Product Overview
This document provides operating instructions for the EKVIP Inflatable Santa, model number 021644. It is designed for indoor and outdoor use and is a festive addition to holiday decorations.
The inflatable Santa is powered by an electric fan and requires a transformer (included) for operation. Please read all instructions carefully before use and save them for future reference.
Image Description: A large, festive inflatable Santa Claus figure, typically depicted wearing a red suit, hat, and white beard, designed to be inflated by a fan.
Safety Instructions ⚠️
- Do not connect the product to the mains power supply while it is still in its packaging.
- Designed for indoor and outdoor use.
- Check that no light sources are damaged before use.
- Do not connect two or more string lights together.
- No part of this product can be replaced or repaired. If any part is damaged, the entire product must be discarded.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the product.
- This product is not a toy. Do not allow children to play with the product.
- Exercise care if the product is used near children.
- Unplug the transformer from the mains power supply when the product is not in use.
- This product must be used with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The product may only be used if all seals are fitted correctly.
Technical Data
| Parameter | Specification |
|---|---|
| Input voltage, transformer | 230 V ~ 50 Hz |
| Output voltage, transformer | 12 V DC |
| Power | 12 W |
| Protection rating | IP44 |
| Ambient temperature | -10 – 70 °C |
Usage Instructions
- Remove the Santa from the packaging.
- Spread out the Santa in the intended location.
- Make sure that the zip at the bottom is closed.
- Connect the fan to the transformer.
- Plug the plug into the mains power supply. The fan starts automatically.
- Lift up the Santa slightly so it will inflate quicker.
- Check that the Santa stands steady when inflated.
- Secure two lines in the eyes on the sides of the Santa.
- Attach the lines to the anchoring pins.
- Secure anchoring pins in the ground.
- When the product needs to be deflated, it must be disconnected from the mains power supply. Opening the zip at the bottom accelerates deflation.
NOTE: A pair of weights can be placed at the bottom of the Santa to ensure it stands much steadier.
Symbols & Certifications
- ? [Read Instructions]
- ? [Class II Protection]
- ✅ [CE Certified]
- ♻️ [Recycle Product]
