WARRANTY DATE CODE REFERENCE GUIDE
LANDSCAPE IRRIGATION | Built on Innovation®
Website: hunterirrigation.com
Statement of Warranty
Hunter Industries Incorporated (“Hunter”) warrants the following products to be free of defects in materials or workmanship under normal use in landscape irrigation applications for the specified period of time outlined below from the original date of manufacture:
| Warranty Period | Category | Products |
|---|---|---|
| ONE YEAR | ROTORS | SRM |
| MICRO | Micro Sprays, PLD Fittings, Rigid Risers, Air/Vacuum Relief Valves | |
| TWO YEARS | ROTORS | PGP-ADJ, PGJ |
| CONTROLLERS | ACC (Legacy), BTT, FS-1000, FS-3000, I-Core/DUAL (Legacy), NODE, NODE-BT, Pro-C, PSR, ROAM, XC Hybrid, X-Core, WVL, WVOM, RPT, Hydrawise Controllers (HC, X2, WAND, PHC, HPC, HCC) | |
| SPRAYS NOZZLES | PS Ultra, SJ, FlexSG, HSBE, MP Rotator Stake Kit Spray Nozzles, PCN, PCB, AFB, MSBN | |
| MICRO | HC Flow Meter (wired and wireless) | |
| ACZ, PCZ, RZWS, Point-Source Emitters, Tubing, Multi-Port Emitters, IH Risers, MLD, Eco-Indicator***, Multi-Purpose Box, Senninger Regulators, PLD-LOC Fittings | ||
| VALVES CENTRAL**** | All central communication modules (cell, LAN, Wi-Fi, and automation field servers), Hunter 360 Software, Weather Stations | |
| TOOLS | SpotShot | |
| THREE YEARS | MP ROTATOR | All Nozzles |
| FIVE YEARS | ROTORS | PGP Ultra, I-20, I-25, I-40, I-80, I-90, ST-1600, ST-1700-V |
| SPRAYS | Pro-Spray, Pro-Spray PRS30, Pro-Spray PRS40 | |
| VALVES | ICV, IBV, HQ, Accu Sync | |
| CONTROLLERS | ACC2, ICC2, ICD Decoders, ICD-HP Programmer | |
| SENSORS | Clik Sensors, Flow-Sync, MWS, Solar Sync, Wireless Flow Sensor | |
| MICRO | ICZ, IBZ, HDL**, HDL-COP**, Eco-Mat, Eco-Wrap, Eco-Indicator*** |
** Plus 2 additional years for environmental stress cracking. No warranty against root intrusion on HDL-COP. While the use of copper does not completely remove the chance of root intrusion, it has been shown to assist in its prevention when coupled with proper irrigation scheduling.
*** Eco-Indicator – 6" ECO-ID: 2-year warranty; 12" ECO-ID-12: 5-year warranty
**** Hunter's cellular module warranty does not apply to the availability or compatibility of cellular data service in any particular area. Availability of compatible data services should be determined prior to purchase.
Learn more at hunter.info/warranty
All products currently under warranty are included in this guide. If you don't see the product you're looking for, it may no longer be under warranty. Learn more at hunter.info/discontinued.
Rotors
PGP-ADJ Rotors
Date code is located on the nozzle housing. (yr/mo)
Warranty period: 2 years
PGP® Ultra, I-20 Rotors
Date code is located on the nozzle housing. (yr/mo)
Warranty period: 5 years
PGP-04-PRB, I-20-PRB, PR-075 Rotors
Date code is located on the bottom of the body. (yr/mo)
Warranty period: 5 years
PGJ Rotors
Date code is located on the bottom of the riser, removed from the body. (yr/mo)
Warranty period: 2 years
SRM Rotors
Date code is located on the bottom of the riser, removed from the body. (yr/mo)
Warranty period: 1 year
I-20-SS, I-25, I-40 Rotors
Date code is located on the bottom of the riser, removed from the body. (yr/mo)
Warranty period: 5 years
I-80 Rotors
Date code is located on the back of the riser, removed from the body. (mo/yr)
Warranty period: 5 years
I-90 Rotors
Date code is located on the lower diameter of the riser. (mo/yr)
Warranty period: 5 years
ST-1600/ST-1700-V Rotors
Date code is located on the components. (yr/mo)
Warranty period: 5 years (component only)
MP Rotator® Nozzles & Sprinkler Bodies
MP Rotator Nozzles
Date code is located under the screen. (mo/dy/yr)
Warranty period: 3 years
Pro-Spray® Sprinkler Bodies
Date code is located on the body cap. (q/yr)
Warranty period: 5 years
Pro-Spray PROS-00 Sprinkler Bodies
Date code is located on the lower diameter of the riser. (q/yr)
Warranty period: 5 years
Pro-Spray PRS30 Sprinkler Bodies
Date code is located on the body cap. (mo/yr)
Warranty period: 5 years
Pro-Spray PRS40 Sprinkler Bodies
Date code is located on the body cap. (mo/yr)
Warranty period: 5 years
PS Ultra Sprinkler Bodies
Date code is located in the ridges of the cap. (q/yr)
Warranty period: 2 years
Valves
1" PGV Valves
Date code is located on the top of the bonnet. (mo/yr)
Warranty period: 2 years
PGV-JT Valves
Date code is located on the side of the inlet. (mo/yr)
Warranty period: 2 years
PGV-ASV Valves
Date code located in the bonnet groove. (mo/yr)
Warranty period: 2 years
1½", 2" PGV Valves
Date code is located on the top of the bonnet. (mo/yr)
Warranty period: 2 years
IBV Valves
Date code is located on the top of the bonnet. (mo/yr)
Warranty period: 5 years
ICV Valves
Date code is located on the top of the bonnet. (mo/yr)
Warranty period: 5 years
Valves & Accessories
Solenoids
Date code is located on the top, below ON (yr/wk) and OFF (mo/yr).
