Daikin Africa General Catalogue
Heat Pump and Cooling Only
Our Promise
Daikin's promise is to ensure customers can depend on Daikin for the ultimate in comfort, allowing them to focus on their working and home lives. This is achieved through dedication to technological excellence, design focus, and the highest quality standards. Daikin is committed to environmental responsibility, with products at the forefront of low energy usage and continuous innovation to reduce the environmental impact of HVACR solutions. With over 90 years of experience, Daikin aims to deliver added value through long-lasting relationships based on trust, respect, and credibility, treating challenges as opportunities for improvement and innovation.
Key Technologies & Benefits
Inverter Technology
Daikin's inverter technology intelligently adjusts power usage to match the actual requirement, providing enhanced comfort and energy efficiency. Unlike traditional on/off systems, inverter units continuously adjust cooling and heating output to maintain a stable room temperature, reaching the desired temperature faster and keeping it constant. This leads to energy consumption reductions of up to 30% compared to traditional systems.
The technology is integrated into the outdoor unit. It gradually increases capacity based on the room's load, akin to a car's accelerator. This contrasts with non-inverter units that operate at full load immediately upon starting.
In Africa, where outside temperatures vary significantly throughout the day and year, inverter technology is crucial for adapting cooling/heating capacity to meet specific, fluctuating requirements.
Diagram Description: A graph illustrates temperature stability and power input over time. The 'Air conditioning with Inverter' line shows a slow start, gradual increase to set temperature, and stable maintenance of temperature with minimal power fluctuations. The 'Air conditioning without Inverter' line shows a start-stop operation with significant temperature swings and high power spikes.
About R-32 Refrigerant
R-32 is a next-generation refrigerant, a pure form of difluoromethane previously used as a component in R-410A blends. It offers significant environmental advantages:
- Lower GWP: R-32 has a Global Warming Potential (GWP) of 675, which is one-third that of R-410A (2,088).
- Zero ODP: It has an Ozone Depletion Potential (ODP) of 0, meaning it does not harm the ozone layer.
- Higher Efficiency: R-32 allows for higher energy efficiency or more compact equipment designs compared to R-410A.
- Easier Recycling: As a single component refrigerant, R-32 is easier to reclaim, recycle, and reuse.
- Installer Friendly: It can be charged in liquid or gas phase, with working pressures similar to R-410A, and avoids fractionation or glide issues.
The potential global warming impact (GWP x charge volume) can be up to 75% less than R-410A, and energy efficiency can improve by 5-10%.
Table Description: A comparison table shows R-22, R-410A, and R-32. Key metrics include Composition, GWP (Global Warming Potential), and ODP (Ozone Depletion Potential). R-32 stands out with a significantly lower GWP and zero ODP.
General Benefits & Features
Daikin products offer a wide range of features designed for comfort, efficiency, and air quality:
- ☀️ Seasonal Efficiency: Provides a realistic indication of efficiency over an entire heating or cooling season.
- ? Auto-cleaning filter: Automatically cleans itself, simplifying maintenance and ensuring optimal energy efficiency and comfort.
- ? Motion Detection Sensor: Detects presence and adjusts operation to energy-efficient settings when rooms are unoccupied.
- ? Night Set Mode: Saves energy by preventing over-cooling or overheating during nighttime.
- ? Econo Mode: Reduces power consumption for other appliances.
- ? Home Leave Operation: Maintains a specific comfort level during absence.
- ? Fan Only: Allows use as a fan without cooling or heating.
- ❄️ Free Cooling: Utilizes low external air temperatures to cool water, reducing compressor load and operating costs.
- ?️ Floor & Presence Sensor: Directs airflow away from detected persons and ensures even temperature distribution.
- ☁️ Comfort Mode: Automatically adjusts airflow direction (upwards in cooling, downwards in heating) to prevent drafts and ensure comfort.
- ⚡ Powerful Mode: Quickly cools or heats the room.
