IKEA IVAR Furniture System Assembly Instructions
Product Name: IVAR
Brand: IKEA
Important Safety Information: Preventing Tip-Over
⚠️WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screws and wall plugs for the wall are not included. Use screws and wall plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
Parts and Tools
Before starting, identify all parts and hardware. Ensure you have the necessary tools.
Hardware Included:
- 100214: Wooden Dowels - 12x
- 101350: Wooden Dowels - 8x
- 101532: Wooden Dowels - 8x
- 100344: Screws (for hinges to doors) - 16x
- 100404: Screws (for frame) - 4x
- 109560: Screws (for hinge plates) - 6x
- 108458: Screws (for wall brackets) - 2x
- 100101: Allen Key - 1x
- 109336: Hinge Assemblies - 4x
- 103887: Hinge Plates - 6x
- 109220: Hinge Mounting Plates - 4x
- 10078170: Hinge Cover Plates - 4x
- 102646: Wall Attachment Brackets - 2x
Note: Screws and wall plugs for securing the furniture to the wall are NOT included. Purchase these separately, ensuring they are suitable for your specific wall type.
Tools Required (Not Included):
- Screwdriver (Phillips head)
- Hammer (for dowels, if needed)
- Drill (for wall mounting)
Cabinet Module Assembly
This section details the assembly of the cabinet module, which includes doors.
Step 1: Prepare Side Panels
Insert wooden dowels (101350, 8x) into the pre-drilled holes on the edges of the two side panels.
Step 2: Attach Base and Top Panels
Connect the side panels to the base panel and the top panel. Use the Allen key (100101) and screws (100404, 4x) to secure the frame.
Step 3: Insert Back Panel
Slide the back panel into the grooves on the rear of the assembled cabinet frame.
Step 4: Attach Hinge Mounting Plates
Attach the hinge mounting plates (109220, 4x) to the inside of the cabinet frame using screws (100344, 4x).
Door Assembly and Attachment
This section covers attaching the doors to the cabinet module.
Step 1: Attach Hinges to Doors
Attach the hinge assemblies (109336, 4x) to the inside of the two doors using screws (100344, 16x). Ensure the hinge plates (103887, 4x) are correctly oriented.
Step 2: Mount Doors to Cabinet
Clip the hinge assemblies on the doors onto the hinge mounting plates (109220) attached to the cabinet frame.
Step 3: Attach Hinge Cover Plates
Snap the hinge cover plates (10078170, 4x) onto the hinge assemblies.
Step 4: Adjust Doors
Use the adjustment screws on the hinges to align the doors. Adjustments can be made for height, depth, and side-to-side positioning to ensure the doors close properly and are evenly spaced.
Shelving Unit Assembly
This section details the assembly of the open shelving unit and its wall attachment.
Step 1: Assemble Frame
Connect the vertical side panels to the base panel. Use wooden dowels (100214, 12x) and screws (100404, 4x).
Step 2: Attach Shelves
Insert the shelves into the pre-drilled holes or slots on the side panels. Use wooden dowels (101532, 8x) to secure the shelves.
Step 3: Attach Top Panel
Attach the top panel to the side panels using wooden dowels (101350, 8x) and screws (100404, 4x).
Step 4: Attach Wall Brackets
Attach the wall attachment brackets (102646, 2x) to the top rear of the shelving unit using screws (108458, 2x).
Securing Furniture to the Wall
This is a critical safety step. To prevent furniture tip-over, it MUST be secured to the wall.
Use the provided wall attachment brackets (102646) and appropriate screws and wall plugs (not included) suitable for your wall type.
Align the unit with the desired wall location. Mark the positions for the wall brackets. Drill holes in the wall, insert wall plugs if needed, and then securely fasten the unit to the wall using the brackets and your chosen screws.
?Professional Advice: If you are unsure about the correct type of screws, wall plugs, or the mounting process for your specific walls, please consult a qualified professional.
