Introduction
This user guide from GOWIN provides detailed information on the Arora V Hardened MIPI D-PHY. It covers the product's features, port descriptions, configuration, and usage, aiming to assist users in quickly understanding and utilizing the Arora V MIPI D-PHY.
Key Features
- Supports the standard MIPI Alliance Standard for D-PHY Specification, version 1.2.
- 15K/25K/60K devices support Combo-PHY for RX/TX configuration.
- Supports unidirectional High-Speed (HS) mode with data rates up to 2.5 Gbps per lane and up to 10 Gbps per group (4 data lanes).
- Supports up to two MIPI D-PHY groups, each with up to 4 data lanes and 1 clock lane.
- Features bidirectional Low-Power (LP) operation mode for data transfer at 10 Mbps.
- Supports high-speed synchronization, including Word Alignment and Lane Alignment.
- MIPI D-PHY RX supports 1:8 and 1:16 modes.
- MIPI D-PHY TX supports 8:1 and 16:1 modes.
- Supports MIPI DSI and MIPI CSI-2 link layers.
- Includes dedicated MIPI Bank for hard macro MIPI D-PHY.
Related Documentation
Additional documentation, including product data sheets, can be downloaded from the GOWIN Semiconductor website: www.gowinsemi.com.cn.
Technical Support
For any questions or suggestions regarding the product, please contact GOWIN Semiconductor support:
- E-mail: support@gowinsemi.com
- Tel: +86 755 8262 0391