Installation Instructions
Follow these steps to correctly install your product accessory.
Step 1: Prepare Accessory Housing
Insert two [Accessory Item]s into the [Accessory Housing].
[Diagram Description: Shows two accessory items being inserted into a designated housing or compartment.]
Step 2: Insert Additional Items
Insert two more [Accessory Item]s into the [Accessory Housing].
[Diagram Description: Shows two more accessory items being inserted into the same housing or compartment.]
Step 3: Secure with Locking Pins
Insert the [Accessory Item]s into the [Accessory Housing], ensuring that the locking pins are aligned in the same holes.
[Diagram Description: Shows the accessory item being placed into the housing, with a close-up indicating that small locking pins must align with corresponding holes.]
Step 4: Attach Package and Secure
Install the [Package/Bag] onto the [Accessory Item]. Place the tube under the mattress and wrap the rope around the mattress. Secure and fasten the rope to the mattress.
[Diagram Description: Illustrates attaching a package or bag to the assembled accessory, then placing a tube under a mattress and wrapping a rope around it, finally securing the rope.]
Installation Complete.
Safety and Usage Guidelines
Please adhere to the following guidelines for safe and effective use.
Pre-Installation and Usage Checks
- Ensure all fittings are complete before installation.
- Before use, verify that fasteners are properly installed and tightened, and that all clips are at the same height.
- Use the product only on a smooth, stable surface.
Safety Precautions
- Prioritize safety during use.
- If necessary, arrange for nursing staff or another person to assist with use.
- Individuals with limited mobility or elderly users should be accompanied by others to prevent secondary injury caused by improper use.
Maintenance and Replacement
- Periodically check for loose fasteners and wear on the pad.
- If any parts are worn or loose, replace them promptly.
