Yeelight Staria Bedside Lamp Pro User Manual

Product Description

The Yeelight Staria Bedside Lamp Pro features a lamp cap, a lamp arm, and a base. The lamp arm is connected via a rotary shaft with a 30° rotation angle. The base houses the wireless charging area, a wireless charging indicator, and an ON/OFF button.

Installation

Plug the adapter connector into the DC terminal, then connect the power.

Instructions

01 ON/OFF Button

Shortly tap the ON/OFF button to turn the product on or off.
When the light is on, long-tap the ON/OFF button to adjust the color temperature and brightness. More personalized settings are available in the Yeelight APP.
When the light is on, tap the ON/OFF button twice to activate Timer mode.

02 More Features

Night Mode

Set your own night mode in the app. The lamp will turn on automatically with a cozy nightlight during the preset night mode period. If not in the preset period, the lamp will return to the default state saved in the APP. The Night Mode is off by default. Please activate it in the Yeelight APP.

Wireless Charging

The wireless charging indicator will flash 3 times when the lamp is connected to the power supply with its original adapter.

Place your mobile phone in the wireless charging area. The mobile phone is charging when the yellow indicator light is on. If not, please adjust the phone to the proper position.

When the phone is fully charged, the yellow indicator light turns off, and wireless charging terminates.

Wireless Charging Indicator Status

Power on: The indicator flashes 3 times.
Charging: The indicator is on.
Charging completed or not charging: The indicator is off.
Error warning: The indicator flashes quickly.
Foreign object: The indicator flashes quickly.

03 Apple HomeKit Smart Control

Open the Home APP on your iPhone or iPad.
Tap "Add Accessories" and follow the instructions in the app to scan the QR code in the user manual or on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app access.

Make sure the Wi-Fi network is available and you can get access to the internet normally. This product is not compatible with 5G network.

To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above.

HomeKit codes are indicated under the base of the lamp. Please be noted that HomeKit codes are required for reset every time.

Apple is the trade mark of Apple LLC.

How to Reset

Tap and hold the ON/OFF button, and re-insert the adapter connector into the DC terminal until the light is breathing, then release the ON/OFF button.

Please reset the lamp before using it in a new network environment.

Basic Parameters

Name:	Yeelight Staria Bedside Lamp Pro
Rated input:	220-240V~50/60Hz 0.45A
Rated Power:	18W (Wireless Charging Module+LED modules)
CRI:	Ra95
Input:	12V 1.5A
Power factor:	0.5
Wireless connection:	Wi-Fi IEEE 802.11 b/g/n 2.4GhZ
Model No.:	YLCT03YL
Operating temperature:	-10 ~ 35°C
Operating humidity:	0%-85%RH
Color temperature:	2700 K-6000 K
Wireless charging output:	10W MAX
Wireless charging distance:	≤3.5mm
Compatible with:	Android 4.4 & iOS9.0 and above

Product Features

?️ Adjustable color temperature
? Adjustable brightness
? Cozy nightlight
? Foreign object detection
?️ Voice control
?️ Personalized schedule
⏱️ Smart timer
⚡ 10W fast charging

Warnings

Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The light will produce heat during operation. Please keep proper ventilation.
Using adapters other than the original one may cause product damage or safety hazards.
Do not tilt the lamp but place it smoothly.
Do not put battery or battery products near the wireless charging area in case of any potential safety hazard.
For household use only.
Class III Luminaire.
All the pictures shown in this manual are for reference only.

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLCT03YL is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.

Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

	Yeelight Staria Bedside Lamp Pro User Manual: Installation, Features, and Specifications Comprehensive user guide for the Yeelight Staria Bedside Lamp Pro (YLCT03YL). Covers product description, installation, operation instructions, wireless charging, Apple HomeKit setup, basic parameters, features, warnings, and compliance information.
	Yeelight Staria Bedside Lamp Pro User Manual User manual for the Yeelight Staria Bedside Lamp Pro, detailing product description, installation, operation, features, specifications, and safety warnings.
	Yeelight Staria Bedside Lamp Pro User Manual \| Smart LED Table Lamp Comprehensive user manual for the Yeelight Staria Bedside Lamp Pro (YLCT03YL), detailing setup, features, specifications, safety, and smart home integration.
	Yeelight LED Bedside Lamp D2 Посібник користувача та Технічні характеристики Детальний посібник користувача та технічні характеристики для настільної лампи Yeelight LED Bedside Lamp D2, що охоплюють налаштування, використання, функції, підключення та інформацію про гарантію.
	Yeelight D2 Bedside Lamp User Manual and Specifications User manual, specifications, and features for the Yeelight D2 Bedside LED Lamp, including setup, operation, connectivity, and safety information.
	Yeelight LED Bedside Lamp D2: Smart Lighting User Manual & Features Comprehensive user manual for the Yeelight LED Bedside Lamp D2, detailing setup, features like adjustable color and brightness, smart home integration (Google Assistant, Alexa, HomeKit), and safety information.
	Yeelight YLCT01YL LED Bedside Lamp User Manual User manual for the Yeelight YLCT01YL LED Bedside Lamp, covering product description, installation, instructions, smart control features (Yeelight App, Apple HomeKit), basic parameters, product features, warnings, warranty conditions, EU declaration of conformity, and WEEE disposal information.
	Smart Mi Yeelight Bedside Lamp User Manual and Specifications This document provides a comprehensive guide to the Smart Mi Yeelight Bedside Lamp, including setup instructions, operation details, smart control features, technical specifications, warranty information, and safety precautions.

Yeelight Staria Bedside Lamp Pro