JVC HA-A25T / HA-Z250T Wireless Headphones

Disposal Information

Products and batteries with the symbol ?️ cannot be disposed of as household waste. This product contains a rechargeable battery. Contact a JVCKENWOOD authorized dealer for disposal.

Important Safety Warnings

• ⚠️ Do not listen at high volume levels for extended periods.
• ⚠️ Do not use while driving or cycling.
• ⚠️ Pay special attention to traffic around you when using the headphones outside. Failure to do so could result in an accident.
• ⚠️ This product with a built-in battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• ⚠️ This product contains a rechargeable battery, which is not replaceable. Danger of explosion if the battery is replaced by the user. Do not attempt to replace the battery yourself.

Declarations of Conformity

For Europe: JVCKENWOOD declares that the radio equipment [HA-A25T / HA-Z250T] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.jvc.net/euukdoc/

For United Kingdom: JVCKENWOOD declares that the radio equipment [HA-A25T / HA-Z250T] is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at: https://www.jvc.net/euukdoc/

Bluetooth Specification

Frequency range: 2.402 GHz - 2.480 GHz

Output power: +2.0 dBm (MAX), Power Class 1

How To Use

Step 1: Charging

Remove the earphones from the charging case. Ensure the earphones are charged before use. The [charging terminals] should be clean for optimal performance. Gently wipe them with a cotton swab if necessary.

Step 2: Pairing

Open the charging case with the earphones inside. The indicator on one earphone flashes quickly, while the other flashes twice slowly. Turn on Bluetooth on your device and select “JVC HA-A25T” from the device list.

Step 3: Wearing the Earphones

Ensure the “JVC” logo is on the upper side. Fit the earphone to your ear by adjusting its position for a secure and comfortable fit.

Step 4: Controls and Features

The earphones feature touch sensors [touch sensor] for control.

Sound Mode

Tap the touch sensor multiple times (e.g., 1x, 2x, 3x) to cycle through sound modes like NORMAL, BASS, and CLEAR. A long press (1s) may activate other functions.

Ambient Sound / Noise Canceling

Tap the touch sensor to toggle ambient sound listening (ON/OFF) or noise canceling (ON/OFF). Note: Music volume may increase automatically when ambient sound is turned off.

Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

Further Information

For detailed operations such as phone calls, troubleshooting, and information on the European Guarantee, please refer to the full user manual available at https://manual3.jvckenwood.com/accessory/headphones/global/.