Living Spaces Newport Chair Assembly Instructions
Product Code: 322843
Model: AS-22088-1S-WHITE NEWPORT CHAIR
Parts Included
| Part | Description | Quantity |
|---|---|---|
| A | Sofa Legs | X4 |
| B | Allen key | X1 |
| C | Bolts (M8×60mm) | X4 |
Assembly Steps
Step 1: Prepare the Chair Base
Turn the chair upside down. Locate the pre-drilled holes for the legs.
Step 2: Attach Sofa Legs
Insert the Sofa Legs (A) into the designated pockets on the underside of the chair. Ensure the legs are fully seated.
Step 3: Secure the Legs
Use the Allen key (B) to insert and tighten the Bolts (C) through the holes in the legs and into the chair base. Repeat for all four legs.
Diagram Description:
The diagram shows the underside of the chair with four attachment points labeled 'A'. A close-up view illustrates how a leg assembly (labeled 'A') is attached using a bolt (labeled 'C') and an Allen key (labeled 'B'). An arrow indicates that the leg should be inside after opening the pocket.
Diagram Description:
A line drawing of the assembled Newport Chair is shown.
Product Information
This document provides assembly instructions for the Living Spaces Newport Chair.
Estimated Assembly Time: 20 minutes [clock emoji]
Tools Required: Allen key (provided) [wrench emoji]
People Required: 2 [people emoji]
