Anolis Eminere Side 2 0 LED Lighting User Manual

User Manual for Anolis models including: Eminere Side 2 0 LED Lighting, Eminere Side 2 0, LED Lighting, Lighting

User manual Eminere Side 2 0

henac

Anolis Lighting

File Info : application/pdf, 27 Pages, 3.77MB

User manual Eminere Side v2.0 January 2023

QR code for user manual
Version 2.0

Eminere Side
Table of contents
1. Safety instructions ......................................................................................................................................................3 2. Fixture exterior view...................................................................................................................................................4 3. Installation ..................................................................................................................................................................5
3.1 Mounting the fixture ............................................................................................................................................5 3.2 Connection to mains.............................................................................................................................................5 3.3 The Booster box....................................................................................................................................................9 3.4 The Booster box installation...............................................................................................................................12 3.5 Jumper cable assembling....................................................................................................................................13 4. Software update .......................................................................................................................................................16 5. Technical specifications ............................................................................................................................................17 6. Cleaning and maintenance .......................................................................................................................................22 6.1 Disposing of the product ....................................................................................................................................22 7. ChangeLog ................................................................................................................................................................23
2

Eminere Side
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR Eminere Side ! Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. Unauthorized modification will void warranty.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
This fixture should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized distributor or local power company. Always disconnect the fixture from AC power before cleaning, servicing or installing. Make sure the data/power cable is not damaged by sharp edges. Check the fixture and the power cord from time to time. Do not install the unit near an open flame. During operation the housing becomes hot. Refer servicing to qualified service personnel. This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with a protective earthing connection. Do not connect this fixture to a dimmer pack. LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light output.
The fixture was designed for outdoor use. This fixture must not be used for underwater installation. When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust. Avoid using the unit in locations subject to possible impacts. The fixture body never must be covered with cloth or other materials when the fixture is under operation.
3

Eminere Side Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened. The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance. Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons not qualified to operate the fixture. Most damages are the result of unprofessional operation! Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity. The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given by this standard (e.g. transmitters in surrounding area) before installing the equipment. Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment Emission Requirements according to class B. Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons! Please use the original packaging if the fixture is to be transported. If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock etc.
2. Fixture exterior view
1. Transparent glass cover 2. LED module 3. Input connector 4. Output connector 5. Mounting brackets 6. Aluminium base
4

Eminere Side
3. Installation
3.1 Mounting the fixture
The Eminere Side can be arranged in any orientation on a flat, non-flammable surface by means of two mounting brackets (5), the LED module (2) can be tilted 120° to adjust desired beam position.

Ensure that the structure to which you are attaching the unit is secure.

3.2 Connection to mains

The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. This device falls under class one and must be grounded!

The Eminere Side is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power source from 120-277 Volts. Wiring of input/output connectors:

Input - panel connector (front view)

Output - panel connector (front view)

Fixture´s Amphenol connectors are dust and water protected according to IP 67 by mating with related Amphenol connectors.
5

Eminere Side They cannot stay disconnected outdoor. The output panel connector at last fixture in the Eminere Side chain has to always be covered with the watertight cap to keep declared IP rating. The Eminere modules should be connected to the E-box which allows power supply of the Eminere modules and their control.
Do not connect (disconnect) Eminere Sides to the E-box or Booster box and each other when they are under voltage!
When you change any setting of the E-box, disconnect the E-box from power and connect it to power again to activate changes which you have made.
Examples of connection for various versions of the E-box. Please read the E-box user manual for more information about its setting and connection to Eminere modules. Needed cables are stated in the chapter "Technical information". E-box Daisy
E-box Star
6

E-box Pro

Eminere Side

E-box Lite 7

Eminere Side
Number of connected Emineres Side to one E-box output depends on a cable length, power voltage, type of and E-box. The tables below state max. theoretical number of Emineres connected to the one LED output of the E-box without Booster boxes. The following tables apply for the Standard mode of E-boxes