- ? Whisper Quiet: Indoor and outdoor units operate at very low sound levels.
- ? Humidity Control: Reduces indoor humidity without affecting room temperature.
- ✨ Flash Streamer: Generates high-speed electrons to break down viruses, bacteria, odors, and allergens.
- ? Weekly Timer: Allows scheduling operations on a daily or weekly basis.
- ? Online Controller: Control units remotely via a smartphone app (optional WLAN adapter).
- ? Auto-restart: Unit restarts with original settings after a power failure.
- ⚙️ Self-diagnosis: Simplifies maintenance by indicating system faults.
- Scroll Compressor: Known for reliability and high efficiency.
- Centrifugal Compressor: Uses impeller and volute for energy conversion, often with VFD for part-load performance.
- Swing Compressor: Fewer moving parts, low vibration, higher reliability.
- Screw Compressor: Designed for high capacities with stepless capacity control.
- Reciprocating Compressor: Uses piston movement for compression.
- Guaranteed Operation: Down to -20°C or -25°C for heat pumps, suitable for severe winter conditions.
HEAT PUMP SYSTEMS
Split Systems
Daikin offers a range of split heat pump solutions for various home and project needs, ensuring comfort all year round. These systems are designed for average and cold outdoor temperatures and feature advanced technologies.
Key Features of Split Systems:
- Intelligent Sensors: Detect room surface temperature and presence to optimize airflow and energy efficiency.
- Advanced Air Treatment: Includes Flash Streamer technology for air purification and auto-cleaning filters.
- Connectivity: WLAN enabled for Daikin Online Controller app.
- Reliability: Enhanced features for operation in low temperatures (down to -25°C), including larger compressors and fewer defrost cycles.
- Iconic Designs: Award-winning designs like Daikin Emura, Stylish, and Ururu Sarara.
Ururu Sarara: The Ultimate Comfort Solution
This range provides five air treatment techniques for total comfort: heating/cooling, humidification (Ururu), dehumidification (Sarara), ventilation, and air purification. It achieves A+++ energy ratings and won the Red Dot design award.
FTXZ-N + RXZ-N (Wall mounted unit)
Offers complete climate control with humidification, dehumidification, air purification, and ventilation, achieving A+++ efficiencies. Features include 3D air flow, self-cleaning filters, and optional online control.
Specification | FTXZ + RXZ |
---|---|
Cooling capacity (Min./Nom./Max.) | kW |
Heating capacity (Min./Nom./Max.) | kW |
Power input (Cooling/Heating) | kW |
Space cooling (Pdesign) | kW |
Space heating (Average climate, Pdesign) | kW |
SEER | |
SCOP/A | |
Annual energy consumption (Cooling/Heating) | kWh/a |
EER/COP | |
Energy labeling (Cooling/Heating) | A+++/A+++ |
Indoor unit Dimensions (HxWxD) | mm |
Indoor unit Weight | kg |
Outdoor unit Dimensions (HxWxD) | mm |
Outdoor unit Weight | kg |
Operation range (Cooling/Heating Ambient) | °CDB / °CWB |
Refrigerant Type/GWP | R-32 / 675 |
Piping connections (Liquid/Gas OD) | mm |
Max Piping length (OU-IU / IU-OU) | m |
Stylish FTXA-A (Wall mounted unit)
Features an intelligent thermal sensor, 2-area motion detection, 3D air flow, and fireplace logic. Available in four colors: white, silver, black, and blackwood. Award-winning design.
