JINJUNYE BS-001 Countertop Ice Maker User Manual
Safety Precautions & Warnings
As with any electrical appliance, basic safety precautions must be followed to reduce the risk of fire, electrical shock, or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips:
- The refrigerant of this product is flammable, and the maintenance process must pay attention to the source of the fire and keep the room ventilated. Please do not use flammable items near the machine to avoid fire.
- There should be no obstacles around the machine and the ventilation unobstructed.
- Do not use any machinery or other means to accelerate the defrosting process other than that recommended by the manufacturer.
- Do not damage the refrigeration circuit of the machine.
- The insulation material of the cabinet is EPS, which is flammable. Please keep it away from fire sources and prohibit burning. It is recommended to ask professionals to dispose of it.
- Do not store explosives, such as flammable aerosols, in the appliance.
- Fill with potable water only.
- The refrigeration system contains refrigerant under high pressure; the refrigeration system must not be damaged, and the maintenance of the refrigeration system should be carried out by professionals.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Do not operate this appliance if it has a damaged cord. Only connect the ice maker to a properly polarized outlet.
- Make sure the plug is fully inserted into the receptacle. An extension cord is not recommended, as it may overheat and become a fire risk.
- Do not place hands or objects on or near the ice maker's evaporator when it is in operation.
- Do not run the power cord over carpeting or heat insulators. Do not cover the cord. Keep the cord away from high-traffic areas and never submerge it in water. Always turn off and unplug the ice maker from the power supply before cleaning and servicing.
- Exercise caution and make sure there is supervision when this appliance is being used near children. If the ice maker is brought in from the outside in the winter, allow the ice maker to warm up to your room's temperature for a few hours before plugging it in.
- Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or cause an explosion.
Important Security Tips
All safety notices describe potential hazards, tell you how to reduce your chances of being injured, and what can happen if the safety notices are not followed. When the ice machine is in use or making ice, please do not touch the evaporator, which may frostbite your skin. When using household appliances, basic safety regulations must be followed to reduce the risk of fire, electric shock, and injury to people or objects. Please read the following safety tips carefully before using the appliance.
- ☐ Do not use and operate the machine when the power cord is damaged.
- ☐ Use the correct power socket, and ensure that the power plug is fully inserted into the socket.
- ☐ When in use, please do not put the power cord on the carpet or heat-insulating objects, and do not cover the power cord. The power cord should leave the walking channel and not be immersed in water.
- ☐ We do not advocate the use of extension cords, which may cause overheating or fire; if you must use one, please use an extension cord of at least 1.5 square meters.
- ☐ Please cut off the power before cleaning or maintenance.
- ☐ When there are children nearby, it must be used with adult supervision.
- ☐ Please do not clean the ice machine with flammable liquids, which may cause fire or explosion.
- ☐ Please do not overturn the ice machine. If overturned, put the machine forward for 2 hours before turning it on.
- ☑ Before use, please press the drain plug tightly, otherwise it will lead to water leakage.
- ☑ If you move the ice machine from outdoors to indoors in winter, please wait a few hours for the temperature of the ice machine to rise to the same temperature as the room before turning on the power.
Ice Machine Electrical Risk ⚠
- ☐ Incorrect use of the power supply wire may present a risk of electric shock. If the power cord is damaged, please contact the after-sales service department.
- ☐ For your safety, this ice machine must be reliably grounded.
- ☐ The machine needs a standard 110V-120V~ 60Hz 10A power supply with grounding.
Application Scenario
This appliance is intended for household and similar purposes, e.g.:
- Kitchen areas of shops, offices or other workplaces;
- Customers of farms as well as hotels, motels and residential environments;
- Family hotel environment;
- Catering and similar non-retail applications.
Packing Content
The packing content includes:
- 1*ICE MAKER
- 1*USER MANUAL
- 1*ICE SCOOP
Accompanying illustrations show the ice maker unit, the user manual booklet, and an ice scoop.
Technical Parameters
| Parameter | Specification |
|---|---|
| Model | BS-001 |
| Climate Type | SN/N/ST |
| Security Level | I |
| Power supply | 110V-120V~ 60Hz |
| Maximum current | 0.85A |
| Rated power | 80W |
| Maximum deicing power | 165W |
| Refrigerant/liquid addition | R600a/20g |
| Vesicant | C5H12 |
| Insulation | EPS |
| Net weight | 13.7 lb |
| Gross weight | 15.4 lb |
| Shell | Plastic |
| Machine size (WXDXH) | 9.13inx11.81in*11.85in |
Parts Listing
The ice maker consists of the following parts:
- 1. Ice shovel: Used to pull ice.
- 2. Infrared detection ice full sensor: Detects ice blocks and indicates when the ice bin is full via a light on the display panel.
- 3. Ice basket: Used to store and move ice cubes.
- 4. Upper cover: Features a transparent window for viewing the interior.
- 5. Air outlet net: Ensures smooth airflow; should be at least 15cm away from objects.
- 6. Drain plug: Located at the bottom to drain water from the tank.
- 7. Upper limit position for adding water: Indicates the maximum water level mark.
- 8. Control Panel: The interface for operating the machine.
Diagrams illustrate the ice maker unit and its various components.
