Aonic 50 Gen 2 UC
Aonic 50 G2 UC quick start Version: 0.1 (2024-G)
Shure Incorporated
Table of Contents
AONIC 50 Gen 2 Aonic 50 Gen 2 UC
Getting Started
General Description Features
Wireless Headphones Headphone Button Controls Headphone LED Behavior Bluetooth® Pairing Cable connections Storage
USB-C Adapter Button Controls
USB-C Adapter LED Behavior
ShurePlus PLAY Mobile Listening App General Description AONIC 50 and PLAY App Sound Processing Environment Mode Active Noise Cancellation Spatializer USB Audio Mode Auto Power Off
Customizing the ANC switch
13
3
Create Custom Presets
16
3
Adjusting EQ
17
Care and Maintenance
18
3
Preset Modes
18
3
Update the Firmware for Shure AONIC Products
18
4
Accessories
19
4
Furnished Accessories
19
7
Replacement Parts
19
7
Specifications
19
8
Important Safety Instructions
20
8
Safety Information for Batteries
21
9
Important Safety Instructions for Listening and IEM Prod
ucts
22
9
Introduction to EMC
23
Regulatory Information for Class B EMC Products
24
10
Regulatory Information for Wireless Products
25
10 Regulatory Information for Wireless Products with Blue
10
tooth
27
10
Environmental Regulatory Information
28
11
Battery Regulatory Information
29
11
Regulatory Model Number (RMN)
29
11
Certifications
30
13
2/30
AONIC 50 Gen 2 Aonic 50 Gen 2 UC
Getting Started
1. Power on your device.
Shure Incorporated
2. Plug in USB-C bluetooth adapter to your PC.
Note: The USB-C Bluetooth adapter is pre-paired to your device.
General Description
Engineered from decades of stage and studio experience, the second generation of the AONIC 50 Wireless Noise Cancelling Headphones deliver premium, high-fidelity audio with improved active noise cancelling technology. New Spatialized Audio takes your listening experience outside of your headphones to a whole new level by replicating the experience of listening through highend speakers. A modern "allblack" design and up to 45 hours of battery life keep the music going in comfort and style, while customizable EQ and environment mode provide a personalized, unparalleled audio experience.
Features
· Premium, studioquality sound through customengineered 50mm dynamic drivers. Developed from decades of profes sional experience made for critical listeners.
· Spatialized Audio technology uses a proprietary algorithm to enhance the depth of your listening experience by widening the sound stage without introducing unnatural artifacts. Available in three unique modes Music, Cinema, or Podcast. Mu 3/30
Shure Incorporated
sic mode replicates listening through high-end speakers in a room and maintains the original integrity of the track. Cinema mode enhances low-frequency response and clarity of speech for a movie theater experience. Podcast mode brings the voice of your favorite speakers close to your ears. · New Hybrid Active Noise Cancelling (ANC) technology blocks out distractions for a truly immersive and natural listening experience improved over the prior generation. Using microphones inside and outside of the earcup, the second genera tion ANC allows you to control how much (or how little) of the outside world you hear. Featuring four selectable modes (Light, Moderate, Max and MaxAware), the new MaxAware setting allows you to block unwanted noise while still maintain ing awareness of your surroundings - great for conversations on-the-go. · Environment mode allows you to hear the outside world with the flip of a switch. Refine the ambience settings via an ad justable slider in the ShurePlusTM PLAY app. · Up to 45 hours battery life with quick charge capabilities, more than doubling runtime from the prior generation. Fifteen minutes of charge provides 5 hours of use. · Customizable EQ. Choose from multiple presets, or create your own using the free ShurePlusTM PLAY app. Saves directly to your headphones for a seamless audio experience across other apps and devices. · Long-wearing comfort and durability in a patented design built to last. Folds flat in a new zippered carrying case designed for portability. · Customizable fingertip controls provide quick access to answer calls, adjust volume, pause music or access default voice assistant with the push of a button. Assign your preferred features including Spatializer, EQ or ANC settings directly on the headphone for advanced control. · Premium communication with clear call quality through beamforming microphone technology and proprietary automatic gain control (AGC) settings. Utilizing 6 microphones, the precision-engineered system automatically adjusts settings to avoid surrounding noise, offering unmatched quality for video and phone calls. Hear and be heard clearly. · Bluetooth® 5 wireless technology with a class 1 transmitter delivers enhanced stability with a range of up to 100 meters (320 feet). Pairs to phones, tablets and laptops. · Premium headphone amplifier and support for multiple codecs including Qualcomm® aptXTM, aptXTM HD, aptXTM Adaptive, AAC, SBC and Sony LDAC. Featuring Snapdragon SoundTM technology. · High-Resolution USB Streaming up to 32-bit/384 kHz for an unmatched wired listening experience. Connect to wired sources with included 3.5mm analog audio cable or USB-C digital input for charging and High-Resolution streaming audio. · ShurePlusTM PLAY app allows you to customize your preferences and control parametric EQ, noise cancellation, Spatializ er and Environment Mode settings. Free to download for iOS and Android.
