Product Overview
The DS18 PRO-GM6 is a high-performance 6.5-inch mid-range loudspeaker designed for demanding car audio systems. It offers robust power handling with 140 Watts RMS and a maximum of 480 Watts, operating at an impedance of 8 Ohms.
Dimensional Drawings
Top View: A circular diagram illustrates the loudspeaker's top profile. The overall diameter is approximately 6.57 inches (167mm). The diameter for the front mount baffle cutout (mounting hole circle) is approximately 5.7 inches (145mm).
Side View: A side profile diagram shows the loudspeaker's construction. The overall depth of the unit is approximately 2.7 inches (69mm). The mounting depth, measured from the baffle surface to the deepest point of the magnet assembly, is approximately 2.5 inches (64mm). The voice coil diameter is specified as 1.5 inches (38.1mm).
Frequency Response Graph
The Sound Pressure Level (SPL) versus Frequency graph displays the loudspeaker's performance. The Y-axis represents SPL in decibels (dB), ranging from 0 to 100 dB, while the X-axis represents frequency in Hertz (Hz), from 20 Hz to 20 kHz. The graph shows a peak in the lower mid-range frequencies, indicating the loudspeaker's optimal operating range, with a specified frequency response from 100Hz to 10KHz.
Specifications
Specification | Value |
---|---|
Nominal Diameter | 6.5" |
Nominal Impedance | 8 Ohms |
RMS Power Handling | 140 Watts |
MAX Power Handling | 480 Watts |
Sensitivity (1w/1m) | 92dB |
Frequency Response | 100Hz-10KHz |
Recommended Hi Pass Crossover | 120 Hz |
Configuration | Single / Unit |
Motor Specifications
Motor Component | Material |
---|---|
Voice Coil Diameter | 1.5" / 38.1mm |
Voice Coil Former Material | Kapton |
Winding Material | CCAW |
Cone Material | Paper |
Dustcap Material | Paper |
Surround Material | Cloth |
Basket Material | Steel |
Basket Color | Matte Black |
Magnet Material | Ferrite |
Magnet Weight | 23 oz |
Thiele & Small Parameters
Parameter | Symbol | Value |
---|---|---|
Equivalent Volume | Vas | 5.58L / 0.197ft³ |
Free Air Resonance | Fs | 113Hz |
Mechanical Factor | Qms | 13.28 |
Electrical Factor | Qes | 1.068 |
Total Factor | Qts | 0.988 |
Mechanical Mass (moving mass) | Mms | 8.836g |
Mechanical Compliance | Cms | 0.226mm/N |
BL Factor | BL | 6.14 |
Voice Coil Inductance | Le | 0.726mH |
Cone Area | Sd | 132.73cm² |
DC Resistance | Re | 6.4 ohm |
Measurements
Measurement | Value |
---|---|
Overall Diameter | 6.57" / 167mm |
Overall Depth | 2.7" / 69mm |
Front Mount Baffle Cutout | 5.7" / 145 mm |
Mounting Depth | 2.5" / 64mm |
Motor Diameter | 4.33" / 110mm |
Additional Information
This product is Designed & Engineered in the USA.
For more information, please visit: DS18.COM
WE LIKE IT LOUD