Wall Mounted Climbing Frame Assembly Instructions
This document provides detailed instructions for assembling and installing your wall-mounted climbing frame. Please read all instructions carefully before beginning assembly.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Vertical side panel | 1 |
| B | Vertical side panel | 1 |
| C | Horizontal bar | 11 |
| D | Horizontal bar | 2 |
| E | Vertical side panel | 1 |
| F | Vertical side panel | 1 |
| G | Connector piece | 22 |
| H | Black screw | 8 |
| I | Connector piece | 2 |
| J | Connector piece | 2 |
| K | Small bracket | 4 |
| L | Long screw | 8 |
| M | Washer | 4 |
| N | Allen key | 1 |
| O | Screw | 4 |
| P | Screw (M10x100MM) | 4 |
| Q | Screw (M8x80MM) | 4 |
| R | L-shaped bracket | 1 |
Assembly Steps
Step 1: Assemble Side Panel A
Take one vertical side panel (A). Attach two connector pieces (I) using four screws (O) and four washers (M). Ensure the connectors are oriented correctly as shown in the diagram. The diagram shows panel A with two 'I' connectors attached using 'O' screws and 'M' washers.
Parts used: A (x1), I (x2), M (x4), O (x4)
Step 2: Assemble Side Panel B
Take the second vertical side panel (B). Attach two small brackets (K) using four black screws (H). The diagram shows panel B with two 'K' brackets attached using 'H' screws. The screws are described as 'black'.
Parts used: B (x1), K (x4), H (x8)
Step 3: Attach Horizontal Bars to Side Panel A
Connect eleven horizontal bars (C) and two horizontal bars (D) to the assembled side panel (A/E). Use eight long screws (L) and two connector pieces (G) for this step. The diagram illustrates the placement of these bars and connectors, showing panel A/E with multiple 'C' and 'D' bars attached using 'L' screws and 'G' connectors.
Parts used: C (x11), D (x2), L (x8), G (x2)
Step 4: Side View of Partially Assembled Frame
This diagram shows the structure from the side, indicating the alignment of the horizontal bars. It displays the assembled frame from a profile view, showing the arrangement of the bars.
Step 5: Attach Remaining Horizontal Bars
Secure four more horizontal bars (C) to the frame using four screws (P) with M10x100MM dimensions. The diagram highlights the locations where these screws are inserted, showing the frame with additional 'C' bars attached using 'P' screws.
Parts used: C (x4), P (x4)
Step 6: Final Assembly and Wall Mounting
Attach the final horizontal bars (C) and the L-shaped bracket (R). The diagram shows the frame being positioned against a wall and secured. It also shows a close-up of the connection using four screws (Q) with M8x80MM dimensions. The final assembly includes attaching the remaining 'C' bars and the 'R' bracket, with the frame shown mounted to a wall using 'Q' screws.
Parts used: C (x1), R (x1), Q (x4)