Wireless Headphones
Headphone Button Controls
4/30
Action Power on Power off
Enter pairing mode
Reset paired devices list
Answer calls Decline/end calls Mute/unmute mic
Power Button
Shure Incorporated
Control Press and hold, 2 seconds Press and hold, 4 seconds
1. Turn off the headphones 2. Press and hold, 5 seconds
1. Turn off the headphones and plug in to a charger 2. Press and hold, 7 seconds
Press once Press 3 times Press twice
Action Bring Teams to the front Raise/lower hand
Teams Button
Control Press once Press and hold, 3 seconds
5/30
Shure Incorporated
Action Volume up Volume down
Side Buttons
Control Press + Press -
Environment mode/ANC switch
Action
Control
Environment mode
Push switch up
No Environment mode or Active Noise Cancellation
Centered
Active Noise Cancellation
Push switch down
Note: You can customize the button controls in the ShurePlusTM PLAY app available for iOS and Android.
6/30
Shure Incorporated
Hardware reset
If the buttons do not respond to repeated presses, you can perform a hardware reset to force a power off. 1. Press the +, -, and power buttons simultaneously to immediately power off the headphones. This does not reset any values you may have changed. 2. Power on the headphones.
Headphone LED Behavior
The headphone's light is above the power button on the right earcup.
Flashing blue and red: Pairing Blue for 2 seconds: Bluetooth connected Flashing blue: Incoming call Flashing red: Low battery Red double flash: Mic muted Solid red: Charging* or in a call/meeting *LED turns off when the headphones are fully charged.
Bluetooth® Pairing
Headphones automatically enter pairing mode when you power them on the first time or when they have not been previously paired with this audio source.
1. From your audio source, select "ShureAONIC50" 2. When successfully paired, you hear "Connected" Headphones automatically pair with previously paired devices when you power them on. After a few seconds you will hear "Connected."
Manual pairing
1. Turn off the headphones 2. Press and hold the power button for 5 seconds 3. When you hear "Bluetooth pairing mode," release the button 4. From your audio source, select "ShureAONIC50"
7/30
Shure Incorporated
5. When successfully paired, you hear "Connected"
Note: If the pairing fails on the first attempt, repeat the process from the beginning.
To customize the listening features of your device, download the free ShurePlusTM PLAY app for iOS and Android.
