7" HD Screen Video Baby Monitor

Model: SM70PTZ

1. WARNING AND SAFETY INSTRUCTIONS

Follow these safety precautions to prevent fire, injury, or damage to the product. Read and keep instructions; it is very important that you read all the safety and operating warnings.

⚠️ WARNING: STRANGULATION HAZARD: Children can become entangled in cords. Make sure the baby unit, parent unit, and mains adapter cables are kept out of reach of your baby and other young children at all times, at least 6 feet away.

CHOKING HAZARD: This product contains small parts which may cause choking. Exercise care when unpacking and assembling the product and keep the small parts away from children.

RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children.

DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Never place the baby unit or parent unit inside your baby's crib, bed, or playpen.

DO NOT HANDLE ROUGHLY, DROP OR THROW: The baby monitor is a high-quality electronic device which must be handled with care.

WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or place the product in or near moisture or water.

THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your video monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child.

VENTILATION: This product should not be used on a bed, sofa, rug, or similar surface that may block the ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Never cover the product with clothes, towels, blankets, or any other item.

THIS PRODUCT IS NOT A TOY: It should be kept out of children's reach.

KEEP AWAY FROM SOURCES OF HEAT: This unit should not be exposed to direct heat sources such as a candle, stove, radiator, heat register, or other appliance that emits heat. The unit should not be left in direct sunlight.

BATTERY:

Before you use the product, we recommend you fully charge the battery of the parent unit, so that it continues to work if you disconnect it from the power supply to carry it to another location.

INSTALLATION LOCATION:

The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi-Fi routers, otherwise they could cause interference. If this occurs, move the baby and parent units to another location.

RANGE:

Range of all baby monitors is always measured in an open space. The actual range may be shortened due to environmental obstacles (such as concrete walls).

DAMAGE REQUIRING SERVICE:

This product should be serviced by qualified personnel only. DO NOT TRY TO OPEN AND REPAIR THE PRODUCT. If you have any problems with the product, please contact the authorized distributor. In case of unusual noises or smells originating from the device, immediately disconnect the product from the power outlet and contact authorized service. If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care not to allow water into any openings.

IMPORTANT:

This baby monitor is designed only for hearing the baby's voice and seeing the images of the baby. This product is not a medical device and should not be used as a substitute for responsible adult supervision. It is important that you regularly check on your baby personally.

1.2 Safety Instructions for AC Power Adapter:

The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register, or other appliance that emits heat. During continual use, the power adapters may become warm to the touch. This is normal and should not be a cause of concern. Examine the intactness of the power cord and its plug. The adapter must be handled with care: do not handle roughly, drop, or throw. When removing the power adapter from the wall outlet, hold and pull from the receptacle. Do not pull on the cable itself or bend the cable, as that will put additional stress on the cable and could lead to damage. Do not touch the power adapter with wet hands or allow liquids to spill on it. Make sure the mains adapter cables are kept out of reach of your baby and other young children at all times. To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Do not replace the plugs or cable on your power adapter. This product should only be used with the AC power adapter supplied by the manufacturer, as included in this package. Never cut, damage, or bend the power cord. Do not put any objects on top of the power cord, which could cause overheating, damage, combustion, and electric shock. Do not leave the power adapter connected to the wall outlet when it is not plugged into the baby or parent unit.

Warning: Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution. Do not place the AC adaptor cable in a high wear and tear location. Never use a frayed or compromised cord. Intended for indoor use only.

1.3 Safety Instructions for Li-ion battery (Non-removable pre-installed battery):

Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water and seek medical assistance. The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat register, or other appliance that emits heat. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use only the battery pack supplied with the product or the same type, sold by the manufacturer or its authorized distributors. Improper use or use of unapproved batteries may present a risk of fire, explosion, or other hazards, and may invalidate the warranty. If you believe the battery is damaged, remove the product from charge and stop using the product. Never use a damaged battery.

1.4 Information on disposal of product:

Always dispose of your product (with the non-removable pre-installed battery) at the end of its life in an environmentally responsible way and in accordance with your local waste disposal requirements. All cardboard and paper packaging materials should be recycled in accordance with your local council waste regulations.

2. PRODUCT OVERVIEW

2.1 Parent unit overview:

The parent unit features controls for operation:

Volume Up [⬆️]: Press Volume+ to increase the volume.
OK Key [✔️]: Press the OK key to confirm.
Brightness Down [?⬇️]: Press the Bright- to decrease the brightness.
Volume Down [?⬇️]: Press volume- to decrease the volume.
Menu [☰]: Short press the menu key to access the menu; press again to exit. Press and hold the Menu key for approximately 2 seconds to operate Zoom in/out.
Power & Charging LED: Indicates power and charging status (Red for charging when display is off, Orange for charging when display is on, Green when battery is fully charged).
Microphone [?]: Collects the parents' voices when talking to the baby.

