ROG STRIX SCOPE NX WIRELESS DELUXE

Keyboard Features

Top View (US Layout)

Top view of the keyboard showing a standard US layout. Key areas include the alphanumeric keys, function row (F1-F12), navigation keys, and numpad. Indicator lights are located above the numpad.

Rear View

• [Kickstand] for angle adjustment
• [Power switch] to turn the device on/off
• [USB Type-C port] for wired connection and charging
• [Magnetic dongle storage] for the USB receiver

Indicator lights above the numpad:

• [Num Lock indicator]
• [Caps Lock indicator]
• [Scroll Lock indicator]
• [Function Lock indicator]
• [Win Lock indicator]
• [RGB indicator]

Package Contents

• Gaming Keyboard
• USB Type-C™ to Type-A Cable
• USB Dongle
• Wireless Dongle Extender
• Warranty Card
• Quick Start Guide

Note: The illustration is for reference only. Actual product specifications may vary with models, such as keyboard layout.

Recommendation: We recommend using the wireless dongle extender when using the keyboard in 2.4GHz mode.

Note: Only use the wireless dongle extender for the wireless dongle.

Connecting Your Gaming Keyboard

Using the Bundled Cable

Connect the bundled USB Type-C™ to Type-A cable to your gaming keyboard and a USB port on your computer.

Using RF Wireless Mode

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Pairing Bluetooth Mode (First Time)

Set the connection switch to the Bluetooth mode.

Pairing Bluetooth Mode to Additional Host Devices (max. 3)

1. Set the connection switch to the Bluetooth mode.
2. Press and hold the FN + 7 for 3 seconds until the RGB indicator on your gaming keyboard starts to blink blue. Once successfully paired, the RGB indicator will light up blue for 3 seconds.

Updating the Firmware and Customization

1. Download and install the Armoury Crate software from https://rog.asus.com.
2. Follow the software instructions to update your gaming keyboard firmware.
3. Customize your gaming keyboard using Armoury Crate.

Battery Status

When battery power is below 20% in wireless mode, the RGB indicator on your gaming keyboard will turn red (blinking) and the LEDs for all other keys will switch off.

You may charge your gaming keyboard by using the bundled USB cable.

Note: When charging the wireless gaming keyboard, the power output may vary according to the USB port you connect your gaming keyboard to.

Key Combinations

Note: When running AURA SYNC, the hot key related to lighting effects will be disabled (e.g., Profile switch, Lighting effects switch, Brightness level).

Switching Between Different Paired Host Devices

• Press Fn + 8/9/0 to switch to BLE paired device 1/2/3 respectively.

Note: The key that remains lit up in white can be turned off in Armoury Crate.

Safety Guidelines

• Keep the device away from liquid, humidity, or moisture.
• Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
• When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices

Limitation of Liability

ASUS is liable for damages up to the contract price of each product for bodily injury, damage to property, or other actual damages resulting from ASUS's omission or failure. ASUS is not liable for third-party claims, loss of records/data, or special, incidental, or indirect damages, including lost profits, even if informed of their possibility.

RF Exposure Warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, the user is encouraged to try correcting it by reorienting/relocating the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician. CAUTION: Shielded cables are required for monitor connection to the graphics card to assure FCC compliance. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Innovation, Science and Economic Development Canada (ISED) Statement

This device complies with ISED licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B).

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the ISED radio frequency exposure limits. The Wireless Device should be used to minimize the potential for human contact during normal operation. This device has been evaluated for and shown compliant with the ISED Specific Absorption Rate (SAR) limits when operated in portable exposure conditions.

REACH

Complying with the REACH regulatory framework, chemical substances in ASUS products are published at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services

Information on responsible recycling of products, batteries, and packaging materials is available at http://csr.asus.com/english/Takeback.htm.

Proper Disposal

Do not throw the device in municipal waste. The symbol of the crossed-out wheeled bin indicates that the product should not be placed in municipal waste. Check local regulations for disposal of electronic products. Do not throw the device in fire. Do not short circuit the contacts. Do not disassemble the device.

Compliance and Certifications

UKCA RF Output Table (The Radio Equipment Regulations 2017)

CE RED RF Output Table (Directive 2014/53/EU)

Regional Notices

• Singapore: Complies with IMDA Standards DB103778.
• France: This device is recyclable. Dispose of at collection points (stores or recycling centers). Find collection points at www.quefairedemesdechets.fr. Prioritize repair or donation.

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. declares this device complies with essential requirements and other relevant provisions of The Radio Equipment Regulations 2017. Full text available at https://www.asus.com/support/.

CE Mark Warning

ASUSTeK Computer Inc. declares this device complies with essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Service and Support

Visit our multi-language website at https://www.asus.com/support/.

Manufacturer Information

Manufacturer Address: ASUSTek COMPUTER INC., 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112

Authorized Representative in Europe: ASUS COMPUTER GmbH, Harkortstrasse 21-23, 40880 Ratingen, Germany

Authorized Representative in United Kingdom: ASUSTEK (UK) LIMITED, 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England