Multipoint pairing
AONIC 50 headphones support Bluetooth multipoint pairing which enables the headphones to be connected to two devices at the same time. AONIC 50 will remain connected to both devices and receive inputs alternately. If you are having difficulty with your AONIC 50 headphones and multipoint pairing, follow these steps:
1. Clear the AONIC 50's paired devices list (PDL) from the PLAY app 2. Clear the AONIC 50 from any previously paired devices 3. Power off the AONIC 50 headphones 4. Press and hold the AONIC 50 power button for 5 seconds 5. When you hear "Bluetooth pairing mode," release the button 6. Select "Shure AONIC 50" on the first mobile device 7. When successfully paired, you hear "Connected" 8. Disable Bluetooth on that mobile device 9. Power off the AONIC 50 headphones 10. Press and hold the AONIC 50 power button for 5 seconds to enter Bluetooth pairing mode again 11. Connect to other device 12. Turn on Bluetooth on the first cellular phone and select "Shure AONIC 50" in settings You will not hear a "Connected" prompt but you will see that the headphones are connected to both of the devices. Use the ShurePlus PLAY app to select how you want the audio to work in multipoint pairing: · Static - Your current audio connection is unaffected if a second audio source begins to play. · Dynamic - Your audio connection switches to the most recently played audio source.
Cable connections
The headphones can also use two different cables to access audio instead of using the wireless feature: · USB-C: Charge the headphones Connect to digital audio · 3.5 mm audio cable: Connect to an analog audio port
Storage
Store headphones in protective case when not in use.
8/30
USB-C Adapter Button Controls
Shure Incorporated
USB-C Adapter Button Controls
Action Enter Bluetooth pairing Stop Bluetooth pairing Reset paired device list
Control Press and hold, 4 seconds Press once Press and hold, 7 seconds
USB-C Adapter LED Behavior
The light is on the top of the USB-C adapter.
Flashing red and blue: Bluetooth pairing Solid blue: Bluetooth connected Flashes white: Teams pairing
9/30
Solid white: Teams connected Slow blinking white: Teams meeting notifications Flashes blue: Incoming call Solid red: In a call or meeting Flashes red: Call muted
Shure Incorporated
ShurePlus PLAY Mobile Listening App
General Description
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire less and True Wireless products in the device tab.
Features
· Import and play multiple, high-resolution and standard file types · Customize presets with the parametric graphic EQ · Adjust your volume with the full-screen fader · Create playlists and organize your music library by playlist, artist, album title, song title, genre, or composer · Quickly dial in your sound with EQ preset modes for a variety of listening situations.
AONIC 50 and PLAY App Sound Processing
AONIC 50, Gen 2 headphones use all of your PLAY app DSP settings, regardless of how you are connected to the audio source and even after you have closed the app. The DSP occurs on the headphones and the app provides the access to cus tomize those hardware settings.
Environment Mode
Environment mode allows you to hear the ambient noise around you. This is especially useful when you want to listen to music or are on a phone call, yet you still want to be aware of the sounds around you.
To use environment mode, push the vertical switch on the back of the right earcup to the up position.
In the ShurePlus PLAY app, you can adjust the environment mode across eleven levels:
10/30
Shure Incorporated
Hear Myself on Calls
The Hear myself on calls setting allows you to hear your own voice on phone calls at a volume based on your Environment Mode setting. When switched off, the mics in the headphones still pick up your voice for phone calls, it's just that you are not able to hear yourself.
Active Noise Cancellation
Active Noise Cancellation (ANC) allows you to suppress some or all of the noise around you. This is especially useful when traveling where road noise in a car, bus, or train, or jet noise in an airplane can force you to increase the volume. To use ANC, push the vertical switch on the back of the right earcup to the down position. In the ShurePlus PLAY app, you can adjust the ANC between four levels of noise cancellation:
· Light · Moderate · Max · MaxAware
Spatializer
The Spatializer uses digital processing to make it sound like you're in a larger setting using a pair of loudspeakers. The Spatial izer options are:
· None - no change · Music - the audio sounds like you're in a recording studio · Cinema - the audio sounds like you're in a theater · Podcast - the audio sounds like you're in the room with the podcasters
USB Audio Mode
AONIC 50, Gen 2 headphones have two different USB modes, selectable in the PLAY app: · Communication - Standard, default mode, mic available Communication Mode supports playback up to 24-bit, 384kHz · Hi-Res Listening - Hi-Res audio, mic not available Hi-Res Listening supports playback in 16-, 24-, and 32-bit depths, and the sample rates: 48, 96, 192, and 384. The 44.1 sample rate (and multiples of that sample rate) are not supported.