Specification | FTXA + RXA |
---|---|
Cooling capacity (Min./Nom./Max.) | kW |
Heating capacity (Min./Nom./Max.) | kW |
Power input (Cooling/Heating) | kW |
Space cooling (Pdesign) | kW |
Space heating (Average climate, Pdesign) | kW |
SEER | |
SCOP/A | |
Annual energy consumption (Cooling/Heating) | kWh/a |
EER/COP | |
Energy labeling (Cooling/Heating) | A+++/A+++ |
Indoor unit Dimensions (HxWxD) | mm |
Indoor unit Weight | kg |
Outdoor unit Dimensions (HxWxD) | mm |
Outdoor unit Weight | kg |
Operation range (Cooling/Heating Ambient) | °CDB / °CWB |
Refrigerant Type/GWP | R-32 / 675 |
Piping connections (Liquid/Gas OD) | mm |
Max Piping length (OU-IU / IU-OU) | m |
Daikin Emura (Wall mounted unit)
Combines iconic design with advanced technology for optimal comfort and energy saving. Features include 2-area motion detection, whisper quiet operation, and online controller. Achieves A+++ SEER and A++ SCOP ratings. Available in matt crystal white and silver.
Specification | FTXJ + RXJ |
---|---|
Cooling capacity (Nom.) | kW |
Heating capacity (Nom.) | kW |
Power input (Cooling/Heating) | kW |
Space cooling (Pdesign) | kW |
Space heating (Average climate, Pdesign) | kW |
SEER | |
SCOP/A | |
Annual energy consumption (Cooling/Heating) | kWh/a |
EER/COP | |
Energy labeling (Cooling/Heating) | A+++/A++ |
Indoor unit Dimensions (HxWxD) | mm |
Indoor unit Weight | kg |
Outdoor unit Dimensions (HxWxD) | mm |
Outdoor unit Weight | kg |
Operation range (Cooling/Heating Ambient) | °CDB / °CWB |
Refrigerant Type/GWP | R-32 / 675 |
Piping connections (Liquid/Gas OD) | mm |
Max Piping length (OU-IU / IU-OU) | m |
FTXM-N + RXM-N(9) (Wall mounted unit)
Offers attractive design, perfect indoor air quality with Flash Streamer technology, and quiet operation. Features include intelligent sensors and online controller connectivity. Achieves up to A+++ in cooling and heating.
FTXF-B/A + RXF-A/B (Wall mounted unit)
Designed for low energy consumption and pleasant comfort, achieving up to A++ in cooling. Features optional online controller.
GTHT-TV + RHTG-TV (Heat Pump Unit)
New R-32 heat pump unit with Daikin inverter swing compressor, designed for African and Near Eastern markets. Features a built-in stabilizer (160-265V) and reinforced casing for durability.
Specification | GTHT + RHTG |
---|---|
Cooling capacity (Nom.) | Btu/h / kW |
Heating capacity (Nom.) | Btu/h / kW |
Power input (Cooling/Heating) | kW |
EER/COP | W/W |
Indoor unit Dimensions (HxWxD) | mm |
Indoor unit Weight | kg |
Indoor unit Fan rate (Cooling H/M/L/SL) | cfm |
Indoor unit Sound pressure level | dBA |
Outdoor unit Dimensions (HxWxD) | mm |
Outdoor unit Weight | kg |
Outdoor unit Sound pressure level (High) | dBA |
Operation range (Cooling/Heating Ambient) | °CDB / °CWB |
Refrigerant Type | R-32 |
Piping connections (Liquid/Gas OD) | mm |
Max Piping length (Total / Chargeless) | m |
Max Elevation | m |
Power supply (Voltage range) | V/Ph/Hz |
FTXN-JXV1 + RXN-CXV1 (Wall Mounted - Cooling and Heating)
Provides nominal cooling and heating capacities, EER, COP, and detailed specifications for indoor and outdoor units including power supply, airflow, sound pressure, dimensions, weight, and pipe connections.
