FSP Technical Datasheet
270W Adapter
FSP270-AxAN3
Features
- Certified IEC 62368-1 & CB 60950-1
- Meets USA EISA 2007 standards
- Meets Energy Efficiency DOE Level VI
- Meets Code of Conduct Version 5 Tier 2
- High Reliability
- Low Profile
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
- With PFC Circuit
Safety Standard Approvals
CULUS LISTED I.T.E. POWER SUPPLY E190414, TÜVRheinland ZERTIFIZIERT, CE, FCC Tested to Comply With FCC Standards FOR HOME OR OFFICE USE.
Description
This product is a 240~270 watt AC to DC adapter designed for IPC systems, embedded systems, printers, monitors, charging systems, and POS systems requiring high wattage demands. It operates at 90 to 264 VAC input voltage. The unit meets CISPR32 EN55032 CLASS B, EN55024, and FCC PART 15B Class B emission limits, and is designed for ITE applications.
Input Specifications
| Parameter | Value |
|---|---|
| Input voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input current | 100Vac, 240Vac / full load ≤ 1.2A |
| No load power consumption | 115Vac, 230Vac ≤ 0.5W |
| Touch current | 264Vac/50Hz ≤ 0.25mA |
| Power factor | 115Vac, 230Vac / full load ≥ 0.9 (Provisions for adding harmonic reduction per EN 61000-3-2 must be present) |
| Efficiency | See rating chart (DOE Level VI ≥88%, CoC V5 (Tier 2) ≥89%) |
| Power turn-on time | At 100Vac / full load, output voltage shall remain regulation ≤ 3Sec |
| Hold-up time | At 100Vac or 240Vac / full load, output voltage shall remain regulation ≥ 10ms |
| Inrush current | 100Vac, 240Vac / full load: Shall be less than the rating of adapter critical component (including rectifiers, fuse, surge and current limiting device) |
| Operating altitude | 5000 meters above sea level |
| Withstand voltage | Between AC input and secondary applied DC 4242V, test time 1 minute, cut off current shall be less than 10mA |
| MTBF | 100Vac, 240Vac / full load, 300,000 hours at 25°C, standard SR332 |
Output Specifications
| Parameter | Details |
|---|---|
| Output voltage/current | See rating chart |
| Total output power | See rating chart |
| Protection: Over voltage | The adapter will enter into shut down if over voltage happens at the output terminal due to an internal fault. The output trip voltage shall not exceed 29/37* volts. Normal state is restored by AC reset. |
| Protection: Short circuit & Over current | When an internal or external fault occurs (overload or short circuit), the power supply shall shut down and enter auto-recovery mode. |
| Protection: Over temperature | The power supply will enter into shut down during abnormal thermal rise. Normal state is restored by AC reset. |
| Protection: Brown-out | Set at 60Vac~70Vac |
| Environment: Working TEMP. | 0~70°C (derating above 40°C) |
| Environment: Storage TEMP. | -20~+80°C |
| Environment: Working Humidity | 20~80% RH non-condensing |
| Environment: Storage Humidity | 10~90% RH non-condensing |
EMC Performance
| Standard | Performance |
|---|---|
| EN55032 | Class B conducted, class B radiated |
| FCC | Class B conducted, class B radiated |
| VCCI | Class B conducted, class B radiated |
| EN61000-3-2 | Meets class D |
| EN61000-3-3 | Meets regulation |
| EN61000-4-2 | Air discharge: ±15 KV, contact discharge: ±8KV, meets criterion A |
| EN61000-4-3 | 80~1000 MHz, 3V/m, 80% AM(1kHz), meets criterion A |
| EN61000-4-4 | Impulse: ±1kV applied to L,N, meets criterion A |
| EN61000-4-5 | ±1kV applied differential mode, meets criterion A; ±2kV applied common mode, meets criterion A |
| EN61000-4-6 | 0.15~80 MHz, 3Vrms, 80% AM(1kHz), meets criterion A |
| EN61000-4-8 | 50 Hz or 60Hz, 1A/m, meets criterion A |
| EN61000-4-11: Voltage Dips | >95% reduction for 0.5 period, meets criterion A |
| EN61000-4-11: Voltage Interruptions | 30% reduction for 25 period, meets criterion B; >95% reduction for 250 period, meets criterion B |
Derating Curves
Input Voltage Derating Curve: This graph illustrates the relationship between input voltage and output power capacity. It shows that the adapter maintains 100% output power across the input voltage range of 90 VAC to 264 VAC.
