Bestway Power Steel Rectangular Pools: Comprehensive Owner's Manual

Your guide to safe installation, proper use, and essential maintenance for your Bestway Power Steel Rectangular Pool.

Important Information & Support

⚠ WARNING: Carefully read, understand, and follow all information in this user manual before installing and using the swimming pool. These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity. Retain this information for future use.

DO NOT RETURN TO THE STORE. For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwaycorp.com/support

Visit Bestway YouTube channel: Bestway YouTube channel

Safety Guidelines

Non-Swimmers Safety

Safety Devices

Safety Equipment

Safe Use of the Pool

?

Keep children under supervision in the aquatic environment. No diving.

?

Removable ladders shall be placed on a horizontal surface.

⚠️

Accessible surfaces have to be checked regularly to avoid injuries.

?

Regularly monitor bolts and screws. Remove splinters or any sharp edges to avoid injuries.

ATTENTION: Do not leave the drained pool outside. The empty pool is liable to become deformed and/or displaced due to wind.

If you have a filter pump, refer to the pump's manual for instructions.

WARNING! The pump cannot be used while people are inside the pool!

If you have a ladder, refer to the ladder's manual for instructions.

WARNING! The use of a swimming pool implies compliance with the safety instructions described in the operating and maintenance guide. In order to prevent drowning or other serious injuries, pay particular attention to the possibility of unexpected access to the swimming pool by children under 5 years by securing the access to it, and, during the bathing period, keep them under constant adult supervision.

Please read carefully and keep for future reference.

Choosing the Correct Location

NOTE: The pool must be set up on a completely flat and level surface. Please do not install the pool if the surface is inclined or sloped.

Correct Conditions to Set Up the Pool:

NOTE: Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.

Incorrect Conditions to Set Up the Pool:

NOTE: Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.

NOTE: If you have a filter pump, refer to the pump's manual for instructions.

NOTE: The ladder must match the pool size and should be used only for entering and exiting the pool. It is forbidden to exceed the permitted payload of the ladder. Check regularly if the ladder is properly assembled.

Pool Maintenance

WARNING: If you do not adhere to the maintenance guidelines covered herein, your health might be at risk, especially that of children. Pool water treatment is essential for the safety of the users. Using chemicals inappropriately will cause property damage and personal injury.

NOTE: The pump is used to circulate the water and to filter small particles. In order to keep your pool water clean and hygienic, you must also add chemicals.

  1. It is recommended not to fill the pool with catchment water, drilling water, or drainage well water: these waters generally contain polluted organic substances including nitrates and phosphates. Filling pools with water from the public network is advised.
  2. Always keep your pool clean and apply the correct pool chemicals. Unsanitary water is a serious health hazard. It is recommended to use disinfectant, flocculant, acid or alkali chemicals to treat your pool.
  3. Clean the PVC liner regularly with non-abrasive brushes or a pool vacuum cleaner.
  4. Throughout the season, the water filtration system must run long enough each day to clean the entire volume of water in the pool.
  5. Check the filter cartridge (or sand in a sand filter) regularly and replace dirty cartridges (or sand).
  6. Regularly check the screws, bolts and all the metal parts for rust. Replace if necessary.
  7. If it rains, check that the water level is not higher than the specified level. If water exceeds the specified levels, drain the pool to the specified level.
  8. Do not use the pump when the pool is in use.
  9. Cover the pool when not in use.
  10. For pool water treatment, the pH value is very important.

