HUMMER H-190 CPU Cooler

Important Announcement

Please read this user's manual carefully before installation to ensure the cooler's best performance through optimized installation. NOX Xtreme is not responsible for any damage to the product or injury caused by incorrect installation or user carelessness. The cooler may cause interference with some motherboards; if interference occurs between the HUMMER cooler and your motherboard, stop installation. Be careful not to hurt yourself on the sharp fins during installation and disassembly. Do not move the cooler after installation to prevent CPU damage. Do not use the cooler for any purpose other than its original intended use.

Components Description

• 1) CPU Cooler x 1
• 2) Intel Mounting Bracket x 1
• 3) Push Pin Male x 4
• 4) Push Pin Female x 4
• 5) Second Fan Mounting Clip x 2
• 6) Thermal Grease x 1

Installation - Intel LGA 1150/1151/1155/1156/1200/1700

Step 1: Choose the right mounting holes according to the CPU socket and insert the female push pins.

Step 2: Apply the thermal paste on the CPU.

Step 3: Insert the female push pins, along with the bracket, on the motherboard holes. Insert the male push pins into the female push pins. Apply pressure until the mounting bracket is secured on the motherboard.

Step 4: Place the heatsink on the CPU. Hook one of the vertical clips, apply pressure, and hook the opposite vertical clip. Ensure proper contact between the heatsink base and the CPU surface during installation.

Step 5: Complete the installation by connecting the fan cable on the motherboard.

Installation - AMD FM2+/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2

Step 1: Apply thermal paste on the CPU.

Step 2: Place the heatsink on the processor and hook the vertical clips. Ensure proper contact between the heatsink base and the CPU surface during installation.

Step 3: Complete the installation by connecting the fan cable on the motherboard.

Second Fan Assembly (Fan not included)

Step 1: Place the mounting clip hooks on the fan.

Step 2: Align the mounting clip on the heatsink fins.

Step 3: Apply pressure in order to secure the clip on the heatsink.

General Recommendations

Before use:

• Remove cardboard protection pieces, protective film, and adhesive labels from accessories. Supervise children during this process to avoid any risk of suffocation.
• Check the appliance for any transport damage.

During use:

• To avoid any damage, do not place any weights on the appliance.
• Do not expose the appliance to atmospheric agents.

Cleaning

IMPORTANT:

• Do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. Do not clean or open the product while any power cables are attached.
• Clean the surfaces with a damp cloth. Finish off with a dry cloth.
• Do not use abrasive sponges or metallic scrapers or scourers, as these can ruin the surface over time.

Warranty Information

Who is covered by the warranty:

This warranty is valid only for the original purchaser.

What the warranty covers:

3 years from the date of purchase (starting January 2022 and depending on the laws of each country).

What the warranty does not cover:

• Any product whose serial number has been defaced, modified, or removed.
• Damage caused by accidents, misuse, negligence, fire, water, lightning, or other acts of nature, unauthorized modifications to the product, or failure to follow the instructions provided with the product.
• Repairs or attempts to repair by someone not authorized by NOX.
• Damage or loss of any software, data, or removable storage media.
• Loss of software or data during repair or replacement.
• Damage to the product caused during shipping.
• Disassembly or installation of the product.
• External causes such as power fluctuations or electrical failures.
• Use of supplies or parts not meeting NOX specifications.
• Normal wear and tear.
• Any other cause not related to a product defect.

If you have any questions about technical issues, please contact NOX Xtreme through their website: https://www.nox-xtreme.com/.

NOX reserves the right to make changes to the text and/or images.

Nox Xtreme is a registered trademark of Atlas Informática S.L. - B92492032 - Calle Punta Alta, 33, 29006 - Málaga - Spain. info@nox-xtreme.com

Declarations and Disposal

Declaration of Compliance with European Union Directives

NOX declares that this product complies with the essential requirements and other relevant provisions of the following Directive: 2014/30/EU, where applicable. The technical documentation required by the Conformity Assessment process is held by NOX and can be requested via info@nox-xtreme.com.

Disposal of Batteries and Electrical or Electronic Equipment Waste

The presence of this symbol [WEEE symbol] on the product, its batteries, or its packaging indicates that the product and contained batteries cannot be disposed of as household waste. It is the user's responsibility to deliver this product to a designated recycling collection point for batteries, electrical, or electronic equipment. Separate collection and recycling contribute to the preservation of natural resources and prevent potential negative consequences for human health and the environment resulting from improper disposal of hazardous substances contained in batteries and electrical or electronic equipment. For additional information about battery or electrical/electronic product recycling points, please contact your local municipal services.

CE