Baseus Blade HD 20000mAh 100W Laptop Power Bank
User Manual and Product Information
Product Overview
This document provides information for the Baseus Blade HD (High Density Version) digital fast charging power bank. It features a 20000mAh capacity and a powerful 100W output, designed to efficiently charge a wide range of devices including laptops, tablets, and smartphones.
Important Safety Precautions
- Do not disassemble the product.
- Avoid exposing the product to extreme temperatures (below -10°C or above 60°C for discharging, or above 35°C for charging).
- Keep the product away from water and moisture.
- Do not drop or subject the product to strong impacts.
- Use only original charging cables and accessories.
- Do not use the product if it appears damaged.
- Keep out of reach of children.
- Avoid using the product in environments with flammable gases or liquids.
- Do not expose to direct sunlight or place near heat sources.
Product Specifications
Model: PPBLD100HD
Battery Capacity: 20000mAh / 74Wh
Rated Capacity: 12000mAh (5V/2A)
Energy Conversion Rate: ≥75%
Input (Type-C1/C2): 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W Max)
Output (Type-C1/C2): 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W Max)
Output (USB1/USB2): 4.5V/5A, 5V/4.5A, 5V/3A, 9V/3A, 12V/2.5A (30W Max)
Type-C1+C2 Output: 100W + 100W (Max)
USB1+USB2 Output: 30W + 30W (Max)
Type-C1/C2+USB1/USB2 Output: 100W + 30W (Max)
Total Output: 100W Max
Battery Type: Lithium-ion polymer
Dimensions: 163.5 x 76 x 24.5 mm
Weight: Approx. 490g
Product Diagram
The power bank features a digital display on the front. On one side, there are four ports:
- Type-C1 port [input/output]
- Type-C2 port [input/output]
- USB1 port [output]
- USB2 port [output]
The digital display shows the current battery percentage and the real-time input/output power in Watts (W).
Usage Instructions
Charging the Power Bank:
To charge the power bank, connect a compatible high-power charger (e.g., 100W PD charger) to one of the Type-C ports. The digital display will show the charging status and current input power.
Charging Devices:
Connect your device (laptop, phone, tablet, etc.) to one of the available ports (Type-C1, Type-C2, USB1, USB2) using an appropriate cable. Press the power button on the side of the power bank to initiate charging. The digital display will show the output power being delivered to the connected device.
Checking Battery Level:
Press the power button once to check the remaining battery percentage displayed on the screen.
Operating Environment
- Charging Temperature: 0°C to 35°C
- Discharging Temperature: -10°C to 60°C
Ensure the product is used within these temperature ranges for optimal performance and safety.
Package Contents
- Baseus Blade HD Power Bank (20000mAh 100W)
- USB-C to USB-C Cable (supports up to 100W charging)
- User Manual
Statement on Hazardous Substances
This product complies with the EU RoHS Directive (2011/65/EU) and its amendments. The table below indicates the presence of hazardous substances in electronic information products:
| Component | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr6+) | Polybrominated Biphenyls (PBBs) | Polybrominated Diphenyl Ethers (PBDEs) |
|---|---|---|---|---|---|---|
| PCB | O | O | O | O | O | O |
| Plastic Casing | O | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Circuit Board | O | O | O | O | O | O |
| Display Screen | O | O | O | O | O | O |
| Connectors | O | O | O | O | O | O |
Legend:
- 'O' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement of GB/T 26572.
- 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the component is above the limit requirement of GB/T 26572.
Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product is CE marked and conforms to relevant EU directives. It also carries UKCA marking.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 5th Floor, Building 2, Baseus Intelligence Park, No.2006, Xuegang Road, Bantian Street, Longgang District, Shenzhen, China.
Authorized Representative (EU): Baseus Europe B.V.
Address: Veldweg 1, 5674 AA Nuenen, The Netherlands.
For more information, visit www.baseus.com.
Disposal: Please dispose of this product responsibly. Do not dispose of with household waste. [recycle symbol] [battery disposal warning]