ATTENTION: Do not leave the drained pool outside. The following parameters ensure good quality water:

ParametersValues
Water clarityclear view of the pool bottom
Colour of the waterno colour should be observed
Turbidity in FNU/NTUmax. 1.5 (preferably less than 0.5)
Nitrate concentration above that of fill water in mg/lmax. 20
Total organic carbon (TOC) in mg/lmax. 4.0
Redox potential against Ag/AgCl 3.5 m KCl in mVmin. 650
pH value6.8 to 7.6
Free active chlorine (without cyanuric acid) in mg/l0.3 to 1.5
Free chlorine used in combination with cyanuric acid in mg/l1.0 to 3.0
Cyanuric acid in mg/lmax 100
Combined chlorine in mg/lmax 0.5 (preferably close to 0.0 mg/l)

ATTENTION: Do not use pump when pool is in use. During the season of use of the swimming pool, the filtration system must be necessarily put into service every day, enough for a long time to assure at least a complete renewal of the volume of water.

Repair

Check pool for any leaks from valves or seams, check the ground cloth for any evident water loss. Do not add chemicals until this has been done.

NOTE: In the event of a leak, patch your pool using the underwater adhesive repair patch provided. Refer to the FAQs for further information.

Dismantling

  1. Unscrew the drain valve cap on the outside of the pool counter clockwise and remove.
  2. Connect the adaptor to the hose and put the other end of the hose in the area where you are going to drain your pool. (Check local regulations for drainage by-laws).
  3. Screw the control ring of the hose adaptor clockwise onto the drain valve. The drain valve will be open and water will start to drain automatically.

ATTENTION: Water flow can be controlled with the control ring.

  1. When draining is finished, unscrew the control ring to close the valve.
  2. Disconnect the hose.
  3. Screw the cap back onto the drain valve.
  4. Air dry pool.

ATTENTION: Do not leave the drained pool outside.

Storage and Winterization

  1. Please remove all the accessories and spare parts of the pool and store them clean and dry.
  2. Once pool is completely dry, sprinkle with talcum powder to prevent pool from sticking together, fold pool carefully. If pool is not completely dry, mold may result and will damage the pool liner.
  3. Store liner and accessories in a dry place with a moderate temperature between 5°C / 41°F and 38°C / 100°F.
  4. During the rainy season, pool and accessories should be stored as per above instructions also.
  5. Improper draining of the pool might cause serious personal injury and/or damage to personal property.
  6. Bestway strongly recommends the pool is disassembled during the off season (winter months). Store in a dry location out of children's reach.

Assembly Instructions

To lengthen the life of your pool, it is important to sprinkle the top rail with Talcum Powder before assembly. Talcum Powder is not included and easily available in the market. Bestway Inflatables will not be responsible for damage caused to the pool due to mishandling or failure to follow these instructions.

  1. Step 1: Lay out parts and check quantities.

    Lay out all parts and check that you have the correct quantities as listed in the components list. If any part is missing, do not assemble the pool; contact Bestway Customer Service.

    Visual description: A diagram shows various pool frame components laid out on the ground, including top rails, connectors, and U-supports, with labels indicating their types (A, B, C, D, E, F, H, J, K, L, M, N, O, P).

  2. Step 2: Spread out the pool liner.

    Spread out the pool liner and make sure it is right side up, let it sit exposed to direct sunlight for 1 hour or more so that the pool is more flexible during set up.

    Visual description: A rectangular pool liner is shown unfolded on the ground, with an arrow indicating "right side up". The liner appears to be softening under sunlight.

  3. Step 3: Position the pool and connect filter pump.

    Place the pool near an adequate drainage system to deal with overflow water and ensure the pool's inlet A and outlet B are correctly positioned to allow your filter pump to connect to a power source.

    Visual description: A pool liner is shown with an inlet (A) and outlet (B) valve. A hose connects to the outlet valve, leading to a drainage system. A filter pump is shown connected to the inlet and outlet valves.

  4. Step 4: Connect the connection valve.

    For pools with a connection valve, if you want to connect other pool cleaning kits to the pool through the connection valve, disassemble the Debris Screen from the Connector.

    Visual description: A connection valve is shown with a debris screen that can be removed. This allows for the attachment of pool cleaning kits.