Specification | FTXN + RXN |
---|---|
Nominal Cooling Capacity (min-max) | Btu/hr w |
Nominal Heating Capacity (min-max) | Btu/hr w |
Nominal EER | W/W |
Nominal COP | W/W |
Indoor Unit Power Supply | V//Hz |
Air Flow | CFM |
Sound Pressure Level | dBA |
Dimension (HxWxD) | mm |
Net Weight | kg |
Outdoor Unit Power Supply | V//Hz |
Sound Pressure Level | dBA |
Dimension (HxWxD) | mm |
Net Weight | kg |
Pipe Connection - Liquid | mm |
Pipe Connection - Gas | mm |
Max. Piping Length | m |
Max. Elevation | m |
FTYN-PXV1 + RYN-CJXV1
Details nominal cooling and heating capacities, EER, COP, and unit specifications for indoor and outdoor units, including power supply, airflow, sound pressure, dimensions, weight, and pipe connections.
Specification | FTYN + RYN |
---|---|
Nominal Cooling Capacity | Btu/h w |
Nominal Heating Capacity | Btu/h w |
Nominal EER | W/W |
Nominal COP | W/W |
Indoor unit Power Supply | V/Ph/Hz |
Air Flow | CFM |
Sound Pressure Level | dBA |
Height | mm |
Width | mm |
Depth | mm |
Net Weight | kg |
Outdoor unit Power Supply | V/Ph/Hz |
Sound Pressure Level | dBA |
Height | mm |
Width | mm |
Depth | mm |
Net Weight | kg |
Pipe connection - Liquid | mm |
Pipe connection - Gas | mm |
Max. Piping Length | m |
Max. Elevation | m |
Multi Split System
25 /4 /3 /MXM-M( 9)/N
Offers multi-model application, allowing connection of up to 5 indoor units (even different capacities) to a single outdoor unit. All indoor units can operate individually within the same mode. Features include high energy efficiency (up to A+++ in cooling, A++ in heating) and a swing compressor for low noise and high efficiency.
Various indoor unit types can be connected, including wall-mounted, ceiling cassette, concealed ceiling, and floor standing units.
Specification | Outdoor unit |
---|---|
Dimensions (HxWxD) | mm |
Weight | kg |
Sound power level (Cooling/Heating) | dBA |
Sound pressure level (Cooling/Heating Nom./High) | dBA |
Operation range (Cooling/Heating Ambient) | °CDB / °CWB |
Refrigerant Type/GWP | R-32 / 675 |
Charge | kg/m |
Piping connections (Liquid/Gas OD) | mm |
Max Piping length (OU-IU / IU-OU) | m |
Power supply (Phase/Frequency/Voltage) | Hz/V |
Maximum fuse amps (MFA) | A |
Sky Air Series
The Sky Air range is designed for the light commercial sector, offering future-proofed, best-in-class climate control with high energy efficiency (up to A++), superior aesthetics, and market-leading controls.
Key Sky Air Features:
- High Energy Efficiency: SEER up to A++ and SCOP up to A++.
- Best Comfort: Variable Refrigerant Temperature prevents cold draughts; low sound levels for indoor and outdoor units.
- Top Reliability: Extensive testing, refrigerant-cooled PCB, and a wide support network.
- Market Leading Controls: Remote connectivity, intuitive app control, Daikin Cloud Service.
- Superior Aesthetics: Sleek designer panels and fully flat ceiling units.
- Unique Installation Benefits: Low-height casings, plug & play solutions.
- Auto Cleaning Technology: Reduces running costs and maintenance by automatically cleaning filters.
Specific Sky Air Models:
- FDXM-F9 + RXM-N9 (Slim concealed ceiling unit): Compact, invisible unit ideal for small retail, offices, and residential applications. Features auto-cleaning filter option and multi-zoning capability.
- FDXM-F9 + RZAG-A (Slim concealed ceiling unit): Combines with Sky Air Alpha-series for high efficiency and performance. Features auto-cleaning filter and multi-zoning.
- FBA-A(9) + RXM-N9 (Concealed ceiling unit with medium ESP): Slimmest and most powerful medium static pressure unit. Offers optimized supply air volume adjustment and flexible installation.
