Aniioki Ebike Store: Affordable Long Range Electric Bikes for Adults – aniiokiebike
User Manual for ANIIOKI models including: 1000W 48V Lithium Battery 1000w Inverter Power Supply, 1000W, 48V Lithium Battery 1000w Inverter Power Supply, 1000w Inverter Power Supply, Inverter Power Supply, Power Supply
user manuals
File Info : application/pdf, 2 Pages, 11.58MB
DocumentDocumentINPUT 1 Solar 2 3 4 5 6 Type-c1 QC3.0 5V/2.4A Type-c2 USB 7 8 AC110V/60Hz 9 AC 22 19 48V Lithium Battery 1000W 20 AC-OUTPUT Inverter Power Supply Instruction www.aniioki.com I. Function Description: 10 11 1. Insert the DC adapter cable into the port of the 5. PD and USB Output: 12 8. Reading Light : lithium baery, and connect the XT90 plug to the DC Press and hold the USB key for 3 seconds, aer the Press and hold the LED-M key for 3 seconds, the 13 INPUT port of the inverter. display screen shows "USB QC3.0 TYEP. C", the port reading light will turn on as the first level brightness; short 14 15 2. Charging: outputs PD, QC3.0, USB 5V/2.4A. The 4 output ports support the fast charging separately press the key again, the reading light will turn to the second level brightness; short press the key again, the Connect the output plug of the Solar Panel (to be ordered and also can be uesd for 4 electronic devices reading light will turn to the third level brightness. separately) to the charging port , the display screen will simultaneously. lights up automacally during charging and the baery The seng of the three modes cycle in sequence, press indicator flickers, that indicate now is charging. 6. AC Output: and hold the key for 3 seconds to turn off. 3. Discharge: Press and hold the POWER key for 3 seconds, the display screen will show the baery level aer startup. The discharge me depends on the baery voltage ( for reference only, the specific me depends on the actual Press and hold the AC key for 3 seconds, the display screen shows "AC", indicates the output voltage and frequency, the AC output port (port & ) output the voltage, now plug in the electric appliance and turn it on. AC port x3 (port & ) connected in parallel, and the II. Display Screen Function Description: usage me). Press and hold the POWER key for 3 seconds to turn off the device. Other output funcons can only be used when turned on the device. 4. DC Output: Press and hold the DC key for 3 seconds, aer the total output power of the AC port x3 (port & ) cannot exceed 1000W. 7. The Flashlight : Press and hold the key for 3 seconds, the flashlight will turn on as the first level brightness; short press the key again, the flashlight will turn to the second level brightness; short press the key again, the flashlight will 1. indicates the charging and discharging me; indicates the AC inverter temperature, when the temperature exceeds 45 degrees, the fan 21 22 start to work and the symbol will light up. 2. When the DC discharge power exceeds 60W, the fan 21 22 start to work and the symbol will light up. display screen shows "DC", the DC output port output 12V voltage. enter to the SOS flashing mode. The seng of the three modes cycle in sequence, press and hold the key for 3 seconds to turn off. 3. The esmaon of charging and discharging me is calculated based on the default baery capacity of 30AH, and the baery % rao is the baery voltage measure. www.aniioki.com III. Precautions: . AC Malfunction Indication And Solution: . Specifications: 1. Solar charging: A. The device can match the foldable solar panel and the open single solar panel (the maximum power of the solar panel cannot exceed 300W, and the output voltage of the solar is 18V~36V). When charging, the maximum voltage of the baery is 54.6V, to avoid the danger, please do not connect with the lithium baery with voltages other than 48V or any lead-acid baery. B.The MTTP system tracks the maximum charging power automacally, please make sure the solar panel is placed in the sunny area (solar panels work best in direct sunlight). 2. Please check first when use, make sure the baery is firmly connected to this device, and then turn on the device. 3. Aer turning on the AC output, connect the device first, and then turn on/off the power switch of the device. 4. Keep in a dry place when using and storing, avoid to be exposed to the rain and water. Beep Sound: Twice - The lithium baery is under voltage, please stop using and then charge the device. Beep Sound: Three mes -The lithium baery over voltage, please stop using and check if the baery matches. Beep Sound: Four mes - The device temperature is too high, please stop using and then cool down before using. Beep Sound: Five mes - Overload and short circuit, please replace the electric appliance and then start to use. Beep Sound: Six mes - Overload, please replace a low-power electric appliance and then start to use. 1. DC Input: Only applicable to 13 series of 48V ternary lithium baeries, requiring a connuous discharge current of 30A (same as the inside BMS). 2. Solar Charging: 18-36V/ 5-8A (the maximum power of the soloar panel cannot exceed 300W) 3. DC Output: DC: 12V/8A x 2 (Plug #5.5 x 2.0mm) Type-C1: PD100W Type-C2: PD20W USB 1: QC3.0 20W USB 2: 5.0V 2.4A 4. AC Output: AC110V 60Hz (pure sine wave) AC Output Power(AC x 3-port&): 1000W (Max) 5. Flashlight: Two brightness levels + SOS flashing 6. Reading Light: Three brightness levels 7. Working Temperature: -10 ~ 40 8. Product Size: 274 x 270 x 170mm 9. Product Net Weight: 2.5KG . Contact Information: Website: www.aniioki.com E-mail: sales@aniioki.com Phone: (909)296-9922