Output Power Derating Curve: This graph depicts the output power percentage relative to ambient temperature. The adapter operates at 100% output power from 0°C to 40°C. Above 40°C, output power is derated linearly, reaching 50% at 70°C.
Power de-rating: For operation between 0°C to 40°C at 100% load, 50°C at 80% load, 60°C at 60% load, and 70°C at 50% load. This derating must be less than the rating of the adapter's critical components, following FSP specifications.
Output Voltage/Current Rating Chart
| Model | Output Voltage | Output Current | Wattage | AC Inlet | Efficiency (DOE Level VI) | Efficiency (CoC V5 Tier 2) |
|---|---|---|---|---|---|---|
| FSP270-RHAN3 | 12V | 20A | 240W | C14 | ≥89% | ≥89% |
| FSP270-RBAN3 | 19V | 14.21A | 270W | C14 | ≥88% | ≥89% |
| FSP270-RAAN3 | 24V | 11.25A | 270W | C14 | ≥88% | ≥89% |
| FSP270-RFAN3 | 48V | 5.62A | 270W | C14 | ≥88% | ≥89% |
| FSP270-RWAN3 | 54V | 5A | 270W | C14 | ≥88% | ≥89% |
Mechanical Specifications
The adapter has a low-profile design. Key dimensions are approximately 87.6 mm (length) x 41.5 mm (width) x 21.0 mm (height). The unit includes a rating label and a power indicator (blue color).
Connector: The DC output connector is a DIN plug. The AC input connector is a C14 type.
Cable: The DC output cable is UL11353 12AWG BLACK, 1200±30 mm in length, secured with a steel wire cable tie (PVC plated).
Connector Specifications
DIN Plug Pinout:
| PIN | Polarity | COLOR |
|---|---|---|
| PIN 1 | V0(+) | WHITE |
| PIN 2 | V0(+) | WHITE |
| PIN 3 | V0(+) | WHITE |
| PIN 4 | ||
| PIN 5 | GND(-) | BLACK |
| PIN 6 | GND(-) | BLACK |
Housing: JWT C4202H00-2X3P or equivalent.
Cable Tie: Steel wire, PVC plated.
Dimensions: Various dimensions are specified for connector housing, cable lengths, and heat shrink tubing, indicating precise assembly requirements.
Related Documents
 |
FSP270-RXAN3 Series 270W AC-DC Adapter Datasheet | FSP Group Technical datasheet for the FSP270-RXAN3 series 270W AC-DC adapters from FSP Group. Details features, specifications, safety approvals, and mechanical dimensions for ITE applications. |
 |
FSP Switching Power Adapter CB Test Certificate Official CB Test Certificate for FSP Switching Power Adapters, including models FSP270-RHAN3, FSP270-RWAN3, FSP270-RFAN3, FSP270-R01, FSP270-RBAN3, FSP270-RAAN3, confirming compliance with IEC 62368-1:2018. Issued by TÜV Rheinland Japan Ltd. |
 |
FSP Switching Power Adapter CB Test Certificate - Models FSP270 Series Official CB Test Certificate for FSP Switching Power Adapters, including models FSP270-RHAN3, FSP270-RWAN3, FSP270-RFAN3, FSP270-R01, FSP270-RBAN3, FSP270-RAAN3, compliant with IEC 62368-1. |
 |
FSP Switching Power Adapter CB Test Certificates and Safety Certificate Official CB Test Certificates and FSP's internal safety certificate for FSP Switching Power Adapters, detailing product specifications, safety standards, and manufacturing locations. |
 |
FSP Switching Power Adapter Declaration of Conformity - FSP270 Series Official Declaration of Conformity for FSP Group Inc. Switching Power Adapters, including models FSP270-RHAN3, FSP270-RBAN3, FSP270-RFAN3, FSP270-R WAN3, FSP270-RAAN3, and FSP270-R01, compliant with UKCA regulations. |
 |
FSP Group Inc. CE Declaration of Conformity for Switching Power Adapters Official CE Declaration of Conformity from FSP Group Inc. for their FSP270 series Switching Power Adapters, detailing compliance with relevant EU directives and international standards including IEC 62368-1, EN 55032, and EN 55035. |
 |
TÜV Rheinland Safety Certification for FSP Switching Power Adapters Official TÜV Rheinland safety certifications for FSP Group Inc. switching power adapters, detailing product models, technical specifications, compliance standards (EN 62368), validity periods, and manufacturing locations. |
 |
FSP Switching Power Adapter Safety Certificate and Compliance Details Official safety certificate for FSP Group Inc. switching power adapters, detailing model numbers, TÜV/GS and EN IEC 62368-1 compliance, validity, and manufacturing locations. |