11/30
Shure Incorporated
Hi-Res Listening
AONIC 50, Gen 2 headphones supports the Hi-Res streaming playback of the supported audio file formats (WAV, FLAC, and others) over USB for the ultimate audiophile listening experience. You access the feature through the PLAY app, USBAudio Mode.
You select HiResListening, switching it from the factory default mode of Communication.
Note: The following features are not supported when in USB Hi-Res Listening mode:
· Environment Mode/Active Noise Cancellation · Spatializer · Switch customization · Any EQ feature in the PLAY app Notice: iOS USB playback requires a Camera Connection kit.
Mic Selection with a Computer
When using AONIC 50, Gen 2 headphones with a computer connected through a USB cable, use Device Manager > Audio inputs and outputs to specify
· Headset to use the mics in the AONIC 50 · Headphones to use a third-party mic
USB Charging
The USB cable always recharges the battery in the headphones, regardless of USB mode. If you are using a mobile device with a USB cord and are worried about draining your battery, you can control charging in the PLAY app under WhentoCharge.
12/30
Shure Incorporated
Auto Power Off
You can configure the Auto Power Off feature in the PLAY app to turn off your headphones when not in use:
1. Select WhentoCharge 2. Specify the auto power off time in PowerOffWhenDisconnected
After 10 Minutes (default) After 1 Hour After 4 Hours Never
Customizing the ANC switch
Using the PLAY app, you can customize the ANC switch to provide an enhanced listening experience. Select CustomizeSlider:
The Default settings are:
· Top - Environment mode · Middle - None (bypass / passive isolation) · Bottom - Active Noise Cancellation
13/30
Shure Incorporated
The ANCModes are:
· Top - MaxAware (Active Noise Cancellation and Environment mode) · Middle - Light Active Noise Cancellation · Bottom - Maximum Active Noise Cancellation
The Spatializer settings are:
· Top - Music · Middle - Cinema · Bottom - Podcast
14/30
Shure Incorporated
There are default Equalizer settings when you first select the Equalizer option:
· Top - Loudness · Middle - Bass Boost · Bottom - Vocal Boost
You can change the default settings to any of the equalizer options 1. Select the slider position you want to change
15/30
Shure Incorporated
2. Choose from the equalizer preset settings: Bass Boost Bass Cut Treble Boost Treble Cut Vocal Boost De-ess Loudness any custom presets you've created
Create Custom Presets
Add new preset
1. Scroll down to tap AddNewPreset or tap Manual. New presets start out flat. 2. Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer.
Tap the values to type in a specific number. Tap the - or + to adjust in larger increments. Tap and drag the numbered circles for bigger changes. 3. Tap Save to name and save your new custom preset. Custom presets will show up after the list of Shure presets.
16/30
Shure Incorporated
Duplicate a Preset
You can duplicate both Shure and custom presets. Duplicating a preset is convenient if you like the way a preset sounds but you want to make and keep adjustments to the sound.
1. Start by selecting an already existing preset. 2. Tap the MoreOptions 3 dots and select Duplicate. 3. Scroll down to find your duplicate preset in the list of custom presets. 4. Tap the MoreOptions 3 dots and select Edit. 5. Adjust your frequency, gain, and bandwidth parameters. Type in a specific number. Tap - or + to adjust in small incre
ments. Or manually tap and drag the numbered circles for larger changes. 6. Tap Save to save your new custom preset.
Adjusting EQ
Select and adjust frequency, gain, and bandwidth in the equalizer.
Equalization Explained
The 4-band parametric equalizer is used to adjust the volume of independent, adjustable frequency ranges, to precisely shape the frequency response. The equalizer can be bypassed for a flat frequency response.