EMINERE SIDE 1 Cable length *
10 m 20 m 30 m 50 m 70 m 100 m 200 m

120V 83 83 58 35 25 17 9

Voltage

190V

230V

131

159

131

159

131

159

128

277V 191 191 191 186 133 93 47

EMINERE SIDE 2 Cable length *
10 m 20 m 30 m 50 m 70 m 100 m 200 m

120V 41 41 28 17 12 9 4

Voltage

190V

230V

277V 94 94 94 91 65 46 23

EMINERE SIDE 3 Cable length *
10 m 20 m 30 m 50 m 70 m 100 m 200 m

120V 28 28 19 12 8 6 3

Voltage

190V

230V

277V 64 64 64 62 44 31 16

Eminere Side

EMINERE SIDE 4 Cable length *
10 m 20 m 30 m 50 m 70 m 100 m 200 m

120V 21 21 15 9 6 4 2

Voltage

190V

230V

277V 48 48 48 47 38 23 12

* Cable length is a total cable length between E-box and last connected Eminere Side. Example: Total cable length=L1+L2+L3

Notice for the E-box Star: The tables above state max. total number of Emineres Side connected to 6 LED outputs of the E-box Star (or max. number of Emineres Side connected to one output if the rest of outputs is not connected). The E-box Star has only one power input!
The table below states max. number of Emineres Side connected to the one LED output of the E-box using Booster boxes (which compensate a voltage drop) regardless voltage and cable length.

3.3 The Booster box
To compensate a voltage drop in large installation, the Booster boxes have to be connected in the chain of Emineres Side at every LED output of the E-box.
The following tables give numbers of Emineres Side after which the Booster box has to be installed in the chain of Emineres Side (at one LED output of the E-box). The following tables apply for the Standard mode of E-boxes.

EMINERE SIDE 1

Cable length 10 m 20 m
30 m 50 m

120V
83,166 83,166 58,116,174 35,70,105,140,175

Max. number of Emineres 1= 191

Voltage 190V

230V

131 131 131 88,176

159 159 159 128
9

277V
186

Eminere Side

70 m 100 m
200 m

25,50,75,100,125,150,175 63,126,189

92,184

17,34,51,68,85,102,119, 136,153,170,187

44,88,132,176 64,128

9,18,27,36,45,54,60,72,81 22,44,66,88,110, 32,64,96,128,

90,99,108,117,126,135,144 132,154,176

160

153,162,171,180,189,

133 93,186
47,94,141, 188

EMINERE SIDE 2

Max. number of Emineres 2= 94 Voltage

Cable length
10 m

41,82

120V

190V 64

230V 78

277V -

20 m 41,82

30 m 28,56,84

50 m 17,34,51,68,85

43,86

70 m 12,24,36,48,60,72,84

31,62,93

45,90

100 m

9,18,27,36,45,54,60,72,81, 21,42,63,84 90

31,62,93

46,92

200 m

4,8,12,16,20,24,28,32,36 11,22,33,44,55, 40,44,48,52,56,60,64,68,72 66,77,88 76,80,84,88,92

16,32,48,64,80

23,46,69,92

EMINERE SIDE 3

Cable length
10 m
20 m

28,56 28,56

120V

Max. number of Emineres 3= 64

Voltage 190V

230V

277V
-

30 m 19,38,57

50 m 12,24,36,48,60

29,58

70 m 8,16,24,32,40,48,56

21,42,63

31.62

100 m

6,12,18,24,30,36,42,48,54, 15,30,45,60 60

21,42,63

31,62

200 m

3,6,9,12,15,18,21,24,27,30, 7,14,21,28,35,42 11,22,33,44,55 33,36,39,42,45,48,51,54,57 49,56,63 60,63

16,32,48,

Eminere Side

EMINERE SIDE 4

Cable length
10 m
20 m

21,42 21,42

120V

Max. number of Emineres 4= 48

Voltage 190V

230V

30 m 15,30,45

50 m 70 m

9,18,27,36,45 6,12,18,24,30,36,42

22,44 16,32

32 23,46

100 m 200 m

4,8,12,16,20,24,28,32,36, 11,22,33,44 40,44

16,32

2,4,6,8,10,12,14,16,18,20, 5,10,15,20,25,30 8,16,24,32,40 22.24.26,28,30,32,34,36,38 35,40,45 40,42,44,46

277V
47 38 23,46
12,24,36

Example: E-box Daisy, Power supply= 230V, Cable length=70m, fixture=Eminere Side 2 The Booster box has to be connected after every 45th Eminere Side 2 (fixture 45 and fixture 90) from 94 fixtures.

