Atrix Wireless Full Size RGB Mechanical Keyboard User Guide

What's Included

• Wireless Full Size RGB Mechanical Keyboard with a 2.4Ghz Dongle
• USB-A to USB-C Power Cable

Need Help?

For questions or comments, or assistance with setup, contact GameStop at https://care.gamestop.com.

Keyboard Layout and Features

The keyboard features a full-size layout with dedicated multimedia keys and function keys.

Side of Keyboard

• Charge Input/USB-C Port
• Pairing button

Bottom of Keyboard

• Kickstands
• 2.4Ghz Dongle
• Power Switch: Left: On, Right: Off (Still works wired)

Top of Keyboard

• Caps Lock Indicator
• Scr. Lock Indicator
• Num. Lock Indicator
• Pairing Indicator
• Battery Indicator

Light Function Keys

• FN Key + INS: Cycle 15 preset keyboard light settings
• FN Key + HM: Cycle color modes within light settings
• FN Key + ESC: Hold for 5 seconds to reset to factory settings
• FN Key + WIN-L: Lock/Unlock Windows Key
• FN Key + Up Arrow: Increase Brightness
• FN Key + Down Arrow: Decrease Brightness
• FN Key + Left Arrow: Decrease LED Speed
• FN Key + Right Arrow: Increase LED Speed
• FN Key + Backspace: Turn on/off backlight

Keyboard Multimedia Keys

• FN Key + F1: My Computer
• FN Key + F2: Search
• FN Key + F3: Calculator
• FN Key + F4: Media Player
• FN Key + F5: Previous Track
• FN Key + F6: Next Track
• FN Key + F7: Play/Pause
• FN Key + F8: Stop
• FN Key + F9: Mute
• FN Key + F10: Volume -
• FN Key + F11: Volume +
• FN Key + F12: Lock keyboard

Keyboard LED Indicators

• Blinking Green: 2.4G Wireless Pairing Mode
• Solid Green: Successful 2.4G Wireless Pairing
• Blinking Red, Pink, Or Blue: Bluetooth Pairing
• Flashing Red, Pink, or Blue: Seeking Previous Connection
• Solid Red, Pink, or Blue: Successful Bluetooth Pairing
• Battery Indicator Solid Green Light: Charging
• Battery Indicator Solid Blue Light: Charging complete
• Battery Indicator Flashing Red Light: Low Battery

Using the Keyboard Wired

To use the keyboard wired, plug the USB-A end of the cable into your computer. Hold FN + 5 for three seconds; the indicator light will turn white.

Pairing the Keyboard

2.4Ghz Wireless Pairing

1. Insert the 2.4Ghz Dongle into your computer.
2. Power ON the keyboard and press the pairing button.
3. Hold FN + 4 for 3 seconds to enter pairing mode. The indicator light will flash green when ready to pair.
4. The keyboard is connected when the indicator light turns solid green.

Bluetooth Pairing

1. Power ON the keyboard and press the pairing button.
2. You can pair the keyboard to three different devices. Hold FN + 1, 2, or 3 for 3 seconds to enter pairing mode.
3. The indicator light will flash red, pink, or blue respectively when ready to pair.
4. Use your device's Bluetooth settings to pair with "BT3.0 KB" or "BT5.0 KB" (depending on your device's Bluetooth compatibility).
5. The keyboard is connected when the indicator light turns solid red, pink, or blue.
6. Once paired, the keyboard will automatically reconnect when turned on if it's in range and Bluetooth mode is active.
7. If the light is rapidly flashing, it is seeking the previous device to reconnect.

Charging the Keyboard

1. Plug the USB-C end of the charging cable into the keyboard.
2. Plug the USB-A end of the charging cable into your computer.
3. A full charge requires approximately 4 hours.
4. The charging light will turn solid green when charging is complete.

Note: The keyboard functions even when charging, regardless of the power switch position.

Product Information and Compliance

FCC ID for Dongle: 2A023-KB6 Model: KB6 Made in China

FCC ID for Keyboard: 2A023-GSKB06 Model: GSKB06 Input: DC5V 500mA

Important Safety Instructions

WARNING: Basic precautions should always be followed when using this product, including:

• Read these instructions carefully.
• Follow all cautions and warnings.
• Protect equipment from humidity.
• Do not use chemical detergents; clean with a soft, dry cloth.
• Unplug the device when not in use to avoid damage from electrical peaks.

Equipment requiring service:

• If liquid has penetrated the equipment.
• If the equipment has been exposed to humidity.
• If the equipment has been dropped or is damaged.
• If the equipment shows signs of breakage.
• If the equipment does not work correctly or as described in the user's manual.

SAVE THESE INSTRUCTIONS.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Atrix. Geeknet, Inc, 625 Westport Pkwy, Grapevine, TX 76051 Phone: 855-474-7717