Other controls include:

Power Key [?]: Long press to turn on/off the monitor; short press to turn the screen on/off.
Pan/Tilt [↔️↕️]: Press the key to enter the Pan/Tilt mode.
Brightness Up [?⬆️]: Press the Bright+ to increase the brightness.
Speaker [?]: Hear the sound from the baby.
Talk to baby [?️]: To talk, press and hold the talk key on the front of the monitor.
DC Jack: Connect the Power Adapter to the monitor and a socket to charge.
Stand: A monitor placement stand.
Battery Door: Access to the battery compartment.

2.2 Baby unit overview:

The baby unit includes:

Light sensor
Infrared LEDs
CMOS lens
Microphone [?]
Speaker [?]
DC jack
Pairing key [?]
Temperature sensor [?️]
Antenna [?]

2.3 Icon overview:

The monitor displays various icons:

? Lullaby
?️ VOX
↔️↕️ Zoom
? Camera
⚙️ Setting
°C/°F Temp C/F
⏰ Time Format
? Brightness
⏳ Timer
? Alert Volume
? Frequency Setting
?️ Temp

2.4 Product list:

The package includes:

Parent Unit x1
Baby Unit (Camera) x1
AC Power Adapter x2
Screw Set x1
Wall mount shim x1
User Manual x1

Visual representation of the Baby Unit and Parent Unit, along with the included accessories: User Manual, AC Power Adapter, Wall mount shim, and Screw Set.

3. POWERING ON YOUR PRODUCT

Follow these steps to set up your baby monitor:

Step 1: Charge the baby unit. Connect the power adapter to the baby unit and a power outlet.
Step 2: Power on the parent unit. Press and hold the power button [?] for two seconds.
Step 3: Set the parent unit to prepare for connecting.
Step 4: Pair the units. Press the PAIR button [?] for two seconds until the pairing symbol appears.

NOTE: If the baby unit and parent unit have already been connected, steps 3 and 4 are unnecessary.

4. USING THE BABY MONITOR

4.1 Music setting:

You can play lullabies for your baby:

Press the menu button [☰] to access the menu.
Select the lullaby you want to play and press [✔️].
Press the NAVIGATION keys [⬆️⬇️] to select the duration and music volume.
To stop the lullaby playback, select the stop option.
Press the menu button [☰] to exit the menu.

NOTE: The lullaby default setting is off.

4.2 VOX setting:

The VOX function activates the monitor when sound is detected:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the VOX setting.
Press the UP [⬆️] or DOWN [⬇️] key to select the VOX level.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

NOTE: To resume the video and audio signal manually when VOX is active, briefly press any key on your parent unit.

4.3 Zoom in/out setting:

Adjust the camera's zoom level:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the zoom setting.
Press the UP [⬆️] or DOWN [⬇️] key to select the magnification level (e.g., 1x, 2x, 4x).
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.4 Split screen:

View multiple cameras simultaneously (if paired):

Press the menu button [☰] to access the menu.
Press [✔️] to choose the split screen option.
Press the UP [⬆️] or DOWN [⬇️] key to select the desired display option (e.g., Single View, Dual View).
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

NOTE: This function is only available when two or more cameras are paired.

4.5 Add camera:

Pair an additional camera to your monitor:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the 'Add camera' option.
Press the UP [⬆️] or DOWN [⬇️] key to select the camera to be paired.
Press [✔️] to start the pairing. The screen will show 'pairing'. Then, press the PAIR button [?] on the back of the camera.
Press the menu button [☰] to exit the menu.

NOTE: Before you begin pairing, make sure the baby and parent units are side by side and turned on.

4.6 Delete camera:

Remove a paired camera:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the 'Delete camera' option.
Press the UP [⬆️] or DOWN [⬇️] key to select the camera to be canceled.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.7 Temp unit setting:

Set the temperature unit (°C or °F):

Press the menu button [☰] to access the menu.
Press [✔️] to choose the temperature unit setting.
Select °C or °F and press [✔️].
Press the UP [⬆️] or DOWN [⬇️] key to confirm the selection.
Press the menu button [☰] to exit the menu.

