Easy@Home EWF003 Water Flosser User Manual
Thank you for purchasing Easy@Home Water Flosser.
The Easy@Home Water Flosser offers a unique combination of water pressure and pulsation designed to clean deep between teeth and along the gumline. It effectively removes food debris and harmful bacteria that traditional brushing or flossing may miss. Additionally, it massages and stimulates gums to improve blood circulation, promoting stronger and healthier gums. This device is also ideal for cleaning around dental bridges, braces, and crowns, allowing you to enjoy an oral spa experience at home.
Model: EWF003
Safety Information
Contraindications
- Read this instruction book thoroughly before use.
- Do not immerse the flosser in water or any other liquid.
- Do not use it while bathing or showering.
- Consult your dentist any time if you experience discomfort while using this water flosser.
Warning
- This product can be used by children ages 8 and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge only if they are under supervision or have been given instructions on the proper use of the product in a safe way and understand the hazards involved.
- Water Flosser shall be used only with cold or warm water, or specific solutions as defined in the instruction manual.
- Keep away from small children.
- This product contains built-in batteries that are non-replaceable.
Precautions
- If the product is opened/disassembled for ANY reason, warranty is VOID.
- Do not use the product if you see a damaged charging cord or defect at any part of the product.
- Do not direct water under the tongue, into the ear, nose, or other delicate areas. This product is capable of producing pressures that may cause serious damage in these areas.
- Do not direct water into the nose or ear. The potentially deadly amoeba, Naegleria fowleri, may be present in some tap water or unchlorinated well water and may be fatal if directed into these areas.
- Use this product only as indicated in these instructions or as recommended by your dental professional.
- Magnetic field: Pacemakers and similar implanted medical devices may be affected by the magnet produced by this product while running. If you have an implanted medical device, please consult your physician before purchasing and using.
- Do not drop or insert any foreign object into any opening of the product.
- Fully charge the device before using.
- Do not use this product outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Children should be supervised to ensure that they do not play with this product.
Product Description
The water flosser unit features a nozzle tip, nozzle rotary knob, and nozzle release button. Controls include an On/Off button and a Mode button. Indicator lights show the status for Strong, Normal, Soft, Pulse, Child, and Charging modes. The unit has a water tank and a water valve, with a USB charging port.
Operating Procedures
Preparation Work
Important! Before using for the first time, please fully charge the device. During charging, the product CAN NOT be used.
Insert and Remove Tips
To insert a tip, place it into the center of the knob until there is a "click" sound. To remove the tip, press the nozzle release button.
Usage Instructions
This product has a memory function. The mode remains the same as the last mode used when switched on again. Please select mode before switching the product on.
- The charging indicator light stays red when charging, and stays green when it is fully charged.
- When the charging indicator light becomes red and flashes, it means the battery is low and recharging is required.
- This product can NOT be used during charging.
- With the ergonomically designed and 360° rotated tip, you can easily control water flow to reach all areas of the mouth.
Recommended Techniques
Direct the jet stream at a 90° angle to your gumline.
Close lips to avoid splashing but allow water to flow freely from mouth into the sink. For best result, start in the molar area (back teeth) working toward the front teeth. Glide jet tip along gumline and pause briefly between teeth. Continue until all areas around and between the teeth have been cleaned.
Storage Guidelines
- Please switch off the power, as well as empty the water tank.
- Removed nozzle tips can be stored in the water tank.
- Use both hands rotating downwards in a clockwise direction to remove the water tank from the body.
Battery Maintenance and Handling
Battery Maintenance
- For the first use, the product needs to be fully charged, for approximately 5 hours.
- If the product is to be stored for a long time, please fully charge it in advance.
- In order to extend battery lifespan, recharge it in time when low power indication is seen.
Battery Handling
The product has a built-in lithium battery which cannot be replaced. To protect the environment, do not throw away the product with other normal household waste at the end of its life. Deliver it to an official collection point for recycling.
