Kitchen Box Capri M
Setup and Use Guide
Brand: Berger
Model: Capri M
Product Number: 549267
Remove the folding kitchen box from its carry bag.
[Image: A folded kitchen box is shown inside a black fabric carry bag with handles.]
Attach the supplied screw feet to the underside of the folding box.
[Image: Close-up of the bottom of the folded kitchen box. Arrows indicate screw feet being attached to designated points.]
Now extend the folding box upwards to its full height.
[Image: The partially extended kitchen box. Red arrows indicate upward movement.]
Straighten the four articulated aluminium rods completely outwards. This action stabilizes the folding box.
[Image: The kitchen box is partially open. Arrows show four hinged aluminium rods being pulled outwards and locked into place to provide structural support.]
Move the fully assembled and stabilized folding box to its desired position.
[Image: The kitchen box is fully assembled and standing upright, showing its shelves and structure.]
Optionally, mount the supplied wind protection screen to the back of the kitchen box. Position it as desired.
[Image: The assembled kitchen box. Arrows show a fabric wind protection screen being attached to the rear of the unit.]