Frequency
Select the center frequency of the filter to cut/boost.
Gain
Adjusts the level for a specific filter.
Bandwidth or Q
Adjusts the range of frequencies affected by the filter. The value is represented in octaves.
Commonly used EQ Adjustments
Treble boost for improved speech intelligibility: Add a high shelf filter to boost frequencies greater than 1 kHz by 3-6 dB Ambient HVAC noise reduction: Add a low cut filter to attenuate frequencies below 200 Hz Reduce flutter echoes and sibilance: Identify the specific frequency range that "excites" the sound:
1. Set a narrow Q value
17/30
Shure Incorporated
2. Increase the gain to between +10 and +15 dB, and then experiment with frequencies between 1 kHz and 6 kHz to pin point the range of flutter echoes or sibilance
3. Reduce the gain at the identified frequency (start between -3 and -6 dB) to minimize the unwanted sound
Reduce hollow, resonant sound: Identify the specific frequency range that "excites" the sound and lower it:
1. Set a narrow Q value 2. Increase the gain to between +10 and +15 dB, and then experiment with frequencies between 300 Hz and 900 Hz to
pinpoint the resonant frequency 3. Reduce the gain at the identified frequency (start between -3 and -6 dB) to minimize the unwanted sound
Care and Maintenance
To clean the headphones, use a soft, damp cloth.
CAUTION: Do not use cleansers that contain solvents. Keep liquid and foreign objects out of the driver openings.
Preset Modes
Use presets to quickly access commonly used listening scenarios. Seven selectable 4-band presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best, and then adjust levels as needed.
Preset
Application
Bass Boost
Increase low frequencies
Bass Cut
Decrease low frequencies
Treble Boost
Increase high frequencies
Treble Cut
Decrease high frequencies
Vocal Boost
Increase vocal clarity by emphasizing the vocal range
De-ess
Decrease vocal hiss/ sibilance in speech
Loudness
Clarity for listening at low volume. Both the bass and treble frequencies are boosted to make the overall sound feel louder.
Update the Firmware for Shure AONIC Products
To take advantage of additional features and design enhancements, connect your AONIC product to a mobile device running the ShurePlus PLAY app, available for Android and iOS.
1. Turn on Bluetooth and pair the AONIC product to your mobile device. 2. Open theShurePlus PLAY app . 3. Updates appear on the home screen or the settings screen. Tap to update.
· To update, you need a minimum battery charge of 50% on the AONIC product and your mobile device. · Firmware downloads can take up to 30 minutes. 4. Wait until the "Update Completed" confirmation screen appears. Do not power off the AONIC product until the update completes. Do not put earphone adapters back into their case. It will cancel the update.
18/30
Shure Incorporated
Tips for a reliable update:
· Make sure that the mobile device and your AONIC product are powered on and near one another. · Enable Do Not Disturb to avoid interruptions while downloading the update. · Stay inside of the PLAY app and ensure that your screen is on. · Do not use the AONIC product or mobile device while the firmware is downloading. This slows or cancels the firmware up
date. · Do not update in areas with high volume mobile or WiFi wireless activity, like a plane or train station. This interference can
slow or cancel the update. · If the update fails, quit the app completely. You may need to force quit the app so that it isn't running in the background.
Wait 5 minutes before opening the app and attempting again. · If you are updating earphones and both adapters do not automatically connect, tap the music tab and then tap back into
the device tab.
Contact Shure Service and Repair if you experience any issues.