- FBA-A(9) + RZAG-A / NV1 / NY1 (Concealed ceiling unit with medium ESP): Combines with Sky Air Alpha-series for high efficiency. Features flexible installation and optimized supply air volume.
- FBA-A(9) + RZASG-MV1/MY1 (Concealed ceiling unit with medium ESP): Combines with Sky Air Advance-series for value. Features optimized supply air volume and flexible installation.
- FCAG-B + RXM-N9 (Split): Features optional automatic filter cleaning, intelligent sensors, and individual flap control for room layout flexibility.
- FCAG-B + RZAG-A / NV1 / NY1 (Split): Combines with Sky Air Alpha-series for high efficiency. Features optional auto-cleaning panel and individual flap control.
- FCAG-B + RZASG-MV1 / MY1 (Split): Combines with Sky Air Advance-series for value. Features optional auto-cleaning panel and individual flap control.
- FFA-A9 + RXM-N9 (Split): Unique fully flat integration into ceiling tiles. Features iconic design, intelligent sensors, and individual flap control.
- FFA-A9 + RZAG-A (Split): Combines with Sky Air Alpha-series for high efficiency. Features fully flat integration and individual flap control.
- FAA-A + RZASG-MV1/MY1 (Wall mounted unit): For rooms without false ceilings or free floor space. Features a flat, stylish front panel and comfortable air spread.
- FHA-A(9) + RXM-N9 (Wall mounted unit): For wide rooms. Features Coanda effect for comfortable airflow and easy installation.
- FHA-A(9) + RZAG-A / NV1 / NY1 (Ceiling suspended unit): For wide rooms. Features Coanda effect and reduced energy consumption.
- FHA-A(9) + RZASG-MV1/MY1 (Ceiling suspended unit): Combines with Sky Air Advance-series. Features Coanda effect and reduced energy consumption.
- FVA-A + RZASG-MV1/MY1 (Floor standing unit): For commercial spaces with high ceilings. Features automatic fan speed adjustment and improved airflow distribution.
- FNA-A9 + RZAG-A (Concealed in walls): Designed for discreet concealment in walls, offering high ESP for flexible installation.
- FDMQ Series (Ceiling Concealed): Offers excellent air distribution, auto-restart, double drainage, and self-diagnosis features.
- FDMQN-C + RYN/RQ-CG (Ceiling Concealed C Series): Standard static, cooling and heating. Features excellent air distribution, auto-restart, double drainage, and self-diagnosis.
- FFQN-C + RYN-CG (Ceiling Cassette C Series): 2x2 panel, cooling and heating. Features 4-way air discharge, compact design, built-in drain pump, and stylish panel.
- FCQN-E + RYN/RQ-CG (Ceiling Cassette E Series): 3x3 panel, cooling and heating. Features optimum air discharge, modern panel, superior sound level, and multi-comfort air swing.
- FLQN-E + RYN/RQ-CG / FHQN-C +RQ-D (Ceiling Convertible E Series): Ceiling and floor installation options, automatic air swing, flexible installation, and better serviceability.
- FVQN-A + RQ-C/D(G) (Floor Standing A Series): Stylish profile, dual control, long air throw, and keylock function.
Rooftops Series
Daikin rooftops series offer high installation flexibility, easy servicing, and a compact design. They are ErP compliant and come with a warranty.
Key Rooftop Features:
- Easy Installation: 'Plug and play' concept with pre-connected indoor and outdoor sides.
- High Efficiency: Reliable scroll compressors and integrated high-efficiency EC plug fans.
- Advanced Controls: Latest pCO controller, integration with Daikin Intelligent Touch Manager and third-party BMS via optional BACnet protocol.
- Air Quality: Standard clogged filter alarm and hydrophilic coated fins.
UATYQ-ABAY1 (High installation flexibility and easy servicing)
Features 'plug and play' installation, scroll compressor, factory pre-charged refrigerant, and options for free cooling and improved air quality. Available in 2-damper and 3-damper versions with thermodynamic heat recovery.
