JVC HA-A7T True Wireless Headphones

Important Safety Information

Hearing Safety

Do not listen at high volume levels for extended periods to prevent possible hearing damage. If you experience ringing in your ears, reduce the volume or discontinue use.

Traffic Safety

Do not use while operating a motorized vehicle or cycling. Pay special attention to traffic around you when using the headphones outdoors; failure to do so could result in an accident. Do not turn up the volume so high that you cannot hear surrounding sounds.

Battery Safety

Products and batteries with the symbol ?️ (crossed-out wheeled bin) cannot be disposed of as household waste. This product contains a built-in rechargeable battery that is not replaceable. Do not expose the product to excessive heat such as sunshine or fire. Danger of explosion if the battery is replaced by the user. Do not attempt to replace the battery yourself.

Technical Specifications

• Frequency Range: 20 Hz–20,000 Hz
• Power Source: Built-in Lithium-ion polymer rechargeable battery
• Battery Life: Approx. 6 hours (varies with usage conditions)
• Charging Time: Approx. 2 hours (earphones) / Approx. 2.5 hours (charging case)
• Operating Temperature Range: 5 ℃ to 40 ℃
• Charging Temperature Range: 5 ℃ to 35 ℃
• Water/Dust Resistance: IPX4 (earphones)
• Weight: Approx. 4.8 g (each earphone) / Approx. 38.9 g (charging case) (including built-in lithium-ion polymer rechargeable battery)

Bluetooth Specifications

• Supported Bluetooth Profiles: A2DP/AVRCP/HFP
• Frequency Range: 2.402 GHz - 2.480 GHz
• Output Power: +9.9 dBm (MAX)
• Power Class: 1

Getting Started and Usage

Charging the Earphones

Place the earphones into the charging case. Ensure the charging terminals on the earphones and inside the case are clean. Periodically clean the charging terminals with a cotton swab.

Powering On and Pairing

1. Remove any insulation film from the charging terminals if present.
2. Place the earphones in the charging case.
3. Press and hold the button on the charging case for approximately 1 second. Release your finger when a beep is heard. The indicator light on the left earphone will flash quickly, then slowly.
4. On your device (e.g., smartphone), go to Bluetooth settings and select "JVC HA-A7T" from the list of available devices to pair.

Adjusting for Fit

Adjust the earpieces to achieve a better and more secure fit in your ears.

Storage

After use, place the earphones firmly back into the charging case to charge.

Compliance Information

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with FCC radiation exposure limits for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.

For Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. HA-A7T has been tested and found to comply with ISED radiation exposure limits and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

JVC declares that this System [HA-A7T] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be downloaded from http://www.jvc.co.jp/ecdoc/.

Manufacturer: JVCKENWOOD Corporation, 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN.

FCC ID: 2ALVKHA-HAA7T, IC: 11136A-HAA7T.

Additional Information

For detailed operations such as phone calls, troubleshooting, and information on the European Guarantee, please refer to the user manual available online.