Accessories
Furnished Accessories
REPL SBH2350 CASE ONLY REPL USB-C to USB-A CABLE 1M REPL 2.5-3.5MM CABLE 1.5M
Replacement Parts
SBH2350 REPLACEMENT EARPADS (BLACK) SBH2350 REPLACEMENT EARPADS (DARK BROWN) SBH2350 REPLACEMENT EARPADS (WHITE)
Specifications
Model/Model:
MH36458
Transducer Type
Dynamic, Neodymium magnet
Driver Size
50 mm
Frequency Response
20 to 22,000 Hz
Sensitivity
@ 1 kHz
RPH-SBH2350-CASE RPH-CABLE-USB RPH-CABLE-AUDIO SBH2350-BK-PADS SBH2350-BR-PADS SBH2350-WH-PADS
19/30
Shure Incorporated
97.5 dB/mW
Impedance
@ 1 kHz
39
Maximum Input Power
100 mW
Battery Life
up to 45 hours
Weight
334 g (11.8oz.)
Operating Temperature
0°C to 45°C (32°F to 113°F)
Storage Temperature
-10°C to 30°C (14°F to 86°F)
Antenna Type
Internal Monopole
Gain
+2.60 dBi
Operating Frequency
2402 MHz2480 MHz
Modulation Type
FHSS
RF Output Power
+13.92 dBm ( EIRP)
Supported Codecs
aptX, aptX HD, aptX Adaptive, aptX Voice, SBC, AAC, LDAC
Important Safety Instructions
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance
with the manufacturer's instructions.
20/30
Shure Incorporated
8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (in cluding amplifiers) that produce heat. Do not place any open flame sources on the product.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace ment of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connec tion. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. 22. Follow local regulations and consult qualified personnel if the product installation or relocation requires construction work. Choose mounting hardware and an installation location that can support the weight of the product. Avoid loca tions subject to constant vibration. Use the required tools to install the product properly. Inspect the product periodically.
WARNING:
· Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting.
· If water or other foreign objects enter the inside of the device, fire or electric shock may result.
Safety Information for Batteries
1. Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
2. Follow instructions from manufacturer 3. Only use Shure charger to recharge Shure rechargeable batteries
WARNING:
Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.
21/30
Shure Incorporated
Do not dispose of the battery along with household waste. Check with local vendor for proper disposal of used battery packs.
4. Never put batteries in mouth. If swallowed, contact your physician or local poison control center 5. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and seek medical advice. 6. Do not short circuit; may cause burns or catch fire 7. Do not charge or use battery packs other than Shure rechargeable batteries 8. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like 9. Do not immerse the battery in liquid such as water, beverages, or other fluids. 10. Do not attach or insert battery with polarity reversed. 11. Keep away from small children. 12. Do not use abnormal batteries. 13. Pack the battery securely for transport.
Note: Use only with the included power supply, batteries, or a Shure-approved equivalent.
Storing Batteries
If batteries are to be stored for more than eight days, they should be placed into a temperature controlled storage area. Rec ommended battery storage temperature is 10 to 25°C (50 to 77°F). Additional battery storage information is available at shure.com/battery-storage.
Important Safety Instructions for Listening and IEM Products
1. If water or other foreign objects enter the inside of the device, fire or electric shock may result. 2. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 3. Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walk
ing, or jogging where traffic is present and accidents could occur. 4. Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or
serious injury. Contains small parts and cords that may pose risk of choking or strangulation. 5. Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease
the risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve. 6. Stop using the earphones/headphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
· Never disassemble or modify the device, as failures may result. · Do not subject to extreme force and do not pull on the cable or failures may result. · Keep the earphone dry and avoid exposure to extreme temperatures and humidity. · If you are currently receiving ear treatment, consult your physician before using this device.
WARNING:
22/30
Use, clean, and maintain earphones according to manufacturer's instructions
Shure Incorporated
High sound pressure Hearing damage risk To prevent possible hearing damage, do not listen at high volume levels for long periods.
WARNING FOR IN-EAR-MONITORS (IEM product_ONLY)
This device is able to produce sound volume higher than 85 dB SPL. Please check your maximum allowed continuous noise exposure level based on your na tional employment protection requirements.