Specification | UATYQ-ABAY1 |
---|---|
Cooling capacity (Nom.) | kW |
Heating capacity (Nom.) | kW |
Power input (Cooling/Heating Nom.) | kW |
EER/COP | |
Evaporator Fan (Air flow / External static pressure) | m³/h / Pa |
Air discharge direction | Frontal, Left, Rear |
Air intake direction | Frontal, Left, Right, Bottom / Rear, Right, Left |
Refrigerant Type / GWP | |
Charge | |
Dimensions (HxWxD) | mm |
Weight | kg |
Operation range (Cooling/Heating) | °CDB / °CWB |
Power supply (Voltage / Phase / Frequency) | V / Hz |
Current (Recommended fuses) | A |
UATYQ-CY1 (Rooftop)
Offers 'plug and play' installation, scroll compressor, wide operating range, and flat top design. Features convertible return and supply air, and optional economiser for free cooling and fresh air intake.
UATYP-AY1(B) (Rooftop)
Similar to UATYQ-CY1 with 'plug and play' installation, scroll compressor, and flat top design. Features anti-corrosion treated coils.
FDYP-RCYP (Ducted Split E Series)
Wide product range with modular combination options. Features convertible air discharge and options for single or multi-condenser systems.
VRV SYSTEMS
Daikin's VRV (Variable Refrigerant Volume) systems set the standard for climate control, offering market-leading flexibility, sustainability, and comfort.
Key VRV Advantages:
- Top Sustainability: Reduced CO2 equivalent with R-32 refrigerant and lower charge; circular economy for refrigerants.
- Market-Leading Flexibility: Wide range of indoor units, new 10 class indoor unit, and compatibility with R-410A systems.
- Comfort: Variable Refrigerant Temperature prevents cold draughts; true continuous heating during defrost; presence and floor sensors.
- Reliability: Refrigerant-cooled PCB, extensive testing, wide sales network, and auto-cleaning filters.
- Design: Widest range of cassette panels, sleek designer panels, and fully flat cassette options.
- Controls: Madoka wired controller, Intelligent Touch Manager, integration with third-party BMS, and Daikin Cloud Service.
- Installation: Automatic refrigerant charge, VRV configurator software, and outdoor unit display for easy settings and error readouts.
- Innovation: Market leader since 1982, over 90 years of heat pump expertise.
VRV Product Lines:
- RYYQ-U / RXYQ-U (VRV IV+ heat pump): Optimum solution with accurate temperature control, ventilation, hot water, and air handling units. Wide range of indoor units, including Daikin Emura and Nexura. Features VRV IV standards like Variable Refrigerant Temperature and auto-restart.
- REYQ-U (VRV IV+ heat recovery): Best efficiency and comfort solution with integrated heat recovery for simultaneous cooling and heating, providing 'free' heating and hot water.
- RXYSQ-TV9 / TY9 / TY1 (VRV IV S-series heat pump): Space-saving trunk design for flexible installation, ideal for buildings with space limitations. Covers all thermal needs and incorporates VRV IV standards.
- RWEYQ-T9 (VRV IV water cooled+ series): Ideal for high-rise buildings using water as a heat source. Environmentally conscious with reduced CO2 emissions and unique zero heat dissipation principle.
- SB.RKXYQ-T(8) (VRV IV heat pump for indoor installation): The 'invisible VRV' with a unique split design (heat exchanger and compressor units) for flexible installation and seamless integration. Highly suited for densely populated areas.
VRV Indoor Units Overview:
Daikin offers a comprehensive range of indoor units for VRV systems, including:
- Ceiling mounted cassette (FXFQ-B, FXZQ-A, FXCQ-A, FXKQ-MA)
- Slim concealed ceiling unit (FXDQ-A3)
- Concealed ceiling unit with medium ESP (FXSQ-A)
- Concealed ceiling unit with high ESP (FXMQ-P7 / FXMQ-MB)
- Wall mounted unit (FXAQ-A)
- Ceiling suspended unit (FXHQ-A)
- 4-way blow ceiling suspended unit (FXUQ-A)
- Concealed in walls (FXNQ-A)
- Floor standing unit (FXLQ-P)
Each unit type offers specific benefits regarding design, installation flexibility, and performance, with many featuring auto-cleaning filters, multi-zoning options, and energy-saving technologies.