Eminere Side
3.4 The Booster box installation
ALWAYS DISCONNECT THE EMINERES SIDE FROM MAINS BEFORE CONNECTING/DISCONNECTING THE BOOSTER BOX.
The Booster box falls under protection class I. Therefore, every Booster box has to be connected to a mains socket outlet with a protective earthing connection.
1.Unscrew the four screws (1) from the cover (2) on the Booster box to get access to the terminal block (3) and two mounting holes of diameter of 4.6 mm (4). 2. Screw the Booster box on a non-flammable flat surface and connect cables.

The Cable gland M20x1.5 for Power IN (5) is intended for a cable of a diameter of 7-13mm. Remove the end cap from the cable gland before passing the cable. Power connection

(earth)

Core (EU)

Braun

Blue

Green/yellow

Core (US)

Black

White

Green

We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the gland body.

3. Screw the cover (2) back on the Booster box. 12

Eminere Side

3.5 Jumper cable assembling
1. Dismantle the connector and slide its parts onto the cable (6). Use the seal with inner diameter of 14.5 mm for the Anolis cable (P/N 13053138 or P/N 13053139). The seal with inner diameter of 14.5 mm serves for cable of diameter 10-14.5mm. The seal with inner diameter of 10 mm serves for cable of diameter 8-10mm.

Parts of the connector

Detail of Sealing circle (2) placing

2. Put the seiling circle (2) on the connector with screws (1). 3. Remove insulation from the cable (6) and from individual wires and fasten three terminals on data wires. CE version
13

US version

Eminere Side

4. Put parts of the connector on the cable (6) and connect wires to the connector. First connect power wires (L,N, Earth) and after that data wires (D+, D-, 0V). Avoid excessive torsion of data wires!

CE version

Male

Female

US version

Male

Female

Eminere Side 5. After connecting wires to the connector, tighten the three data wires (D+,D-, 0V) by means of the cable binder (7).
6. Screw the clamp ring (3) to the connector (1), insert the seal (4) to the clamp ring (3) and tighten the sealing nut (5) enough. During the steps DO NOT TWIST the cable (6). 7. Use the same procedure to assemble the connector on the second end of the cable. IMPORTANT Do not bend the cable near to the connector, minimum distance for bending is 50mm.
15

Eminere Side
4. Software update
Software update of Eminere has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Emineres to the update mode automatically. Please see https://www.robe.cz/robe-uploader/ for more information. DMX or Ethernet connection via E-box If the option Standard is selected from the menu E-box mode and LED modules are connected in series, the E-box will be updated including connected Eminere modules. You have to use the file EminereEbox.lib in the ROBE Uploader for this operating mode. If the option Pass-Thr is selected from the menu E-box mode and LED modules are connected in series, you have to do the following steps to update Emineres including the E-box:
1. Set the E-box to the Standard mode and switch it off/on. Only E-box will be shown in the ROBE Uploader. You have to use the file EminereEbox.lib in the ROBE Uploader for software update of the E-box and connected LED modules.
2. After updating, set the E-box to the Pass-Thorough mode and switch it off/on. For more information about updating please see the E-box Lite/Daisy/Star user manual.
16

Eminere Side

5. Technical specifications
Power supply · Electronic auto-ranging · Input voltage: 120 - 277V AC, 50-60 Hz · Power consumption: Eminere Side 1: 25W Eminere Side 2: 45W Eminere Side 3: 65W Eminere Side 4: 85W · Inrush current: Eminere Side 1: <70A/250µs Eminere Side 2: <70A/250µs Eminere Side 3: <100A/200µs Eminere Side 4: <100A/200µs

Optic

· Light source: Eminere Side 1: 12 x high power LEDs Eminere Side 2: 24 x high power LEDs Eminere Side 3: 36 x high power LEDs Eminere Side 4: 48 x high power LEDs
· Colour variants: RGBW, RGBA, single colour · Beam Angle:
Symetrical: 9°, 15°, 30°, 50°, 65°, 100° Bi-symetrical: 10° x 30°, 30° x 10°, 10° x 60°, 60° x 10°, 35° x 70°, 70° x 35°, 15° x 90°, 90° x 15° Wallwasher, Wide Wallwasher · Projected Lumen Maintenance: L90B10 >90.000 hrs, Ta = 25°C / 77°F

