Atrix Wireless Mouse User Guide

Product Information

Material: 105gsm double side art paper (C2S)

Color: Black + pantone cool gray 8c

Surface coating: glossy varnish

Dimensions: 6.25 inches width, 5.4 inches height

Product Overview

This guide provides instructions for the Atrix Wireless Mouse, covering its features, charging, and connectivity options.

What's Included

• USB-C Wired and 2.4G Wireless Dual Mode Gaming Mouse
• USB-C to USB-A charging cable
• USB-C to USB-A adapter
• 2.4Ghz Dongle (located on the bottom of the mouse)

Mouse Features

The mouse features the following:

• Left Click
• Middle Click & RGB Light up
• Increase DPI button
• Right Click
• USB-C Port
• Forward button
• 2.4Ghz Dongle
• Decrease DPI button
• Back button
• RGB Light up
• On/Off Switch

Adjusting DPI

Press the DPI button to adjust the DPI. The LED color will change to indicate the selected DPI setting:

• 800 DPI (Red)
• 1600 DPI (Blue)
• 3200 DPI (Green)
• 4800 DPI (Yellow)
• 6400 DPI (Cyan)
• 16000 DPI (Purple)

LED Indicators

• Flashing Yellow Light: Charging
• Flashing Red Light: Low Battery

Charging the Mouse

• Plug the USB-C end of the charging cable into the mouse.
• Plug the USB-A end of the charging cable into your computer.
• A full charge requires approximately 2.5 hours.
• The charging indicator light will flash yellow while charging and will return to the color indicated by the DPI setting once charging is complete.
• The mouse can be used while charging.

Wired and Wireless Function

• The mouse automatically switches between wired and wireless modes.
• When the 2.4Ghz dongle is plugged into your computer without a cable connection, the mouse operates in wireless mode.
• When a cable connects the computer to the mouse, it automatically switches to wired mode.

Important Safety Instructions

Follow basic precautions when using this product:

• Read all instructions carefully.
• Protect equipment from humidity.
• Use a soft dry cloth for cleaning; avoid chemical detergents.
• Unplug the device when not in use to prevent damage from electrical peaks.

Service Personnel Required for:

• Liquid penetration into the equipment.
• Exposure to humidity.
• Damage from dropping or other physical impact.
• Obvious signs of breakage.
• Equipment not functioning correctly or not operating according to the user manual.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

FCC ID for Dongle: 2A023-ME4 Model: ME4 Made in China

FCC ID for Mouse: 2A023-GSME04 Model: GSME04 Input: DC5V 500mA

Contact Information

Atrix

Geeknet, Inc.

625 Westport Pkwy, Grapevine, TX 76051

Phone: 855-474-7717

For questions or comments, or help getting set up, contact us at https://care.gamestop.com.