WARNING:
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOL UME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
90 dB SPL
95 dB SPL
100 dB SPL
105 dB SPL
at 8 hours
at 4 hours
at 2 hours
at 1 hour
110 dB SPL at ½ hour
115 dB SPL at 15 minutes
120 dB SPL Avoid or damage may occur
Introduction to EMC
Electromagnetic Interference (EMI) is any signal or emission, radiated in free space or conducted along power or signal leads, that endangers the functioning of radio navigation or other safety service or seriously degrades, obstructs, or repeatedly inter rupts a licensed radio communications service. Radio communications services include but are not limited to AM/FM commer cial broadcast, television, cellular services, radar, air-traffic control, pager, and Personal Communication Services (PCS). These licensed radio services, and unlicensed radio services, such as WLAN, ZIGBEE or Bluetooth, along with unintentional radiators such as digital devices contribute to the electromagnetic environment. Electromagnetic Compatibility (EMC) is the ability of items of electronic equipment to function properly together in the electron ic environment. While this equipment has been designed and determined to be compliant with regulatory agency limits for EMI, there is no guarantee that interference will not occur in a particular installation. Shure products are designed, tested, and classified for their intended electromagnetic environment. These electromagnetic en vironment classifications generally refer to the following harmonized definitions:
· Class B products are intended for use in residential/domestic environments but may also be used in non-residential/nondomestic environments.
Note: The residential/domestic environment is an environment where the use of broadcast radio and television receivers may be expected within a dis tance of 10 m from where this product is used.
· Class A products are intended for use in nonresidential/nondomestic environments. Class A products may also be uti lized in residential/domestic environments but may cause interference and require the user to take adequate corrective measures.
23/30
Shure Incorporated
EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance.
Regulatory Information for Class B EMC Products
CE Notice
Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with Euro pean Union requirements. The full text of the EU declaration of conformity is available at the following site: https://www.shure.com/enEU/support/declara tions-of-conformity.
UKCA Notice
Hereby, Shure Incorporated declares that this product with UKCA Marking has been determined to be in compliance with UK CA requirements. The full text of the UK declaration of conformity is available at the following site: https://www.shure.com/enGB/support/declara tions-of-conformity.
UK Cybersecurity
UK SI 2023 NO. 1007 STATEMENT OF COMPLIANCE Product Type: Relevant connectable products as defined by The Product Security and Telecommunications Infrastructure (Se curity Requirements for Relevant Connectable Products) Regulations 2023. Manufacturer Statement: We, Shure Incorporated, certify and declare as manufacturer under our sole responsibility, that the above mentioned product(s) conform(s) to Schedule 2 of the essential requirements of the listed applicable United Kingdom Statutory Instruments (including their amendments) and the associated norms. Information on how to report security issues: The latest version of Shure's Disclosure policy can be found at the following link: https://www.shure.com/en-GB/about-us/security Security update periods: Shure provides support regarding hardware and software updates that continue the integral cyber security safety of Shure products up to 24 months after end of life (AEOL). For the full statement regarding Shure's product support policy, and information regarding products end of life status information can be found at the following link: https:// www.shure.com/en-GB/about-us/security
Shure Incorporated 5800 Touhy Avenue Niles, Illinois, 60714-4608 U.S.A.
www.Shure.com.
Technical documentation is kept at: Shure Incorporated, Corporate Global Compliance Engineering Division
UK Importer/Representative: Shure UK Limited Unit 2, The 10 Centre, Lea Road, Waltham Abbey, Essex, EN9 1AS, U.K.
24/30
Phone: +44 (0)1992 - 703058 Email: EMEAsupport@shure.de
Shure Incorporated
On behalf of Manufacturer:
Chad Ayers 01 February 2024 Niles, Illinois Senior Director, Global Compliance
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operat ed in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with ra dio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the antenna of the radio/television receiver. · Increase the separation between this equipment and the radio/television receiver. · Plug the equipment into a different outlet so that the equipment and the radio/television receiver are on different power
mains branch circuits. · Consult a representative of Shure or an experienced radio/television technician for additional suggestions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.