Compatible drivers · E-box Daisy 1 Output 1 Main power Input Control: DMX, Art-Net, sACN , W-DMX control, RDM Pixel control (1px= 1ft) 120-277 V Input Connection via terminal blocks, inlets via grommet IP67

· E-box Star 6 outputs 1 Main power Input Control: DMX, Art-Net, sACN , W-DMX control, RDM Pixel control (1px= 1ft) 120-277 V Input Connection via terminal blocks, inlets via grommet IP67

· E-box Pro 6 outputs 6 Main power Inputs Control: DMX, Art-Net, sACN , W-DMX control, RDM Pixel control (1px= 1ft) 120-277 V Input Connection via terminal blocks, inlets via grommet 17

Eminere Side

IP67

· E-box Lite 1 output 1 Main power Input Control: DMX, W-DMX control, RDM Pixel control (1px= 1ft) 120-277 V Input Connection via screw terminal blocks, inlets via grommet IP67

Protection factor · CE: IP 67 · US: Suitable for wet location

Impact rating · CE: IK06

Operating ambient temperature range · -20°C /+40°C (-4°F /+104°F)

Operating temperature · +67°C @ Ambient +40°C (+153°F @ Ambient +104°F)

Connection · Input: panel connector Amphenol ABAB-DMQ06000021-IN (P/N13052952) · Output: panel connector Amphenol ABAB-DAQ06000021 (P/N13052953) + water-tight cap

Mounting method · Via two L-shape brackets · LED module "tilt" adjustment range: -105°/+15°

Sizes

· Eminere Side 1 (300mm / 1ft) · Eminere Side 2 (600mm / 2ft) · Eminere Side 3 (900mm / 3ft) · Eminere Side 4 (1200mm / 4ft)

Housing · Aluminium extruded body with die-casted end caps · Tempered glass

Cooling system · Convection

Total heat dissipation · Eminere Side 1: 61 BTU/h (calculated) · Eminere Side 2: 130 BTU/h (calculated) · Eminere Side 3: 177 BTU/h (calculated) · Eminere Side 4: 228 BTU/h (calculated

Weight ·Eminere Side 1: 2.95 kg (6.5 lbs) ·Eminere Side 2: 4.75 kg (10.47 lbs)
18

·Eminere Side 3: 7.0 kg (15.43 lbs) ·Eminere Side 4: 8.92 kg (19.67 lbs)
Dimensions (All dimensions in mm [inch]) · Eminere Side 1

Eminere Side

· Eminere Side 2

· Eminere Side 3

Eminere Side

· Eminere Side 4

· Booster box

Eminere Side

Included items · 1 x Eminere Side · 1 x User manual
Optional accessories CE Leader Cables FF: Leader Cable FF 2m (P/N 13053005) Leader Cable FF 5m (P/N 13053006) Leader Cable FF 10m (P/N 13053007) Leader Cable FF 25m (P/N 13053008) Leader Cable FF 50m (P/N 13053009)
US Leader Cables FF: Leader Cable FF 2m (P/N 13053010) Leader Cable FF 5m (P/N 13053011) Leader Cable FF 10m (P/N 13053012) Leader Cable FF 25m (P/N 13053013) Leader Cable FF 50m (P/N 13053014)
21

