Kobalt Brushless Blower

Product Specifications

Package Contents

The package includes the following components:

• A: Variable-speed trigger switch
• B: Turbo button
• C: Trigger-lock lever
• D: Hang hole
• E: Blower tube
• F: Tube-release button

Diagram Description: The main unit is a handheld blower with a battery compartment. The blower tube attaches to the front. Key controls include a variable-speed trigger switch, a turbo button, and a trigger-lock lever. A hang hole is located on the rear housing.

⚠️ WARNING: Inspect the tool carefully for any damage that may have occurred during shipping. If parts are missing or damaged, return the product to the place of purchase. Do not discard packaging until all parts have been examined. Do not use the tool if any part is missing or damaged until it has been repaired or replaced, as this could result in serious injury.

Safety Information

Read and understand this entire manual before attempting to assemble or operate this product.

⚠️ WARNING: Operation of any power tool can throw foreign objects, causing severe eye damage. Always wear safety goggles or safety glasses with side shields and a full-face shield when needed. Eye protection should be marked to comply with ANSI Z87.1.

California Proposition 65 Warning: Dust from certain activities (sanding, sawing, grinding, drilling) contains chemicals known to cause cancer, birth defects, or reproductive harm. Reduce exposure by working in a well-ventilated area, using approved safety equipment (like dust masks), and washing exposed skin.

? DANGER: Individuals with electronic devices like pacemakers should consult their physician before using this product, as electrical equipment in close proximity can interfere with or cause pacemaker failure.

Know the Tool: Read this manual and all labels before operating. Keep the manual for future reference.

Important: This tool should only be serviced by a qualified service technician.

Symbols Used:

• V: Volts
• CFM: Cubic Feet Per Minute
• km/h: Kilometers per hour
• Direct current: Symbol for DC power
• MPH: Miles Per Hour
• ⚠️ / ! : Danger, warning, or caution. Indicates your safety is involved.
• [Eye Protection Symbol]: Always wear safety goggles or safety glasses with side shields and a full face shield when operating.
• [Instruction Manual Symbol]: To reduce the risk of injury, user must read instruction manual.

General Precautions:

• Follow basic precautions for electrical appliances.
• READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
• To reduce risk of fire, electric shock, or injury: Know your blower, its applications, limitations, and hazards.
• Do not use in rain. Household use only.
• Do not allow the blower to be used as a toy. Supervise children closely.
• Use only as described and with manufacturer-recommended attachments.
• Do not handle the charger or terminals with wet hands.
• Do not insert objects into openings. Keep openings clear of dust, lint, hair, etc.
• Keep hair, loose clothing, fingers, and body parts away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not charge the battery pack outdoors.
• Use only the manufacturer-supplied charger.
• Do not incinerate the appliance, even if severely damaged, as batteries can explode.
• Prevent unintentional starting: Ensure the switch is in the "OFF" position before connecting the battery pack, picking up, or carrying the appliance.

• Disconnect the battery pack before making adjustments, changing accessories, or storing the appliance.
• Use only the specifically designated battery pack; others may cause fire risk.
• Compatible Battery Packs: KB 240-03; KB 440-03; KB 640-03. Compatible Charger: KRC 840-03.
• Do not use damaged or modified battery packs or appliances.
• Do not expose to fire or excessive temperature (above 266°F/130°C).
• Follow charging instructions and charge within the specified temperature range.
• Have servicing performed by a qualified repair person using identical replacement parts.
• Do not modify or attempt to repair the appliance or battery pack except as instructed.
• Do not operate in explosive atmospheres (flammable liquids, gases, dust).
• Stay alert, use common sense. Do not use when tired, upset, or under the influence of drugs, alcohol, or medication.
• Do not use on unstable supports (ladder, rooftop, tree). Maintain stable footing.
• Do not overreach.
• Be aware of children and pets when removing the battery pack. Never remove at a high position.
• Do not use if the switch is faulty.
• Check for misalignment, binding, or breakage. Have damaged blowers serviced.
• Keep the blower dry, clean, and free from oil/grease. Use a clean cloth. Do not use harsh solvents.
• Always wear eye protection (ANSI Z87.1) and hearing protection.
• Protect your lungs: Wear a face or dust mask if dusty.
• Protect your hearing: Wear hearing protection for extended operation.
• Wear appropriate clothing: long pants, long sleeves, boots, gloves. Avoid loose garments or jewelry.
• Do not operate barefoot or with sandals. Wear protective footwear.
• Check work area: Remove objects that could be thrown or entangled.
• Do not point the blower tube at people or pets.
• Never run the unit without the blower tube installed.
• Store indoors in a dry, secure place, out of reach of children.
• Keep bystanders, children, and pets at least 50 ft (15m) away.
• Do not use near fires or hot ashes.
• Do not use to spread chemicals, fertilizers, or toxic substances.
• Never place the blower on an unstable surface when running.
• Save these instructions for future reference and to instruct others.

