Product End of Life Instructions
VARIABLE SPEED DRIVE ATV650 IP55 45KW 400/480V DISCONNECT SWITCH
Altivar Process ATV600/900
Additional Information
Legal Information: This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed of according to the legislation of the country. This document is intended for use by end-of-life recyclers or treatment facilities. It provides basic information to ensure appropriate end-of-life treatment for the product's components and materials.
Purpose: This document is intended for use by professional end-of-life recyclers or waste treatment facilities. It provides basic information for proper end-of-life treatment of product components and materials.
In case of special transportation: No special transportation.
Recyclability potential: 85% (Based on "ECO'DEEE recyclability and recoverability calculation method", version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME).
Potential Disassembly Risks
The information provided in this document assumes the product is completely de-energized and uninstalled (refer to the instructions provided in the appropriate product manuals). Dismantling/disassembling the product may entail hazards caused by, for example, sharp edges, chemical aggression, or ejected parts.
WARNING
HAZARD DUE TO INSUFFICIENT PROTECTION
- Implement all safety measures required by applicable regulations and by the processes used to dismantle/disassemble and dispose of the product.
- Use all necessary personal protective equipment such as gloves and goggles.
Failure to follow these instructions can result in death or serious injury.
Disassembly Instructions
The following table details the components of the Altivar Process ATV600/900, their material, weight, and recommended end-of-life action:
| Recommendation | Number on Drawing | Component / Material | Weight (in g) | Comment |
|---|---|---|---|---|
| To be depolluted | 1 | Electronic Board (Power and Communication) > 10cm² | 2178 | |
| To be depolluted | 2 | LCD and all those back-lighted with gas discharge lamps | 25 | |
| To be depolluted | 3 | Other battery (Coin battery inside) | 2.9 | Lithium content: 0.07 g |
| To be depolluted | 4 | Cable (high current) | 2138 | |
| To be depolluted | 5 | Electrolyte capacitors which size: height > 25 mm, diameter > 25 mm or proportionately similar volume | 1090 | |
| To be dismantled | 6 | Steel | 31774 | Housing, Front door, Cover, Ground plate, Support, Bar |
| To be dismantled | 7 | Aluminium | 6193 | Heatsink, Bar |
| To be dismantled | 8 | PC, ABS-PC, PA, PA6, HDPE, SAN with or without additive, PP+EPDM and PP | 1483 | Housing, Chassis, Front cover |
| To be dismantled | 9 | Copper | 227 | Bar |
| Other | 5889.1 | Bar |
Product Description
Manufacturer Identification: Schneider Electric Industries SAS
Brand Name: Schneider Electric
Representative Product: VARIABLE SPEED DRIVE ATV650 IP55 45KW 400/480V DISCONNECT SWITCH - ATV650D45N4E
Product Function: The main function of the Altivar Process product range is the speed control and variation of a synchronous, asynchronous, or reluctance electric motor for fluid management and industrial applications.
Description of the range: This range consists of products Altivar 650 and Altivar 950 with ratings from 30 to 45 kW for operation on 400V/480V, 3-phase supplies IP55.
Total representative product mass: 51000 g
Representative product dimensions: 910 mm x 290 mm x 401 mm
Accessories: No accessories needed.
Date of Information Release: 11/2021
Schneider Electric Industries SAS
Country Customer Care Center: http://www.schneider-electric.com/contact
35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
RCS Nanterre 954 503 439
Capital social 896 313 776 €
Published by Schneider Electric
© 2021- Schneider Electric – All rights reserved