Eminere Side
Jumper Cables FF/FM: Jumper Cable FF/FM 0,25m (P/N 13053052) Jumper Cable FF/FM 0,5m (P/N 13053053) Jumper Cable FF/FM 1m (P/N 13053054) Jumper Cable FF/FM 2m (P/N 13053055) Jumper Cable FF/FM 3m (P/N 13053056) Jumper Cable FF/FM 5m (P/N 13053057) Jumper Cable FF/FM 10m (P/N 13053058)
Waterproof Cover Cap FM ZAHB-0006 (P/N 17031173) Field Installable Connector FF (P/N 13053003) Field Installable Connector FM (P/N 13053004)
E-boxes: E-box Daisy (P/N 10063655) E-box Daisy/W (P/N 10063638) E-box Lite (P/N 10063657) E-box Lite/W (P/N 10063653) E-box Star (P/N 10063656) E-box Star/W (P/N 10063644)
Booster box (P/N 10063712)
Shield for Eminere 1 RAL9011 (P/N 10980488) Shield for Eminere 2 RAL9011 (P/N 10980489) Shield for Eminere 3 RAL9011 (P/N 10980490) Shield for Eminere 4 RAL9011 (P/N 10980491)
6. Cleaning and maintenance
DANGER ! Disconnect from the mains before starting any maintenance or cleaning work
Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild, nonabrasive washing detergent. Rinse it. Maintenance and service operations are only to be carried out by a qualified person. Should you need any spare parts, please use ROBE OEM parts.
6.1 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes.
22

7. ChangeLog

Eminere Side

This section summarizes changes in the user manual.
Version of Date of issue Description of changes the manual

1.1

10/07/2020 Voltage range changed

1.2

23/07/2021 Optional accessories changed

1.3

19/08/2021 Jumber cables changed in Optional accessories

1.4

19/10/2021 Technical specifications changed

1.5

26/11/2021 Optional accessories changed

1.6

20/12/2021 Jumper cable mounting added

1.7

06/01/2022 Jumper cable mounting changed

1.8

23/02/2022 Sealing circle added to jumper cable mounting

1.9

19/05/2022 QR code added

2.0

10/01/2023 Software update description

Specifications are subject to change without notice. January 10, 2023 Copyright © 2019-2023 Robe Lighting - All rights reserved Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
23

DMX protocol

Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol

Eminere Inground 2/4 - DMX protocol

Eminere Remote 1/2/3/4 - DMX protocol

Version: 3.1 (23 modes in total), software version 3.0 and higher

Mode/Channels in all

Mode 1: RGBW(A)-8bit, Mode 2: RGB 8-bit, Mode 3: full RGBW(A)

12 3 45 6

7-10 Mode 4: White-full control, Mode 5: Reduced RGBW(A)

4 3 12 3 6 8 Reserved Mode 6- Reduced RGBW(A)+white control RGBW(A) / RGB modes

Mode/channels 1 2 3 4 5 6 DMX Value

Function

11 1 -11

Red

0 - 255 Red LEDs saturation control (0-100%)

Red Fine

0 - 255 Red LEDs saturation control fine

22 3 -22

Green

0 - 255 Green LEDs saturation control (0-100%)

Green Fine

0 - 255 Green LEDs saturation control fine

33 5 -33

Blue

0 - 255 Blue LEDs saturation control (0-100%)

Blue Fine

0 - 255 Blue LEDs saturation control fine

-44

White (Amber)

0 - 255 White LEDs saturation control (0-100%)

White (Amber) Fine

0 - 255 White LEDs saturation control fine

Green correction

Uncorrected white

1-127 Minus green --> uncorrected white

128 Uncorrected white (128=default)

129-255 Uncorrected white --> Plus green

- - 10 2 - 6

Colour temperature correction (CTC)

No function (0 - default)

1 - 10 Tungsten dimming 2700 K

11 - 20 Tungsten dimming 3200 K

21-255 Colour temperature changing from 1800 K --> 6500 K (21-1800K, 66-2700K, 91-3200K,141-4200K, 211-5600K, 255-

- - 11 3 5 7

6500K)
Dimmer

0 - 255 Light intensity coarse (0-100%)

- - 12 - 6 8

Dimmer Fine

0 - 255 Light intensity fine

Type of control
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
step proportional
step proportional
step step step proportional
proportional
proportional

Page 1

DMX protocol

Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol

Eminere Inground 2/4 - DMX protocol

Eminere Remote 1/2/3/4 - DMX protocol

Version: 3.1 (23 modes in total)

Mode/Channels in all

Mode 11: TW White selection + Dimmer, Mode 12: TW WW + CW

14-16 Mode 13: PW - Dimmer

Reserved

TW and PW modes

Mode/channels

DMX Value

Function

White colour selection

0 - 255 White from 2700 K - 6500 K

Warm White

0 - 255 Warm White LEDs saturation control (0-100%)