Warranty period: 5 years
Accu Sync® Pressure Regulators
Date code is located on the lower diameter near the thread end. (mo/yr)
Warranty period: 5 years
HCV Check Valves
Date code is located on the side. (mo/yr)
Warranty period: 2 years
Quick Couplers
Date code is located on the top of the valve. (mo/yr)
Warranty period: 5 years
Controllers
A2M-600 Output Modules
Date code is located on the bottom or back side. (mo/yr)
Warranty period: 5 years
ACC2 Communication Modules
Date code is located on the back side. (yr/mo/dy)
Warranty period: 2 years
A2C-D75 Decoder Output Modules (for ACC2 Controller)
Date code is located on the back side of the module. (mo/yr)
Warranty period: 5 years
ACC2 Controller Compartments
Date code is located on the right wall of the wiring compartment. (mo/yr)
Warranty period: 5 years
ACC2 Controller Facepacks
Date code is located on the back side. (mo/yr)
Warranty period: 5 years
ACC Controller Compartments
Date code is located in the back of the wire compartment. (mo/yr)
Warranty period: 2 years
ADM-99 Output Modules (for legacy ACC Decoder)
Date code is located on the top of the connection plate. (mo/yr)
Warranty period: 2 years
ACC Controller Master Modules
Date code is located on the top of the connection plate. (mo/yr)
Warranty period: 2 years
ACC Controller Communication Modules
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
ACC Controller Facepacks
Date code is located in the battery compartment. (mo/yr)
Warranty period: 2 years
RAD-3 UHF Radios
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
PC-DM Decoder Output Modules
Date code is located on the bottom or back side. (mo/yr)
Warranty period: 2 years
NODE-BT Controllers
Date code is located in the battery compartment. (mo/yr)
Warranty period: 2 years
NODE Battery-Operated Controllers
Date code is located in the battery compartment. (mo/yr)
Warranty period: 2 years
Pro-HC Controllers
Date code is located on the bottom right wall of the wiring compartment. (mo/yr)
Warranty period: 2 years
Pro-C, PCC Controller Facepacks
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
Pro-C, PCC, HPC Compartments
Date code is located in the top right wire compartment. (mo/yr)
Warranty period: 2 years
PCM Output Modules
Date code is located on the bottom or back side. (mo/yr)
Warranty period: 2 years
BTT Bluetooth® Tap Timers
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
DUAL® 48M Decoder Output Modules
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
DUAL Decoders
Date code is located on the back side or on the bottom. (mo/yr)
Warranty period: 2 years
EZ-1 Decoders
Date code is located on the bottom. (mo/yr)
Warranty period: 3 years
EZ-DM Decoder Output Modules
Date code is located on the back side. (mo/yr)
Warranty period: 3 years
HC Controllers
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
HCC Controller Facepacks
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
HCC Controller Power Modules
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
HPC (Pro-C® Hydrawise) Facepacks
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
I-Core® Controller Compartments
Compartment date code is located in the lower right wire compartment. (mo/yr)
Warranty period: 2 years
I-Core Controller Facepacks
Facepack date code is located in the battery compartment. (mo/yr)
Warranty period: 2 years
I-Core Controller Modules
Date code is located on the bottom or back side. (mo/yr)
Warranty period: 2 years
ICC2 Controller Compartments
Date code is located on the back right wall of the wiring compartment. (mo/yr)
Warranty period: 5 years
ICC2 Controller Facepacks
Date code is located on the lower back side. (mo/yr)
Warranty period: 5 years
ICC2 Controller Modules
Date code is located on the bottom or back side. (mo/yr)
Warranty period: 5 years
ICD Decoders
Date code is located on the back side, above the approvals label, or on the bottom. (mo/yr)
Warranty period: 5 years
ICD-HP Programmers
Date code is located on the back side. (mo/yr)
Warranty period: 5 years
ROAM Receivers
Date code is located on the back side. (mo/yr)