For information regarding responsible party and other matters relating to FCC compliance, please contact Shure Incorporated, 5800 W. Touhy Avenue, Niles, Illinois 60714-4608 U.S.A. shure.com/contact
Canada, ISED Notice
Notice: The Industry Canada regulations provide that changes or modifications not expressly approved by Shure Inc. could void your authority to operate this equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Regulatory Information for Wireless Products
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
25/30
Shure Incorporated
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body/head. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body/head. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance.
Industry Canada (IC) Notices
This device contains licenceexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop ment Canada's licenceexempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. L'utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être coimplanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment could be installed and operated with minimum distance 0 cm between the radiator and your body. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be colocated or operating in conjunc tion with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These require ments set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard dur ing product certification for use when properly worn on the body/head. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement peutêtre installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps. L'utilisateur fi nal doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour répondre aux exigences d'exposition aux ondes radio établie par le développement én ergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg enmoyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée envertu de cette norme lors de la certification de produit à utiliser lorsqu'il est correctement porté sur les corps/ tête. Additional Canadian information on RF exposure also can be found at the following Web address: http://www.ic.gc.ca/eic/site/ smt-gst.nsf/eng/sf08792.html
ANATEL Notice
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas dev idamente autorizados. Para maiores informações, consulte o site da ANATEL http://www.anatel.gov.br.
26/30
Shure Incorporated
IFETEL Notice
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
KCC Notice
NBTC Notice
.
NCC Notice
Connection and use of this communications equipment is permitted by the Nigerian Communications Commission.
NCC Notice
614MHz-703MHz:
SRRC Notice
"" ISM
Regulatory Information for Wireless Products with Bluetooth
MIC Notice
27/30
Shure Incorporated
1.
2.
3. Shure http://www.shure.co.jp
2.4GHz FH-SS 10m 2,400MHz2,483.5MHz
Environmental Regulatory Information
Waste Electrical and Electronic Equipment (WEEE) Directive
In the European Union and the United Kingdom, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
Registration, Evaluation, Authorization of Chemicals (REACH) Directive
REACH (Registration, Evaluation, Authorization of Chemicals) is the European Union (EU) and the United Kingdom (UK) chemical substances regulatory framework. Information on substances of very high concern contained in Shure products in a concentration above 0.1% weight over weight (w/w) is available upon request.
US California Perchlorate (for Coin Cell Battery)
This product's coin cell battery may contain perchlorate and may require special handling when recycled or disposed. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Recycling Information
Please consider the environment, electric products and packaging are part of regional recycling schemes and do not belong to regular household waste.
28/30
RoHS RoHS
Shure Incorporated
Battery Regulatory Information
EU and UK Battery Directive
In the European Union and the United Kingdom, this label indicates that the batteries in this product should be collected sepa rately and not be disposed of with household waste. Substances in batteries can have a potential negative impact on health and environment and you have a role in recycling waste batteries thus contributing to the protection, preservation, and im provement of the quality of the environment. You should contact your local authority or retailer for details of the collection and recycling schemes available.
Note: There is no mercury content in the product.
Regulatory Model Number (RMN)
For regulatory identification purposes your product has been assigned a regulatory model number (RMN). This regulatory mod el number should not be confused with product number, as below.
RMN
· Headphones: MH36458 · USB-C Bluetooth Adapter: SBD001
29/30
Product Numbers · Headphones: Aonic 50 Gen 2 UC · USB-C Bluetooth Adapter: SBD1-UC
Certifications
Shure Incorporated
30/30
shure.com/battery-storage
Direitos do Consumidor — Agência Nacional de Telecomunicações
Shure (シュア）: マイク、ワイヤレスマイク、インイヤーモニタリング、イヤホン、ヘッドホン - Shure 日本
Shure: Microphones, Wireless microphones, in-ear monitoring, earphones, headphones - Shure USA
Shure Page - Shure United Kingdom