Cool White

0 - 255 Cool White LEDs saturation control (0-100%)

Dimmer

0 - 255 Light intensity coarse (0 - 100%)

Dimmer Fine

0 - 255 Light intensity fine

Type of control proportional proportional proportional proportional proportional

Page 2

DMX protocol

Eminere 1/2/3/4 and Eminere Side 1/2/3/4 - DMX protocol

Eminere Inground 2/4 - DMX protocol

Eminere Remote 1/2/3/4 - DMX protocol

Version: 3.1 (23 modes in total)

Mode/Channels in all

Mode 16: RGBW(A) pixels, Mode 17 RGB pixels, Mode 18: TW pixels,

21-23 Mode 19- PW dimmer pixels

Reserved

Pixel modes

Mode/channels

DMX

Value

Function

Type of control

Red 1 -Eminere 1/2/3/4

0 - 255 Red LEDs saturation control (0-100%)

proportional

Green 1-Eminere 1/2/3/4

0 - 255 Green LEDs saturation control (0-100%)

proportional

Blue 1-Eminere 1/2/3/4

0 - 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 1-Eminere 1/2/3/4

0 - 255 White LEDs saturation control (0-100%)

proportional

Red 2 -Eminere 2/3/4

0 - 255 Red LEDs saturation control (0-100%)

proportional

Green 2-Eminere 2/3/4

0 - 255 Green LEDs saturation control (0-100%)

proportional

Blue 2-Eminere 2/3/4

0 - 255 Red LEDs saturation control (0-100%)

proportional

White (Amber) 2-Eminere 2/3/4

0 - 255 White LEDs saturation control (0-100%)

proportional

Red 3-Eminere 3/4

0 - 255 Red LEDs saturation control (0-100%)

proportional

Green 3-Eminere 3/4

0 - 255 Green LEDs saturation control (0-100%)

proportional

Blue 3-Eminere 3/4

0 - 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 3-Eminere 3/4

0 - 255 White LEDs saturation control (0-100%)

proportional

Red 4-Eminere 4

0 - 255 Red LEDs saturation control (0-100%)

proportional

Green 4-Eminere 4

0 - 255 Green LEDs saturation control (0-100%)

proportional

Blue 4-Eminere 4

0 - 255 Blue LEDs saturation control (0-100%)

proportional

White (Amber) 4 -Eminere 4

0 - 255 White LEDs saturation control (0-100%)

proportional

Warm White 1 -Eminere 1/2/3/4

Warm White LEDs saturation control (0-100%)

proportional

Cool White 1-Eminere 1/2/3/4

0 - 255 Cool White LEDs saturation control (0-100%)

proportional

Warm White 2-Eminere 2/3/4

Page 3

DMX protocol

Mode/channels

DMX

Value

Function

0 - 255 Warm White LEDs saturation control (0-100%)

Cool White 2-Eminere 2/3/4

0 - 255 Cool White LEDs saturation control (0-100%)

Warm White 3-Eminere 3/4

0 - 255 Warm White LEDs saturation control (0-100%)

Cool White 3-Eminere 3/4

0 - 255 Cool White LEDs saturation control (0-100%)

Warm White 4 -Eminere 4

0 - 255 Warm White LEDs saturation control (0-100%)

Cool White 4 -Eminere 4

0 - 255 Cool White LEDs saturation control (0-100%)

Dimmer 1

0 - 255 Light intensity coarse (0 - 100%)

Dimmer Fine 1

0 - 255 Light intensity fine

Dimmer 2

0 - 255 Light intensity coarse (0 - 100%)

Dimmer Fine 2

0 - 255 Light intensity fine

Dimmer 3

0 - 255 Light intensity coarse (0 - 100%)

Dimmer Fine 3

0 - 255 Light intensity fine

Dimmer 4

0 - 255 Light intensity coarse (0 - 100%)

Dimmer Fine 4

0 - 255 Light intensity fine

Type of control proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional proportional

Page 4

References

ROBE Uploader | Gadgets & Control

Microsoft: Print To PDF