Motorola Solutions MOTOTRBO™ DM4000/DM4000e Series Mobile Radios

Introduction

This Quick Reference Guide covers the basic operation of the radio. For more operational details and information, refer to the following User Guide(s): https://www.motorolasolutions.com/en_xa/products.html

Important Safety Information

RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios

Product Safety and RF Exposure Compliance

Caution: Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.

ATTENTION! This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations.

Computer Software Copyrights

The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions.

Radio Controls

1. On/Off/Information Button

2. Volume/Channel Knob

3. Display

4. Menu/OK Button¹

5. Scroll Up/Down Buttons¹

6. Speaker

7. Return/Home Button¹

8. Front Programmable Buttons

9. Accessory Connector

10. LED Indicators

¹ Not for Numeric Display models.

Turning the Radio On and Off

Press the On/Off button.

Adjusting the Volume

Rotate the On/Off/Volume Control Knob clockwise or counterclockwise.

LED Indicators

• Blinking Red: Radio has failed the self-test upon powering up, has moved out of range if Auto-Range Transponder System is configured, has Mute mode enabled, is receiving an emergency transmission, or is transmitting in low battery state.
• Solid Green: Radio is powering up, transmitting, or sending a Call Alert or an emergency transmission.
• Blinking Green: Radio is receiving a call or data, detecting activity over the air, or retrieving Over-the-Air Programming transmissions.
• Double Blinking Green: Radio is receiving a privacy-enabled call or data.
• Solid Yellow: Radio is monitoring a conventional channel or in Bluetooth Discoverable Mode.
• Blinking Yellow: Radio is scanning for activity, has Flexible Receive List enabled, has yet to respond to a Call Alert, or all Capacity Plus-Multi-Site channels are busy.
• Double Blinking Yellow: Radio has Auto Roaming enabled, has yet to respond to a Group Call Alert, is actively searching for a new site, is not connected to the repeater while in Capacity Plus, is locked, or all Capacity Plus channels are busy.

Display Icons

The following icons appear on the status bar at the top of the radio display. The icons are arranged left most in order of appearance or usage, and are channel-specific.

• Emergency: ?
• Scan: ?
• High Volume Data: ?
• Mute Mode: ?
• Tones Disabled: ?
• Ring Only: ?
• Notification: ✉️
• Response Inhibit: ?
• Secure: ?
• Unsecure: ?
• Site Roaming: ?
• Option Board: ⚙️
• Sign In: ?➕
• Sign Out: ?➖

² Not available for Capacity Max.

Notes