Warranty period: 2 years
ROAM Transmitters
Date code is located in the battery compartment cover. (mo/yr)
Warranty period: 2 years
ROAM XL Receivers
Date code is located on the back side. (mo/yr)
Warranty period: 3 years
ROAM XL Transmitters
Date code is located in the battery compartment. (mo/yr)
Warranty period: 3 years
X-Core® Indoor Controllers
Date code is located on the bottom of the controller. (mo/yr)
Warranty period: 2 years
X-Core, XC Hybrid Controllers
Date code is located in the lower right area of the wiring compartment. (mo/yr)
Warranty period: 2 years
Pump Start Relays (PSR)
Date code is located on the inside cover. (mo/yr)
Warranty period: 2 years
X2™ Controllers
Date code is located under the wiring terminal strip. (mo/yr)
Warranty period: 2 years
WAND Modules
Date code is located on the back side of the module. (mo/yr)
Warranty period: 2 years
Wireless Valve Output Modules
Date code is located on the back side of the module. (mo/yr)
Warranty period: 2 years
Wireless Valve Links
Date code is located on the compliance label above the battery compartment. (mo/yr)
Warranty period: 2 years
Wireless Solar Repeaters (RPT)
Date code is located on the sticker on the battery compartment. (mo/yr)
Warranty period: 2 years
PC-WIFITM Modules
Date code is located on the bottom edge of the module near the gray ribbon cable. (mo/yr)
Warranty period: 2 years
Sensors
Wired Solar Sync® Sensors
Date code is located on the bottom of the sensor. (mo/yr)
Warranty period: 5 years
Flow-Clik®, Flow-Sync® Sensors
Receiver date code is located on the back side. Sensor date code is located on the side. (mo/yr)
Warranty period: 5 years
Freeze-Clik® Sensors
Date code is located on the bottom of the sensor. (mo/yr)
Warranty period: 5 years
HC Flow Meters
Date code is located under the cap and around the meter lens. (yr/mo)
Warranty period: 2 years
Mini-Clik® Sensors
Date code is located on the side. (mo/yr)
Warranty period: 5 years
Mini Weather Stations (MWS)
Date code is located on the side. (mo/yr)
Warranty period: 5 years
Wired Rain-Clik® Sensors
Date code is located on the side. (mo/yr)
Warranty period: 5 years
Wireless Rain-Clik Sensors
Receiver date code is located on the back side. Sensor date code is located on the bottom. (mo/yr)
Warranty period: 5 years
Sensors & Micro Irrigation
Wireless Solar Sync Sensors
Receiver date code is located on the back side. Sensor date code is located on the bottom. (mo/yr)
Warranty period: 5 years
Wind-Clik® Sensors
Date code is located on the side. (mo/yr)
Warranty period: 5 years
Wireless Flow Sensors
Receiver date code is located on the bottom. Sensor date code is located on the side. (mo/yr)
Warranty period: 5 years
Soil-Clik® Sensors
Receiver date code is located on the back side. Sensor date code is located on the bottom. (mo/yr)
Warranty period: 5 years
Hunter Dripline (HDL), HDL-COP
Date code is located on the length of dripline. (mo/yr)
Warranty period: 5 years
Filter Regulators (HFR)
Date code is located on the side. (yr/mo/day)
Warranty period: 2 years
Hunter Customer Support
Online Product Support
Visit our Support Library for instructional videos, owner's manuals, installation details, articles, and more.
Learn more at hunterirrigation.com/support.
Hunter University
The comprehensive online training programs available through Hunter University are designed to help you and your customers become familiar with Hunter products - for free! Many courses are also available in Spanish.
Learn more at training.hunterirrigation.com.
Customer Service
Our dedicated Customer Service representatives are available for assistance with product orders, order status, RMAs, and more. Call us today at 1-800-383-4747.
Hunter Preferred Program
Your customers can earn points for purchasing Hunter and FX Luminaire products that can be redeemed for prizes, trips, credit, and more. Contractors and public agencies can enroll online at preferred.hunterindustries.com.
Questions about the program? Phone: 1-877-888-0167 Email: hunter.preferred@hunter.global
