Berger USB Battery Fairy Lights 100 LED Baubles

Specifications

• Total Length: 11 m
• USB Cable Length: 30 cm
• LED Quantity: 100 LEDs
• Bubble Ball Diameter: 1.8 cm
• Light Color: Warm White
• Power Supply: 3 AA batteries or USB
• Modes: 8 modes + 13-key remote controller

Features

Dual Power Supply

This light string can be powered either through a USB plug or with 3 AA batteries (not included) for added convenience and flexibility.

Remote Control

The included 13-key remote control allows you to conveniently adjust the settings and modes of the light string from a distance.

8 Light Modes

1. Combination: Automatically converts every mode.
2. In wave: Waving from bright to dim repeatedly.
3. Sequential: Single lamps flickering.
4. Slo glo: Single lamps fade slowly from bright to dim repeatedly.
5. Chasing/Flashing: Double lamps chasing and flashing.
6. Slow Fade: Double lamps fade slowly from bright to dim repeatedly.
7. Twinkling/Flashing: Starry flashing.
8. Steady on.

Operation

Waterproof

This product is IP65 rated and is suitable for indoor and outdoor use.

Easy Operation

Control the light string modes either through the 3AA battery box or the remote control.

Usage Instructions

1. Power Supply:
   USB Mode: Connect the USB plug to a power source such as a USB port on a computer, power bank, or USB wall adapter.
   Battery Mode: Insert 3 AA batteries into the battery box. Ensure correct polarity (+/-) when inserting batteries.
2. Turning On/Off:
   Press the power button on the 3AA battery box to turn the light string on or off. Alternatively, use the ON/OFF button on the remote control to power the lights.
3. Mode Selection:
   Use the "MODE" button on the remote control to cycle through the 8 different lighting modes. Each press of the "MODE" button will change the mode sequentially.
4. Brightness Adjustment:
   Adjust the brightness of the lights using the "BRIGHTNESS +/-" buttons on the remote control. Press the "+" button to increase brightness and the "-" button to decrease it.
5. Timer Function (Optional):
   The remote control features a timer function for added convenience. Press the "TIMER" button to activate the timer. The lights will automatically turn off after 6 hours and then turn on again after 18 hours.

Safety Precautions

1. Always use the appropriate power source (USB or batteries) as indicated in the instructions.
2. Do not mix old and new batteries or different types of batteries.
3. Do not attempt to disassemble or modify the product yourself. This may result in electric shock or damage to the product.
4. Keep the product away from children and pets to prevent accidents.