INSTALLATION MANUAL
E-1200 System
Connecting System Inflow
This section details the connections for the system inflow, including necessary parts and their assembly.
| Item | Part Name / SKU |
|---|---|
| 1 | 3/4" Insert x 3/4" MPT Adapter (Straight or Elbow) (SKU: P-1028 or P-1029) |
| 2 | Hose Clamp to secure #1 to #3 (SKU: P-1038) |
| 3 | 3/4" Reinforced Tubing – Cut to size (SKU: T-1040) |
| 4 | Hose Clamp to secure #3 to #5 (SKU: P-1038) |
| 5 | 3/4" Insert x 3/4" MPT Adapter (Straight or Elbow) (SKU: P-1028 or P-1029) |
| 6 | Filter Housing 3/4" FPT and 10" Polypropylene Filter (SKU: F-1015 and F-1020) |
| 7 | 3/4" Insert x 3/4" MPT Adapter (Straight or Elbow) (SKU: P-1028 or P-1029) |
| 8 | Hose Clamp to secure #7 to #9 (SKU: P-1038) |
| 9 | 3/4" Reinforced Tubing – Cut to size (SKU: T-1040) |
| 10 | Hose Clamp to secure #9 to #11 (SKU: P-1038) |
| 11 | 3/4" Insert x MPT Adapter (Straight) (SKU: P-1028 or P-4401) |
| 12 | E-1200 System |
| A | Mounting Kit for Filter Housing (SKU: E-3195) |
| B | E-1200 Mounting Bracket (SKU: E-1072) Mounting Screws – Quantity: 4 (SKU: P-1103) Washers – Quantity: 4 (SKU: P-3189) |
Connecting System Outflow
This section describes how to connect the system outflow, including required components and important notes.
| Item | Part Name / SKU |
|---|---|
| 1 | E-1200 System (SKU: E-1200S) |
| 2 | 3/4" Insert x MPT Adapter (Straight) (SKU: P-1028 or P-4401) |
| 3 | Hose Clamp to secure #2 to #4 (SKU: P-1038) |
| 4 | 3/4" Reinforced Tubing - Cut to size (SKU: T-1040) |
Note: Water outflow can be connected to a holding tank for distribution. If connecting to a hose or PVC, it must be open ended without back pressure. Back pressure can damage the system.
Connecting Additive Tank
Instructions for connecting the additive tank to the E-1200 System.
| Item | Part Name / SKU |
|---|---|
| 1 | E-1200 System (SKU: E-1200S) |
| 2 | 1/4" OD Silicone Tubing (SKU: T-1126) |
| 3 | Foot Valve Strainer (SKU: P-1026) |
| 4 | Additive Tank (SKU: B-1001 or B-1002) |
* Silicone tubing comes connected to E-1200 system.
- Open front door to system. To open door, push down on latch until clicks. Rotate latch and open front door.
- Find silicone tubing lying on floor of inside chamber. Place end of tubing through hole of floor as depicted above.
Note: Water outflow can be connected to a holding tank for distribution. If connecting to a hose or PVC, it must be open ended without back pressure. Back pressure can damage the system.
Parts and Accessories
(for replacement parts, visit: store.ecoloxtech.com)
Fittings
| Part Name / SKU | Quantity |
|---|---|
| 3/4" Insert x 3/4" MPT Adapter Straight (SKU: P-1028) | 5 |
| 3/4" Insert x 1/2" MPT Adapter Straight (SKU: P-4401) | 2 |
| 3/4" Insert x 3/4" MPT Adapter Elbow (SKU: P-1029) | 2 |
| Foot Valve Strainer, 1/4" OD (SKU: P-1026) | 1 |
Tubing
| Part Name / SKU | Quantity |
|---|---|
| 3/4" Reinforced Tubing, 70 psi (SKU: T-1040) | 10 feet |
Filter Housing, Filter, & Mounting Kit for Filter Housing
| Part Name / SKU | Quantity |
|---|---|
| Filter Housing 3/4" FPT (SKU: F-1015) | 1 |
| 10" Polypropylene Filter Cartridge (SKU: F-1020) | 1 |
| Filter Housing Mounting Bracket (SKU: P-1124) | 1 |
| Sheet metal screws, Phillips pan head, Stainless steel 18-8, #14 x 1-1/4" (SKU: P-1103) | 8 |
| Conical anchor, plastic, ribbed, #14-#16 x 1-1/4" (SKU: P-3191) | 4 |
E-1200 System Mounting Bracket
| Part Name / SKU | Quantity |
|---|---|
| EWCO 1200 Mounting Bracket (SKU: E-1071) | 1 |
| Sheet metal screws, Phillips pan head, Stainless steel 18-8, #14 x 1-1/4" (SKU: P-1103) | 4 |
| Flat washers, Stainless steel 18-8, 1/4" (SKU: P-3189) | 4 |
| Conical anchor, plastic, ribbed, #14-#16 x 1-1/4" (SKU: P-3191) | 4 |
| Metric machine screws, Phillips pan head, Stainless steel A-2, 4mm x 0.7mm x 8mm (to secure system in mount) (SKU: P-2185) | 4 |
Installation Accessories
| Part Name / SKU | Quantity |
|---|---|
| Teflon Thread Seal Tape (SKU: P-1042) | 1 |
| Titanium Hose Clamp SAE #12 (SKU: P-1038) | 7 |
| 3/16" Masonry Drill Bit (SKU: P-3186) | 1 |
| 5/16" Masonry Drill Bit (SKU: P-3187) | 1 |
Tools Needed
| Name | Function |
|---|---|
| Ratcheting PVC Pipe Cutter | Cutting Reinforced Tubing |
| Wire Cutter | Cutting Wire in Reinforced Tubing |
| Tongue and Groove Pliers | Tightening Fittings |
| Flat head Screwdriver | Tightening Hose Clamps |
| Phillips Screwdriver | Mounting Brackets |
| Electric Drill / Driver and Phillips Screwdriver Bit | Mounting Brackets |
