Aqara Hub M1S Gen 2 Smart Home Control Center User Guide
Home » Aqara » Aqara Hub M1S Gen 2 Smart Home Control Center User Guide
Product Introduction
The Aqara Hub M1S Gen 2 is a smart home control center that connects Zigbee devices to a Wi-Fi network. It manages and controls smart scenes and can conveniently operate smart devices such as plugs, switches, bulbs, and curtains.
For more details about Aqara products, please visit www.aqara.com.
Button Functions
The device features a button with the following functions:
- Single Press: Turn on/off the night light.
- Long Press (10 seconds): Reset the network connection.
- Press 10 times: Restore the factory default settings.
The hub also has an Audio Output and a Night Light feature.
Quick Setup
1. Download the App
Scan the QR code or search for "Aqara Home" in the app store to download and install the Aqara Home app.
Download link: http://cnbj2.fds.api.xiaomi.com/lumi-app/aiot-h5/aqara-home/developing.html
2. Add Hub M1S Gen
- Plug the hub into a socket and wait for the yellow light to blink quickly. Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network. If using a dual-band router, disable the 5 GHz Wi-Fi network. Keep your phone close to the hub and ensure both are on the same Wi-Fi network.
- Open the Aqara Home app, tap "+" in the upper right corner, select "Hub M1S Gen 2", and follow the on-screen instructions to complete adding the hub.
- For iOS users: Follow instructions to scan the product box or manually enter the HomeKit code on the hub. Once added, the hub will appear in the Apple Home app. Keep the HomeKit code in a safe place for future use.
- If adding the hub fails, press the button on the hub for over 10 seconds until the yellow light flashes quickly, then try adding it again.
Troubleshooting Device Addition:
- Ensure the device is connected to a 2.4GHz Wi-Fi network.
- Wi-Fi names or passwords with special characters might cause issues; try using ordinary characters.
- Check if the router's Wi-Fi connection watcher function is enabled, as it can cause network connection failures.
- Verify if the router's AP isolation function is enabled, which might prevent the phone from finding the hub on the LAN.
It is recommended not to connect the hub to a bridge network.
Trouble adding to HomeKit:
- "Failed to add accessory": This may occur due to multiple failed attempts, preventing the iOS cache from clearing. Restart the iOS device and reset the hub.
- "Accessory already added": After restarting the iOS device and resetting the hub, manually enter the HomeKit setup code to add it again.
- "Accessory not found": Wait for 3 minutes after resetting the hub, then manually enter the HomeKit setup code to add it again.
3. Add Bridge Accessories
After the hub is connected, open the Aqara Home app, navigate to the "Accessories" page, tap "+" in the upper right corner, and select the accessory to add according to the instructions. Refer to the bridge accessory quick start guide for more details.
Installation
- For optimal communication between the hub and its accessories, install the hub at the center of the area where the accessories are located.
- Depending on the environment, the indoor transmission distance can reach up to 30 meters between the hub and bridge accessories without obstructions like walls.
Indicator Light Description
| Indicator Light Status | Hub Status |
|---|---|
| Yellow light is always on | Starting up |
| Yellow light flashes | Waiting for network connection |
| Yellow or white light flashes | Connecting to network |
| White light is always on | Network configurations are not completed within 15 minutes after start-up |
| Purple light flashes | Allowed to add the sub-device |
| The indicator light is off | Works normally or powered off |
Notice
- Users with an Apple TV (4th gen+), iPad (iOS 10+), or HomePod can control HomeKit-enabled accessories remotely and automate actions based on time, location, or sensor detection.
- Communication between Apple devices (iPhone, iPad, Apple Watch, HomePod, Mac) and the Aqara Hub is secured by HomeKit technology.
- The "Works with Apple" badge indicates that an accessory is designed for specific Apple technology and certified to meet Apple performance standards. Apple is not responsible for the device's operation or compliance with standards.
Specifications
- Model: HM1S-G02
- Dimensions: 80 x 80 x 41.5 mm (3.15 x 3.15 x 1.63 in.)
- Wireless Protocol: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Zigbee
- Input: 100-240V~, 50/60Hz, 0.2A (120V~, 60Hz, 0.2A For North America)
- Operating Temperature: -10°C to +40°C (14°F to 104°F)
- Operating Humidity: 0% – 95% RH, no condensation
- Wi-Fi Operation Frequency: 2412-2472 MHz, Maximum Output Power: ≤ 20 dBm
- Zigbee Operation Frequency: 2405-2475 MHz, Maximum Output Power: ≤ 13 dBm
- Online Customer Service: www.aqara.com/support
- Email: support@aqara.com
- Manufacturer: Lumi United Technology Co., Ltd.
- Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China
Warnings
- This product is NOT a toy. Keep children away from it.
- This product is designed for indoor use only. Do NOT use it in humid environments or outdoors.
- Beware of moisture; do NOT spill water or other liquids onto the product.
- Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
- Do NOT attempt to repair this product yourself. All repairs must be performed by an authorized professional.
- This product is suitable for enhancing home convenience and indicating device status. It should NOT be used as security equipment for homes, buildings, warehouses, or other places. The manufacturer is not liable for any risks or property losses resulting from misuse.
- The mains plug serves as a disconnect device and must remain easily accessible during intended use. To completely disconnect the apparatus, unplug the main plug from the socket outlet.
Regulatory Compliance
FCC Compliance
FCC ID: 2AKIT-HM1S-G02
This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If interference occurs, users are encouraged to try correcting it by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment to an outlet on a different circuit than the receiver.
- Consulting the dealer or an experienced radio/TV technician.
RF Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated with any other antenna or transmitter.
IC Compliance (Canada)
IC: 22635-HM1SG02
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
This equipment complies with IC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated with any other antenna or transmitter.
EU Declaration of Conformity
Lumi United Technology Co., Ltd. declares that the radio equipment type [Hub M1S Gen 2, HM1S-G02] complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.aqara.com/DoC/
Products bearing the WEEE symbol are waste electrical and electronic equipment and should not be mixed with unsorted household waste. Dispose of them at designated collection points for recycling to protect human health and the environment. Contact local authorities for more information on collection points and terms. Under normal use, maintain a separation distance of at least 20cm between the antenna and the user's body.