Control Panel
The control panel features the following indicators and buttons:
- A. Select ice cube size: Allows selection between small and large ice cubes.
- B. Power indicator: Illuminates when the unit is powered on.
- C. Ice full indicator: Lights up when the ice basket is full.
- D. Water shortage indication: Alerts the user to add water to the tank.
- E. On/Off button: Used to start or stop the ice-making process.
- F. Ice cube size selection button: (Functionally similar to A, for selecting ice cube size).
A diagram shows the layout of the control panel.
Ice Maker Cleaning
Before using this ice machine, it is highly recommended that you thoroughly clean the entire machine.
- Take out the ice basket.
- Open the drain plug to drain the water in the tank.
- Wipe the liner with diluted detergent, warm water, and a soft cloth.
- The exterior of the machine should be scrubbed frequently with diluted detergent and warm water.
- Dry the liner with another soft cloth.
- Close the drain plug.
When the machine is not used for a long time, the water in the inner tank should be drained and the inner tank should be wiped dry.
Operating Instruction (Before First Use)
- Remove all inner and outer packaging. Check for the ice basket, ice scoops, and if any accessories are missing, please contact customer service.
- Remove the ice basket and scrub in warm water, then clean the inside with warm water and a soft cloth.
- Clean the column of the evaporator with water.
- Place the ice maker out of direct sunlight and away from heat sources and radiation. Position the ice maker horizontally and ensure there is a gap of at least 15cm on both sides and the rear for ventilation.
- The location where the ice maker is placed should have a suitable outlet for power.
Operation Process
- Open the top cover, take out the ice basket, and add water to the water bladder to keep the water level below the maximum water level mark. Then, put the ice basket back and close the top cover.
- Press the "ON/OFF" key on the control panel to start making ice.
- Press the "Select" button to select the size of the ice cubes. If the room temperature is lower than 59°F (15°C), it is recommended that you choose small ice to prevent ice clumping.
- The duration of each ice-making cycle is 6 to 12 minutes, which depends on the size of the selected ice cubes and the room temperature. The size of the ice cubes is also related to the water temperature and ambient temperature. (Allow a little longer when making ice for the first time).
- After the ice machine is started, it is necessary to check the water level in the tank frequently. If the water pump fails to produce water, the ice machine will stop automatically, and the "add water" indicator light will illuminate to indicate water shortage. At this time, the water tank needs to be filled up, and then press the "ON/OFF" button to restart ice making.
- If the ice cubes in the ice basket are full, the ice-making will stop automatically, and the "ice full" light will illuminate. When the ice cube level drops below the infrared detection position, the machine will restart to work.
- It is recommended to change the water every 24 hours to keep the water clean. If the ice machine is not used for a long time, please empty the remaining water in the water tank.
- Automatic cleaning: In the case of the power light flashing, press and hold the ON/OFF button for 5 seconds. The 'S' and 'L' indicators will flash alternately, and the machine will start to clean automatically. The cycle lasts for 15 minutes. If you need to stop cleaning, manually press the ON/OFF button to end the process.
Advice: Use water that is directly potable.
Troubleshooting
| Symptoms | Possible Causes | Solution |
|---|---|---|
| "Add water" light is on | 1. Lack of water 2. Bottom filter of water tank is blocked | 1. Stop ice making, add water, press the "ON/OFF" button to restart ice making. 2. To clean. |
| "Ice Full" light on | 1. Too many ice cubes in the ice basket | 1. Remove the ice cubes from the ice basket. |
| "Ice Full" light on | 2. Ice full sensor broken, no ice, ice full light is always on | 2. Press and hold the "Select" button for more than 5 seconds to force the ice machine to open and run for 10 cycles, or contact the manufacturer to replace the sensor. |
| The "ice full" light is blinking | Ice shovel stuck | If the ice cube is stuck on the ice shovel, remove the ice cube. Otherwise, please consult the after-sales service personnel. |
| Ice cubes joined together | 1. Freeze cycle time is too long; 2. The evaporator is immersed too much in the ice box. 3. The water temperature in the tank is too low | 1. Stop ice making, after the ice cubes melt, restart ice making and select small ice. 2. Adjust the evaporator. 3. Replace the water in the tank. The water temperature is preferably between 46°F and 95°F. |
| The ice is full but the light does not show | The location where the machine is located has strong light, which affects the detection of infrared rays. | Move to a place with relatively low light. |
| The ice making process is normal, but no ice cubes are formed | 1. Ambient temperature or water temperature is too high 2. Refrigeration System Leaks 3. Refrigeration system clogged | 1. Please make ice when the ambient temperature is lower than 95°F, and add a certain amount of cold water to the water tank. 2. Contact after-sales service personnel. 3. Contact after-sales service personnel. |
Electrical Schematic
This section provides a technical diagram illustrating the internal electrical components and their connections. It details the main control board, water flow detection, sensors (infrared, limit, ambient temperature), compressor, fan, relays, and the operation display panel, showing how they are interconnected for the ice maker's functionality.
Customer Support
If there is any problem with the product, please feel free to contact JINJUNYE customer support at superbookie_service02@outlook.com. You can also scan the QR code provided in the original document to know more about JINJUNYE products.
