Manuals+

E-Label User Information

FCC ID: SWX-U6P

IC ID: 6545A-U6P

Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling.

E-label and warning statements can be found in the device/controller GUI under Device > Settings > About.

Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generated, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user bill be required to correct the interference at his own expense.

ISED Canada

CAN ICES-3 (A) / NMB-3 (A)

This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

RF Exposure Warning

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.

Models: SWX-U6P, SWXU6P, 6545A-U6P, 6545A-U6P 300mbps BGN Access Point, 300mbps BGN Access Point, BGN Access Point, Access Point

File Info : application/pdf, 2 Pages, 69.88KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=6224218

References

Microsoft Word for Microsoft 365

Related Documents

Preview Ubiquiti UniFi U6+ Quick Installation Guide
Concise guide for installing and connecting the Ubiquiti UniFi U6+ wireless access point, including mounting and network setup instructions.
Preview Ubiquiti WAVEAP E-Label User Information and Compliance
Provides E-Label user information, FCC compliance statements, ISED Canada compliance, and RF exposure warnings for the Ubiquiti WAVEAP device.
Preview Ubiquiti U6IWR E-Label User Information and Compliance
FCC and ISED Canada compliance information for the Ubiquiti U6IWR device, including FCC ID SWX-U6IWR and IC ID 6545A-U6IWR. Details on e-labeling procedures, FCC rules, and RF exposure warnings.
Preview UniFi Protect Network Video Recorder Pro Safety & Regulatory Guide
Safety and regulatory information for the UniFi Protect Network Video Recorder Pro, including electrical safety, compliance statements for FCC and ISED Canada, and radiation exposure information.
Preview Ubiquiti Inc. FCC Attestation Statement for SWX-UX7
Official attestation statement from Ubiquiti Inc. confirming that the applicant, identified by FCC ID SWX-UX7, is not listed on the Covered List for covered equipment.
Preview Ubiquiti UDR7 UniFi Desk Gateway FCC Part 15 Subpart E Compliance Test Report
Official test report detailing the Ubiquiti UDR7 UniFi Desk Gateway's compliance with FCC Part 15, Subpart E regulations for Wi-Fi 7 wireless operations, including conducted and radiated emissions, power, and spectral density tests.
Preview Ubiquiti UX7 WiFi 7 Access Point FCC Test Report
This FCC test report details the certification of the Ubiquiti UX7 WiFi 7 access point, covering compliance with FCC Part 15, Subpart C regulations for wireless devices.
Preview Test Report Attachment: SWX-UDR7 Wireless Device
This document presents the test report attachment for the Ubiquiti SWX-UDR7 wireless device, detailing results for various RF performance tests including BLE band summary, RF output power, emission bandwidth, peak power spectral density, occupied channel bandwidth, band edge measurements, and spurious emissions.