  5. Step 5: Fill the pool with water.

    Fill the pool until water capacity is 90%, DO NOT OVERFILL as this could cause the pool to collapse. In times of heavy rainfall you may need to empty some of the water to ensure the level is correct.

    Visual description: A pool is shown being filled with water. A water level indicator shows the water reaching approximately 90% capacity. A separate diagram illustrates a level pool (0° incline) versus a sloped pool (indicated by a tilted water line and a "?" symbol), emphasizing the importance of a level surface. Another diagram shows a hand pushing down on a pool liner, indicating the flexibility of the material, and a checkmark for "1in. - 2in. / 2-5 cm" which likely refers to the recommended depth for talcum powder application or liner flexibility.

Components List

This section details the various components required for Bestway Power Steel Rectangular Pools, categorized by type and size, along with their corresponding item numbers, part codes, and quantities.

Component TypeSize (m / ft)Item #Part CodeQty
Top Rail A / Corrimão Superior A / Riel superior A2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61356ASS162
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P037522
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P037522
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P037612
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P61277ASS164
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P61277ASS166
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P61371ASS168
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P61371ASS1612
Top Rail C / Corrimão Superior C / Riel superior C2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61358ASS162
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P037542
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P037542
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996/0
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P037492
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P037492
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P037582
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P037582
Top Rail B / Corrimão Superior B / Riel superior B2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61357ASS162
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P037532
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P037532
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P037622
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P037472
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P037472
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P037572
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P037572
Top Rail D / Corrimão Superior D / Riel superior D2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61359ASS162
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P037562
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P037562
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P037502
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P037502
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P61389ASS162
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P61389ASS162
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P037502
Top Rail E / Corrimão Superior E / Riel superior E2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409/0
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P61360ASS162
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P61360ASS162
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P037512
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P037512
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P037592
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P037592
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P037512
Top Rail F / Corrimão Superior F / Riel superior F2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409/0
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727/0
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728/0
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P61370ASS164
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998/0
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P037602
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P037602
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P61370ASS164
C-Connector / Conector-C / Conectores en "C"2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61361ASS164
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P61361ASS164
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P61361ASS164
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P61282ASS164
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P61282ASS164
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P61282ASS164
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P61282ASS164
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P61282ASS164
U-Support A / Suporte em U A / Soporte en "U" A2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61362ASS164
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P61362ASS166
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P61368ASS166
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P61283ASS1612
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P61283ASS1612
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P61392ASS1616
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P61392ASS1618
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P61392ASS1624
U-Support B / Suporte em U B / Soporte en "U" B2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P61363ASS164
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P61363ASS164
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P61369ASS164
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996/0
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998/0
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662/0
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477/0
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625/0
Stopper / Tampão / Tope2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P6C1418ASS192
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P6C1418ASS192
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P6C1418ASS192
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P6C1418ASS192
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P6C1418ASS190
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P6C1418ASS190
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P6C1418ASS190
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P6C1418ASS190
Pool Liner / Forro da piscina / Revestimiento de piscina2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P052161
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#5672756251ASS19 P008941
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#5672856241ASS19 P041931
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#5699656670ASS19 P048221
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#5699856223ASS19 P048241
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#5666256272ASS191
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#5647756229ASS191
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#5662556338ASS191
Hose Adaptor / Adaptador de Mangueira / Adaptador de manguera2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409P6H1419ASS161
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727P6H1419ASS161
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728P6H1419ASS161
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996P6H1419ASS161
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P6H1419ASS161
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P6H1419ASS161
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P6H1419ASS161
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P6H1419ASS161
Pool Inlet Strainer / Filtro de entrada da piscina / Tamiz de entrada de la piscina2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409/0
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727/0
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728/0
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996/0
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P6H1317ASS161
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P6H1317ASS161
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P6H1317ASS161
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P6H1317ASS161
Control Valve / Válvula de Controlo / Válvula de control2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409/0
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727/0
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728/0
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996/0
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P6(H1)510ASS161
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P6(H1)510ASS161
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P6(H1)510ASS161
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P6(H1)510ASS161
Pool Outlet Strainer / Filtro de saída da piscina / Tamiz de salida de la piscina2.87 x 2.01 x 1.00 (9'5" x 6'7" x 39.5")#56409/0
4.04 x 2.01 x 1.00 (13'3" x 6'7" x 39.5")#56441/#56251 #56426/#56442/#56660 #56721/#56727/0
4.12 x 2.01 x 1.22 (13'6" x 6'7" x 48")#56456/#56457 #56458/#56661 #56722/#56728/0
4.88 x 2.44 x 1.22 (16' x 8' x 48")#56670/#56671 #56672/#56673 #56995/#56996/0
5.49 x 2.74 x 1.22 (18' x 9' x 48")#56465/#56466 #56467/#56468 #56997/#56998P6H1323ASS161
6.71 x 3.66 x 1.32 (22' x 12' x 52")#56470/#56471 #56473/#56662P6H1323ASS161
7.32 x 3.66 x 1.32 (24' x 12' x 52")#56474/#56475 #56476/#56477P6H1323ASS161
9.56 x 4.88 x 1.32 (31'4" x 16' x 52")#56623/#56625P6H1323ASS161