4.8 Temp alert setting:

Configure temperature alerts:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the temperature alert setting.
Select the desired temperature range (e.g., Low Temp Alert, High Temp Alert) and press [✔️].
Press the UP [⬆️] or DOWN [⬇️] key to set the maximum and minimum alarm temperatures.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.9 Time Setting:

Set the time format (12H or 24H):

Press the menu button [☰] to access the menu.
Press [✔️] to choose the time setting.
Press the UP [⬆️] or DOWN [⬇️] key to select 12H or 24H.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.10 Language setting:

Change the display language:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the language setting.
Press the UP [⬆️] or DOWN [⬇️] key to select the desired language.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.11 Timer setting:

Set a timer for alerts:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the timer setting.
Press the UP [⬆️] or DOWN [⬇️] key to select the desired alert time (e.g., 1h, 2h, 3h, 4h, 6h).
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.12 Alert volume setting:

Adjust the alert volume:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the alert volume setting.
Press the UP [⬆️] or DOWN [⬇️] key to select the desired alert volume.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

4.13 Frequency setting:

Set the transmission frequency:

Press the menu button [☰] to access the menu.
Press [✔️] to choose the frequency setting.
Press the UP [⬆️] or DOWN [⬇️] key to select 50Hz or 60Hz.
Press [✔️] to confirm.
Press the menu button [☰] to exit the menu.

Controls Summary:

Volume/Brightness adjustments: Press [⬆️] or [⬇️] to increase/decrease the sound of the parent unit. Press [?⬆️] or [?⬇️] to increase/decrease the brightness of the parent unit.
Switching between paired baby units: Briefly press the switch button [?] on your parent unit.
Scan mode: Press and hold the scan button [?] to activate automatic scan mode. Press the scan button [?] again to deactivate scan mode.
Talk to baby [?️]: Press and hold the talk button to speak to your baby. Release the button when you are finished talking.

5. TROUBLE SHOOTING

Issue	Troubleshooting Steps
No reception on the Parent Unit	The power adapters may not be properly connected. Ensure that the Baby and Parent Units are ON. Make sure the Baby Unit and Parent Unit are not far away from each other. Baby Unit and Parent Unit may not be properly paired. Follow PAIRING instructions.
Interference or poor reception	Move the Baby Unit closer to the Parent Unit. The Baby or Parent Unit may be too close to metal objects. Other electronic devices may be interfering with the signal. The battery power may be too low.
Image frozen on the Parent Unit	Restart the Baby Unit (pull out the power adapter from the wall outlet, wait for approx. 5 seconds, and plug it back in). Reset the Parent unit by opening the battery compartment and disconnecting the battery. Wait for 30 seconds and then reconnect the battery.
A high pitched ear-piercing noise is heard from the units (feedback, static)	The Baby Unit and Parent Unit may be too close to each other; move them further apart. The volume on the Parent Unit may be set too high.
Cannot hear the baby sounds on the Parent Unit	Volume setting on the Parent Unit may be too low. Increase the volume.
Background noises	In a quiet environment surrounding the Parent Unit, decrease the volume on your Parent Unit to level 3 and below. In a loud environment surrounding the Parent Unit, increase the volume on your Parent Unit to the maximum level.

If the above tips do not help, the system may have crashed. Please disconnect the battery and the power adapter from your unit, then plug them in again and turn your unit on.

6. TECHNICAL DATA SHEET

Specification	Details
Frequency	2.4GHz
Type of modulation	GFSK
Transmission range	Up to 960 feet / 300 meters (Open space - No obstructions)
Input voltage	5V, 1/1.2A
Power adapter	Input: 100-240VAC 50/60Hz, 200mA Max
LCD screen	7" HD TFT LCD (1024*600 Pixels)
Rechargeable battery	Model: YB905560, 3.7V, 4000mAh
Transmission Power	18dB
Image sensor type	1/4" Color CMOS
IR LED Type	940 nm
Operating environment	Indoor use only; Temperature: 32-104°F / 0-40°C; Humidity: 5%-90%rh (relative humidity)

7. FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

8. Maintenance and Warranty

8.1 Maintenance:

All maintenance procedures should only be performed when the baby and parent units are unplugged and off. Clean the surfaces of the baby and parent units with a soft, fluff-free cloth. Never use cleaning agents or solvents. If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into any openings.

8.2 Warranty terms:

This product comes with a three-month warranty (replace or refund) and lifetime technical support from the original purchase date against defects in workmanship and materials. The warranty terms do not apply to any product that has been subject to abuse, misuse, negligence, or accident. For warranty or support issues, please contact the customer service of the Amazon seller before leaving your review.