Dolphin SP-807RBT Portable Speaker

Introduction

Congratulations on your purchase of the Dolphin SP-807RBT portable speaker. Please read this manual thoroughly before using the product to benefit fully from all its features.

Follow the instructions to ensure proper operation and to avoid invalidating the warranty. Take all precautions to prevent fire and/or electrical shock. Repairs must only be carried out by qualified technicians.

Safety First:

• Keep the manual for future reference.
• Ask for professional advice before using the product. A slight smell may occur upon first use, which is normal and will disappear.
• Do not open the housing as it contains voltage-carrying parts.
• Do not place metal objects or pour liquids into the product to avoid electrical shock and malfunction.
• Keep the product away from heat sources, vibrating surfaces, and do not cover ventilation holes.
• The product is not suitable for continuous use.
• Handle the mains lead with care; a damaged lead can cause electrical shock.
• Always pull the plug, never the lead, when unplugging.
• Do not plug or unplug with wet hands.
• If the plug or mains lead is damaged, it must be replaced by a qualified technician.
• If the product is damaged and internal parts are visible, do NOT plug it in or switch it on. Contact your dealer.
• Do not connect to a rheostat or dimmer.
• Protect the product from rain and moisture to avoid fire and shock hazards.
• All repairs must be carried out by qualified technicians.
• Connect to an earthed mains outlet protected by a 10-16A fuse.
• Unplug the product during thunderstorms or when not in use for extended periods.
• If the unit has been unused for a long time, condensation may occur. Allow it to reach room temperature before switching on. Never use in humid rooms or outdoors.
• Follow applicable guidelines and instructions to prevent accidents.
• Avoid repeatedly switching the product on and off.
• Keep out of reach of children and do not leave unattended.
• Do not use cleaning sprays on switches; use a dry cloth for cleaning.
• Do not force controls.
• If the product has fallen, have it checked by a qualified technician before use.
• Keep away from electronic equipment that may cause interference.
• Recharge the built-in battery every 3 months if not in use to prevent permanent damage.
• Use only original spare parts for repairs.
• Switch off and unplug before moving the product. Check the mains lead for damage before each use.
• Ensure the mains voltage (100-240V 50/60Hz) matches your power outlet.
• Keep original packing material for safe transport.
• ⚠️ High Voltage Warning: This mark indicates high voltages inside the housing that can cause a shock hazard.
• ⚠️ Manual Warning: This mark indicates important instructions in the manual that must be read and followed.
• Operating Temperature: The product functions normally between 5°C/41°F and 35°C/95°F.
• Disposal: Do not dispose of electronic products with household waste. Recycle them at a designated center.
• Warranty: Do not attempt self-repairs or modifications, as this voids the warranty. Dolphin is not responsible for personal injury or damages due to improper use or failure to follow instructions.

Overview

Visual Description: A black portable speaker with a large blue illuminated ring on the front grille. The Dolphin logo is visible on the front.

1. Main Channel Controls

The main channel can play music from an Auxiliary source, Bluetooth, USB/SD Card, or FM Radio.

• MODE: Switches between input modes.
• WaveSync™: Use instructions on the following page to pair two speakers wirelessly for double the power.
• REPE: Repeats the current track in MP3 mode (USB/SD card).
• PLAY/PAUSE: Play or pause music from Bluetooth, USB, or SD. In radio mode, hold for three seconds to scan for stations.
• PREV/NEXT: Switch through songs (Bluetooth/USB/SD) or channels (FM Radio).

2. Main Channel Inputs

• SD/USB: Insert a USB or SD card to play MP3 files.
• AUX: Connect a 3.5mm audio cable to an auxiliary device.

3. Main Channel Sound Controls

• VOLUME: Controls the main channel volume.
• BASS: Controls low frequencies.
• TREBLE: Controls high frequencies.

4. Channel 2

• MIC IN: Connect a microphone or other source using a 1/4" audio cable.
• MIC VOL: Controls microphone volume.
• ECHO: Hold forward/back buttons to adjust echo effect for the microphone.

5. Power Switch

Use this switch to turn the unit on and off.

6. LED Light Switch

Use this switch to turn the Sound Activated Multicolor LED lights on and off.

Bluetooth Connection

Connect your Bluetooth device:

• Press the MODE button until Bluetooth mode is active.
• On your phone, enable Bluetooth and search for "SP-807RBT".
• Once connected, the LCD display confirms. If a PIN is required, enter "0000".

The wireless range for Bluetooth is approximately 33ft (~10m). Exceeding this range may cause stability issues.

WaveSync™

To connect two speakers for amplified sound:

• Ensure you have two matching speakers (same model number).
• Turn on both speakers and set them to Bluetooth mode.
• Pair one speaker with your Bluetooth device as described above.
• Press the WaveSync™ button on the paired speaker. A beep confirms the connection.
• Music played via Bluetooth will now play on both speakers. This function only works with Bluetooth audio.
• To disconnect, press the WaveSync™ button on either speaker.

Note: WaveSync compatibility may vary with different software versions or models. Consult your dealer for compatibility information.

USB/SD MP3 Function

Play MP3 files from a USB or SD card:

• Place MP3 song files in the root folder of a USB or SD card.
• Insert the card into the appropriate port; playback will begin automatically.
• Use the minus and plus buttons to skip tracks.

FM Radio

Listen to nearby radio stations:

• Press the MODE button until radio mode is active.
• Hold the PLAY button to scan for radio stations.
• Use the forward and back buttons (PREV/NEXT) to switch between stations.

Aux Mode

Play music from an auxiliary device:

• Connect a 3.5mm AUX cable or RCA cable from your audio device to the speaker's AUX port.
• Press the MODE button to enter AUX mode.
• Volume can be controlled on both the audio device and the speaker.

Accessories

Included in the box:

• Microphone
• Power adapter
• Remote control
• User manual

If any items are missing, please contact your dealer.

Battery and Charging Instructions

• To charge, connect the speaker to a wall outlet using the power adapter.
• Fully charge the battery before first use to maximize its lifespan.
• The unit takes approximately 6 hours to fully charge. Charging begins automatically when the cable is connected.
• To maximize battery lifespan, recharge at least once every 3 months.
• Use the power switch to turn off the unit when not in use.

LED Lights

Use the LED Light Switch to turn the LED lights on or off. The lights are sound-activated, responding to music for a unique light show. Turn off the lights when not in use for extended periods.

Customer Feedback & Contact

Happy with your product? Consider connecting on social media or leaving a positive rating online.

Something Wrong? If you are unhappy, please contact us via our toll-free number to resolve any issues.

Follow Us:

Social Media: @dolphinaudio

Links: ▶️ [YouTube] ? [Facebook] ? [Instagram] ? [Twitter]

Contact Information:

Phone: 1.888.550.3938 (Toll-Free)

International Phone: 1.951.800.0078

Email: support@dolphinaudio.com

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Certifications: (FCC) (CE)

Manufacturing: MADE IN CHINA