Preparation

Know Your Blower

This blower is designed for clearing hard surfaces like driveways and walkways, and keeping decks and driveways free of leaves and pine needles.

Before use, familiarize yourself with all operating features and safety requirements.

⚠️ WARNING: Do not let familiarity cause carelessness. A moment of descuido can cause severe injury. Always familiarize yourself with operating features and safety instructions before use.

⚠️ WARNING: Do not modify the tool or create unrecommended accessories. Misuse can lead to hazardous conditions and serious injury.

Assembly Instructions

1. Assembling the Blower Tube

This product requires assembly before use.

⚠️ WARNING: To prevent accidental starting and serious injury, always remove the battery pack from the tool when assembling parts.

1. Align the groove in the blower tube (E) with the knob on the blower housing. Push the tube onto the housing until it snaps into place. Pull the tube to ensure it is securely attached.
2. To remove the tube, press and hold the tube-release button (F), then pull the tube straight from the blower.

2. To Install/Remove Battery Pack

To Attach Battery Pack:

Ensure the variable-speed trigger switch (A) and trigger-lock lever (C) are in the OFF position.

1. Align the mounting grooves on the battery pack with the raised ribs in the blower's battery port.
2. Slide the battery pack into the blower until it snaps into position.

NOTICE: Ensure the latch snaps into place and the battery pack is secured before operation. Improper assembly can damage internal components.

To Detach Battery Pack:

⚠️ WARNING: Be aware of your feet, children, or pets when pressing the battery-release button. Serious injury could result if the battery pack falls. Never remove the battery pack at a high position.

Ensure the variable-speed trigger switch (A) and trigger-lock lever (C) are in the OFF position.

1. Hold the battery pack in your palm.
2. Press the battery-release button with your thumb to disengage the latch.
3. Grasp and remove the battery pack from the blower.

Operating Instructions

3. To Start/Stop the Blower

The variable-speed trigger switch (A) turns the blower ON/OFF and controls speed. The trigger-lock lever (C) locks the blower at a certain speed.

• To turn ON: Depress the variable-speed trigger switch (A).
• To turn OFF: Release the variable-speed trigger switch.
• Speed control: Higher trigger pressure provides higher speed; lower pressure provides lower speed.

To Turn the Blower ON:

Depress the variable speed trigger switch (A). The trigger switch controls speed based on pressure. Move the trigger-lock lever (C) towards the back of the tool to keep the blower running at a set speed. The lever can also be pulled back to start the blower without initially pressing the trigger; higher speeds are achieved as the lever is moved further back.

To Turn the Blower OFF:

• If the trigger-lock lever (C) is not engaged, release the variable-speed trigger switch (A).
• If the trigger-lock lever is engaged, move it forward to the unlocked position.

Turbo Mode

Press the turbo button (B) to temporarily increase air speed to the maximum level. The blower will resume its previous speed when the button is released.

4. Hanging Hole

The blower is equipped with a hanging hole (D) for storage on a screw or nail. Ensure the screw is strong enough to support the weight of the blower and battery.

Operating the Blower

⚠️ WARNING: Always wear eye protection (ANSI Z87.1) and hearing protection. Failure to do so could result in serious injury.

⚠️ WARNING: Do not use unrecommended attachments or accessories, as this can cause serious personal injury.

Before each use, inspect the product for damaged, missing, or loose parts. Tighten all fasteners and caps. Do not operate until missing or damaged parts are replaced.

• To prevent scattering debris, blow around the edges of a pile, not directly into the center.
• To reduce noise, limit the number of equipment pieces used.
• Use rakes and brooms to loosen debris before blowing. Dampen dusty surfaces if water is available.
• Watch for children, pets, open windows, or freshly washed cars. Blow debris safely away.
• Clean up after use and dispose of debris properly.

Care and Maintenance

⚠️ NOTE: All maintenance should be carried out by a qualified service technician.

Before cleaning or performing maintenance, remove the battery. Keep the tool and ventilation slots clean for safe and proper operation.

Cleaning

Use only a soft, dry cloth to clean the blower. Never use detergent or alcohol.

Storage

Clean all foreign material from the air inlets. Store indoors in a dry, secure place inaccessible to children. Keep away from corrosive agents like garden chemicals and de-icing salts.

Troubleshooting

⚠️ WARNING: Turn the switch to "OFF" and remove the battery before troubleshooting.

Warranty

This product is warranted for 5 years from the date of purchase against defects in material and workmanship for the original purchaser. This warranty does not cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts. The warranty is limited to 90 days for commercial and rental use.

If the product meets the warranty criteria, return it to the place of purchase with proof of purchase for repair or replacement at no charge. This warranty grants specific legal rights, and you may have other rights that vary by state.

Manufacturer: Lowe's Home Centers LLC. Mooresville, NC 28117

Printed in China