Pool Layout Diagrams (Textual Descriptions)

NOTE: Drawing for illustration purpose only. May not reflect actual product. Not to scale.

4.88 m x 2.44 m x 1.22 m (16' x 8' x 48") Pool Layout

This layout shows a rectangular pool frame. The top rails are arranged with two 'E' sections, two 'F' sections, and two 'D' sections on the longer sides, and two 'A' sections on the shorter sides. The 'B' sections are used for the corners. The U-supports are positioned along the sides to provide stability.

5.49 m x 2.74 m x 1.22 m (18' x 9' x 48") Pool Layout

This layout depicts a larger rectangular pool. The top rails consist of 'C' and 'A' sections along the longer sides, and 'B' sections at the corners. 'D' sections are used for the shorter sides. U-supports are placed along the perimeter for structural integrity.

6.71 m x 3.66 m x 1.32 m (22' x 12' x 52") Pool Layout

This layout illustrates an even larger rectangular pool. The top rails are composed of multiple 'C' and 'A' sections along the longer sides, with 'B' sections at the corners. 'D' and 'F' sections are used for the shorter sides. U-supports are distributed along the pool's edges.

7.32 m x 3.66 m x 1.32 m (24' x 12' x 52") Pool Layout

This layout shows a rectangular pool with extended dimensions. The top rails feature multiple 'C' and 'A' sections along the longer sides, and 'B' sections at the corners. 'D' and 'F' sections are used for the shorter sides. U-supports are positioned along the perimeter.

9.56 m x 4.88 m x 1.32 m (31'4" x 16' x 52") Pool Layout

This is the largest rectangular pool layout. The top rails are formed by numerous 'C' and 'A' sections along the longer sides, with 'B' sections at the corners. 'D' and 'E' sections are used for the shorter sides. 'F' sections are also present along the longer sides. U-supports are extensively used around the entire perimeter for maximum stability.

Assembly Steps (Textual Descriptions)

  1. Step 1: Lay out parts and check quantities.

    Lay out all parts and check that you have the correct quantities as listed in the components list. If any part is missing, do not assemble the pool; contact Bestway Customer Service.

    Visual description: A diagram shows various pool frame components laid out on the ground, including top rails, connectors, and U-supports, with labels indicating their types (A, B, C, D, E, F, H, J, K, L, M, N, O, P).

  2. Step 2: Spread out the pool liner.

    Spread out the pool liner and make sure it is right side up, let it sit exposed to direct sunlight for 1 hour or more so that the pool is more flexible during set up.

    Visual description: A rectangular pool liner is shown unfolded on the ground, with an arrow indicating "right side up". The liner appears to be softening under sunlight.

