ZURN Z5645-BWL HET Elongated, ADA Height, Floor Mounted Back Outlet EcoVantage® Flush Valve Toilet with ZurnSHIELD™ Glaze
Model: Z5645-BWL
Brand: ZURN
TAG
Architectural/Engineering Specification
Vitreous china, 1.1 gpf [4.16 Lpf] or greater, high efficiency, floor mounted back outlet toilet with siphon jet flushing action, ZurnSHIELD™ ceramic glaze, elongated front rim, ADA compliant rim height, 1-1/2" top spud inlet connection and 4-1/8" back outlet rough-in height. This bowl is designed to perform to industry standards with as little as 1.1 gallons per flush, engineered to provide optimal performance.
Product Features
- Zurn High Efficiency Toilets and paired performance flush valve systems are designed to exceed industry standards while using as little as 1.1 gallons of water per flush.
- Universal high efficiency toilet can be specified with 1.28 gpf [4.8 lpf], 1.6 gpf [6.0 lpf] or dual flush valves.
- Vitreous china
- ZurnSHIELD™ ceramic glaze creates a permanent surface that protects the fixture by inhibiting the growth of stain and odor causing mold mildew and bacteria, thus reducing the amount of time, chemicals and water to clean the bowl.
- 4-1/8" Back Outlet Rough-in
- Elongated front rim
- ADA Compliant rim height
- 2-1/8" fully glazed trapway
- High efficiency siphon jet flush action
- Includes bolt caps
- Shipping Weight: 65 lbs.
Compliance and Certification
- Complies with ASME A119.2 / CSA B45.1
- ADA Compliant
Variation Options
- Z5645-BWL: Z5645 Series top spud toilet
- Z5646-BWL: Z5646 Series top spud toilet with integral bedpan lugs
Recommended Trim
Z5955SS-EL: Elongated, standard white, open front toilet seat less cover with stainless steel check hinge.
Note
To ensure system performance: Minimum Running Water Pressure = 25 psi.
Rough-in and Overview Dimensions
The following dimensions are provided for installation planning:
- Overall Length (approx.): 27 3/8 inches [695 mm]
- Overall Width (approx.): 18 1/16 inches [468 mm]
- Overall Height (approx.): 16 5/8 inches [422 mm]
- ADA Compliant Rim Height (from floor to top of bowl): 11 1/4 inches [292 mm]
- Back Outlet Rough-in (from finished wall): 4 1/8 inches [105 mm]
- Centerline of Outlet to Finished Wall: 4 1/8 inches [105 mm]
- Centerline of Outlet to Side: 1 1/16 inches [27 mm]
- Bowl Width (approx.): 5 1/4 inches [140 mm]
- Bowl Center to Wall (approx.): 3 3/8 inches [86 mm]
- Vacuum Breaker Tube Connection Height (from outlet): 12 inches [38 mm]
- Top Spud Inlet Connection: 1 1/2 inches
- Trapway Diameter: 2 1/8 inches (fully glazed)
Note: Dimensions are approximate and may include variations. Refer to the diagram for detailed measurements.