Accessories
| Pictures (Description) | Function | Replacement Interval |
|---|---|---|
| Jet Tips | For general use. Cleans deep between teeth and below the gumline. Clinically proven to be twice as effective as string floss for improving gum health. | Replace every 3 months |
| Orthodontic Tip | For orthodontic appliances and dental braces. Clinically proven to remove three times as much plaque as traditional string floss and significantly improve gum health for orthodontic patients. The innovative tapered brush removes hard-to-reach plaque around orthodontic brackets and wires. It also helps flush out bacteria and food debris from around the teeth and under the gums. | Replace every 3 months |
| Pocket Tip | For periodontal pockets and furcations. A soft rubber tip designed for gentle, low-pressure delivery of therapeutic rinses below the gumline. Clinically proven to access 90% of a 6mm pocket. | Replace every 3 months |
| Plaque Tip | The Tips use for dental areas that are susceptible to plaque accumulation, including implants, crowns, bridges, and permanent retainers. | Replace every 3 months |
| Tongue Cleaner | For fresh breath. With a gentle scraping and flushing action, the Tongue Cleaner removes bacteria and sulfur compounds that reside on the tongue and cause bad breath. Daily use can help prevent halitosis. | Replace every 6 months |
Note: All the accessories we quote.
Common Problems and Solutions
| Problems | Possible Causes | Solutions |
|---|---|---|
| Leakage of water at connection parts | 1. The jet nozzle or the water tank are not set in position. 2. The o-ring seal at the connection part is missing or damaged. |
1. Set them in position. 2. Contact the seller for assistance. |
| Inadequate water pressure | Low power | Charge immediately |
| Unable to switch on | Low power | Charge immediately |
| Motor is running but water is not sprayed out | The nozzle is clogged or the water valve seal is not tight | Dredge the nozzle, make the water valve seal tight |
Contents and Warranty
Included in the box:
- 1 x Water Flosser
- 2 x Jet Tips
- 1 x Orthodontic Tip
- 1 x Pocket Tip
- 1 x Plaque tip
- 1 x Tongue Cleaner
- 1 x Storage bag
- 1 x USB charging cable
- 1 x User manual
Expiry date / Service life / Warranty:
- Expiry date: 3 years
- Warranty: 1 year
Environmental Conditions
Storage and Transportation Condition
Working environment:
- Temperature: 5~40°C
- Humidity: 15% to 85%RH
- Atmospheric pressure: 86Kpa to 106 Kpa
Transport & storage environment:
- Temperature: -20~55°C
- Humidity: ≤85%RH
- Atmospheric pressure: 86Kpa to 106 Kpa
Bibliography / Complied Standards
STANDARDS USED(DATE):
- EN 55014-1:2017 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2016 + COR1:2016)
- EN 55014-2:2015 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
- IEC 60335-2-52 Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
FCC and EMC Information
The device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This includes compliance with EMC Emission standards for Conducted Emission and Radiated Emission.
EMC Emission Summary:
| Standard | Test Item | Limit | Result |
|---|---|---|---|
| FCC Part 15 Subpart B ANSI C63.4: 2014 | Conducted Emission | Class B | N/A |
| Radiated Emission | Class B | PASS |
EMC Immunity Summary:
| Standard | Test Item | Performance Criteria | Judgment |
|---|---|---|---|
| BS EN 55014-1:2017/A11:2020 | Conducted Emission Disturbance Power(30-300MHz) | N/A | N/A |
| Radiated Emission 30MHz to 1000MHz | Class B | PASS | |
| BS EN 55014-2:2015 | |||
| BS EN 61000-4-2:2009 | Electrostatic Discharge | B | PASS |
| BS EN 61000-4-3:2006 +A1:2008+A2:2010 | RF Electromagnetic Field | A | PASS |
Note: "N/A" denotes test is not applicable in this test report. For client's request and manual description, the test will not be executed.
Symbols and Manufacturer Information
Explanation of Symbols
- WEEE (Waste Electrical and Electronic Equipment): Symbol indicating the product is subject to WEEE directive.
- Recyclable: Symbol indicating the product is recyclable.
- CE marking of conformity: Indicates the product conforms to EU directives.
- FC: Federal Communications Commission - indicates compliance with FCC regulations.
- Manufacturing date: Indicates the date of manufacture.
- LOT: Batch code.
- Temperature limit: Indicates the operating temperature range (5°C ~ 40°C).
- Humidity limitation: Indicates the operating humidity range (15% ~ 85%).
- Atmospheric pressure limitation: Indicates the operating atmospheric pressure range (86kPa ~ 106kPa).
Manufacturer Information
For questions or comments, please visit Healthcare-Manager.com.
Please call toll-free: 1-855 822-6999 (Monday-Friday, 9 a.m.-5 p.m. CST).
E-MAIL: service@healthcare-manager.com
Manufactured for: Easy Healthcare Corporation
360 Shore Dr. Unit B, Burr Ridge, IL USA 60527
Made in China
Document Version: V01: 20220411
