top panel Door Side panel Push the hinge back a little. Step 3 Adjust the gap between the door panel and the side panel. Top panel Step 3a MOVE DOOR LEFT too big gap Top panel Door Step 3b MOVE DOOR RIGHT too small gap Top panel Door Door Side panel Loosen or tighten the screw indicated a little to adjust the gap between the door panels, adjust the hinge to the right position (see step 3a & 3b). Door Top panel Side panel Turn the screw clockwise a little as shown to make the gap smaller Top panel Door Side panel Turn the screw counterclockwise a little as shown to make the gap bigger P-14 15 16 P-15 DESIGNED FOR LIFE Thank you for your support! Contact our customer service team support@tribesigns.com www.tribesigns.com 1-424-220-6888 7 AM to 8 PM EST, Monday to Friday Follow Tribesigns Facebook Instagram Pinterest Twitter YouTube TikTok WhatsApp