  3. Step 3: Position the pool and connect filter pump.

    Place the pool near an adequate drainage system to deal with overflow water and ensure the pool's inlet A and outlet B are correctly positioned to allow your filter pump to connect to a power source.

    Visual description: A pool liner is shown with an inlet (A) and outlet (B) valve. A hose connects to the outlet valve, leading to a drainage system. A filter pump is shown connected to the inlet and outlet valves.

  4. Step 4: Connect the connection valve.

    For pools with a connection valve, if you want to connect other pool cleaning kits to the pool through the connection valve, disassemble the Debris Screen from the Connector.

    Visual description: A connection valve is shown with a debris screen that can be removed. This allows for the attachment of pool cleaning kits.

  5. Step 5: Fill the pool with water.

    Fill the pool until water capacity is 90%, DO NOT OVERFILL as this could cause the pool to collapse. In times of heavy rainfall you may need to empty some of the water to ensure the level is correct.

    Visual description: A pool is shown being filled with water. A water level indicator shows the water reaching approximately 90% capacity. A separate diagram illustrates a level pool (0° incline) versus a sloped pool (indicated by a tilted water line and a "?" symbol), emphasizing the importance of a level surface. Another diagram shows a hand pushing down on a pool liner, indicating the flexibility of the material, and a checkmark for "1in. - 2in. / 2-5 cm" which likely refers to the recommended depth for talcum powder application or liner flexibility.

PDF preview unavailable. Download the PDF instead.

82E2E049-C31F-45CA-8E94-B346B79D9EC6 Adobe PDF library 10.01 Adobe Illustrator CC (Macintosh)

Related Documents

Preview Bestway Power Steel Rectangular Pool User Manual
Comprehensive user manual for Bestway Power Steel rectangular pools, covering safe installation, maintenance, repair, and storage. Includes detailed parts lists and warranty information for various pool models.
Preview Bestway Power Steel Rectangular Pools Owner's Manual
Comprehensive owner's manual for Bestway Power Steel Rectangular Pools, providing essential safety guidelines, installation instructions, maintenance tips, and troubleshooting information for various pool sizes and components.
Preview Bestway Power Steel Rectangular Pools Owner's Manual
Comprehensive owner's manual for Bestway Power Steel Rectangular Pools, providing essential instructions for safe setup, operation, maintenance, and troubleshooting to ensure optimal pool performance and longevity.
Preview Bestway Rectangular Frame Pool Set User Manual and Safety Guide
Comprehensive user manual for Bestway Rectangular Frame Pool Sets, covering safe installation, operation, maintenance, and storage. Includes important safety warnings and part identification.
Preview Bestway Power Steel Rectangular Pools Owner's Manual
This owner's manual provides comprehensive instructions for the safe setup, operation, and maintenance of Bestway Power Steel Rectangular Pools. It covers essential safety guidelines, installation procedures, pool maintenance, troubleshooting tips, and proper storage to ensure a long-lasting and enjoyable swimming experience.
Preview Bestway Power Steel Rectangular Pools Owner's Manual
This owner's manual provides comprehensive instructions for the safe setup, operation, and maintenance of Bestway Power Steel Rectangular Pools. It covers essential safety guidelines, installation procedures, pool maintenance, troubleshooting tips, and proper storage to ensure a long-lasting and enjoyable swimming experience.
Preview Bestway Power Steel Rectangular Pools Owner's Manual
This owner's manual provides comprehensive instructions for the safe setup, operation, and maintenance of Bestway Power Steel Rectangular Pools. It covers essential safety guidelines, installation procedures, pool maintenance, troubleshooting tips, and proper storage to ensure a long-lasting and enjoyable swimming experience.
Preview Bestway Power Steel Rectangular Frame Pool Set User Manual
Comprehensive user manual for Bestway Power Steel rectangular frame pools, covering assembly, safety warnings, maintenance, water chemistry, and storage instructions for various models.