Smeg Variable Temperature Kettle

Product Description

The Smeg Variable Temperature Kettle (KLF04) is designed for heating water to specific temperatures. It features a sleek design and innovative technical solutions, coordinating with other Smeg appliances.

Key Components (Fig. A):

• 1) Anti-drip spout
• 2) Limescale filter
• 3) Soft opening lid
• 4) Handle
• 5) Water level indicator
• 6) Control panel
• 7) 360° base with temperature indicators
• 8) Cord wrap compartment (under base)
• 9) START/STOP button
• 10) Temperature selector
• 11) Keep Warm function button

Safety Device: The kettle is equipped with a safety device that automatically switches it off if activated without water. Allow the kettle to cool down before attempting to boil again.

Control Panel (Fig. B)

• START/STOP button (9): Activates/interrupts the heating cycle. The LED lights up when the cycle is active.
• Temperature selector (10): Allows selection of 7 temperature levels. Temperature indicator LEDs light up during the cycle.
• Keep Warm function button (11): Maintains the selected water temperature for up to 20 minutes. The LED lights up when active.

Using the Kettle

Before First Use:

1. Remove any stickers and clean the exterior with a damp cloth.
2. Remove and wash the filter with water and a soft brush.
3. Replace the filter correctly.
4. Remove the kettle from the base, open the lid, and fill with water up to the maximum level, ensuring it's not below the minimum indicated.
5. Close the lid and place the kettle on its base. Select the desired temperature (default is 100°C).
6. Press the START/STOP button to begin heating.
7. Boil the water and empty the kettle. Repeat this process at least three times.

Operation:

• Ensure the cord is wrapped under the base if necessary.
• Always use the handle to lift and pour.
• Fill the kettle, referring to the water level indicator and avoiding the maximum or minimum levels.
• Close the lid and place the kettle on its base.
• Plug the kettle into the power socket. All LEDs will light up, followed by a connection signal. The START/STOP and Keep Warm LEDs will turn off after 2 seconds.
• Use the temperature selector to choose the desired temperature. Move left to decrease, right to increase.
• Press the START/STOP button to start the heating cycle. The selected temperature LED will light up, and LEDs for lower temperatures will flash and then light up as the water heats.
• When the set temperature is reached, the corresponding LED will suspend, and the LEDs for lower temperatures will remain lit. The START/STOP LED will turn off, and the appliance will emit a sound indicating the end of the cycle. Empty the kettle.
• If no command is given within 60 seconds, the kettle enters standby mode (all LEDs off). Pressing any button reactivates it.

Special Functions:

• Keep Warm (11): Maintains the selected water temperature for up to 20 minutes. Can be activated during the heating cycle by pressing the Keep Warm button. Pressing again deactivates the function. The kettle enters standby after 20 minutes.
• Mute Function: Deactivates the audible signals. Activate by pressing the Keep Warm button for 5 seconds (LED flashes). Press again for 5 seconds to reactivate sounds.

Temperature Suggestions

Cleaning and Maintenance

Surface Cleaning:

• Regularly clean surfaces after each use once cooled.
• Apply cleaning product to a damp cloth and wipe the surface. Dry with a soft or microfiber cloth.
• Incorrect Use (Risk of Surface Damage): Do not use steam jets, products containing chlorine, ammonia, or bleach, abrasive or corrosive detergents, or rough materials.

Filter Cleaning:

1. Open the lid and remove the filter.
2. Wash the filter with running water and a soft brush.
3. Reinsert the filter.

Descaling:

Regular descaling prolongs the kettle's life, ensures high performance, and saves energy.

• Use a specific anti-limescale product or white vinegar.
• Using White Vinegar: Boil 1 liter of water, add 0.1-0.5 liters of white vinegar, let it sit overnight, empty, rinse with water, boil again, and empty. Repeat twice.

Tips: Frequent use or hard water increases limescale formation. Limescale can cause premature shut-off or longer boiling times. Clean more frequently with daily use or use purified water.

Troubleshooting

Manufacturer Information

The manufacturer reserves the right to make changes to products without prior notice. Illustrations and descriptions are indicative.