CONTROL SYSTEMS
Individual Control Systems
Daikin provides a variety of control systems for individual unit management, from basic infrared remotes to advanced online controllers.
- Madoka: User-friendly wired remote controller with a premium design, intuitive touch-button control, and multiple color options. Features include scheduling, energy saving functions, and smartphone integration via Madoka Assistant.
- Madoka Assistant: Simplifies advanced settings like schedules and setpoint limitations via Bluetooth low energy.
- BRC1H519 Series: Madoka wired remote controllers for Sky Air and VRV systems, offering sleek design, intuitive control, and hotel application features like key card integration.
- Multi Zoning Kits: Controllers for systems like AZCE6BLUEFACECB, AZCE6THINKRB, AZCE6LITERB, enabling room-by-room climate control via motorized dampers and individual thermostats.
- ARCWLA / ARCWB: Controllers for Siesta Sky Air units, offering ON/OFF, temperature setting, fan speed selection, and timer functions.
- EKRUCBL/EKRUCBS/EKRUDAS: Wired remote controls for heating, cooling, and domestic hot water, supporting multiple languages.
- BRC073: Wired remote control for residential use, featuring energy-saving functions, scheduling, and multiple language support.
- Infrared Remote Control (ARC4*/BRC4*/BRC7*): Standard remote controls with basic functions like ON/OFF, mode selection, and temperature setting.
- Online Controller (BRP069B4145/42, BRP069A6182/81/62): Allows remote control and monitoring of heating systems or up to 50 split air conditioning units via a smartphone app. Features include status monitoring, energy consumption graphs, scheduling, and third-party product integration via IFTTT.
Centralised Control Systems
Centralised control systems manage multiple indoor units or zones efficiently, ideal for commercial buildings.
- DCS302C51: Centralised remote control for up to 64 groups (128 indoor units) with zone and group control, malfunction code display, and expanded timer functions.
- DST301B51: Schedule timer for programming 64 groups with 8 types of weekly schedules.
- DCS301B51: Centralised remote control for 16 groups (128 indoor units) with simultaneous and individual control.
- DTA113B51: Basic solution for control of Sky Air and VRV systems, supporting rotation and backup operation functions.
- DCS601C51: Detailed monitoring and operation of VRV systems (max. 64 indoor unit groups) with a touch panel, GUI visualization, and open interface for third-party integration.
- DCC601A51 (Tablet): Advanced centralised controller offering local or cloud-based control for small commercial buildings, with intuitive interfaces and energy consumption monitoring.
- DCM601A51 (Mini BMS): Price-competitive mini BMS with cross-pillar integration of Daikin products and third-party equipment.
- ITM (Intelligent Touch Manager): Provides full control of Daikin HVAC-R portfolio, integrating third-party equipment via BACnet/IP, DALI, or HTTP interfaces. Supports up to 512 indoor unit groups.
SUSTAINABILITY
Daikin for Sustainability
Daikin is committed to reducing its environmental footprint, aiming for CO2 neutrality by 2050. This is driven by a circular economy, innovation, and smart use of energy.
- Circular Economy: Embracing Certified Reclaimed Refrigerant Allocation for refrigerant reuse, increasing recovered refrigerant returns, and using a refrigerant recycling machine.
- Innovation: Offering high real-world seasonal efficiencies and deploying unique auto-cleaning filters.
- Smart Use: Rigorous energy consumption monitoring via Daikin Cloud Service, expert advice for system optimization, predictive maintenance, and energy waste prevention through smart key cards and sensors.