Thetford Triplex 700 Series Cooker User Manual

Declaration of Conformity

We: THETFORD Ltd

Address: Unit 6 Brookfields Way, Manvers, Rotherham, S63 5DL

Telephone: (+44) (0) 844 997 1960. Fax: (+44) (0) 844 997 1961

Declare under our sole responsibility that:

Product Types: Domestic build-in LP Gas and dual fuel cooking appliances;

Model Number/Description: Triplex SOH70xxx, SOH71xxx, SOH75xxx, SOH76xxx & SOH77xxx Series Cookers; SHB70xxx & SHB75xxx Series Hobs; Duplex SOG70xxx & SOG75xxx Series Ovens & Grills; MK3 Ovens SOV70xxx Series; XL Duplex SOG10xxx Series Ovens & Grills; XL Ovens SOV10xxx Series;

Are in conformity with the relevant European Union harmonization legislation, Regulation (EU) 2016/426 which applies as from 21 April 2018 and are manufactured in accordance with the harmonised European standards; EN 30-1-1:2008+A3:2013 & EN 30-2-1:2015;

Satisfy the essential requirements of the Low Voltage Directive 2014/35/EU, where applicable and are manufactured in accordance with the harmonised European standards; EN 60335-1 (IEC 60335-1:2010); EN 60335-2-6 (IEC 60335-2-6:2002 +A1:2004 +A2:2008); EN 60335-2-102 (IEC 60335-2-102:2006+A1:2010);

Satisfy the essential requirements of the Electro Magnetic Compatibility Directive 2014/30/EU and are manufactured in accordance with the harmonized European standards; EN 55014-1: 2006 + A1:2009 + A2:2011 & EN55014-2: 1997 + A1:2001 + A2: 2008; EN 61000-3-2:2006 +A1:2009 & EN 61000-3-3:2013 where applicable;

We also declare that the production of each specific model will be in conformity with the type as described in the EC type-examination certificate; CE 680550, Issued by BSI

We also declare that the production of each specific model will be in conformity with the type as described in Test Report(s): 8694896, 8432405, TR 14 404 & TR 15 049 Issued by BSI

Name: Bartho Anderson

Title/Position: Director

Place & Date of Issue: Rotherham, 23rd February 2018

Introduction

This is the user manual for your Thetford cooker. Please read the safety instructions and information on the use and maintenance of the cooker carefully before putting the appliance into operation. This way, you will ensure that you use the cooker safely and efficiently. Keep this manual for future reference.

This document is version SINS2026/0521-V05 of the user manual. The latest version can be found at www.thetford.com.

Symbols Key

Warning: Danger of injury and/or damage.

Caution: Hot surface. Danger of injury and/or damage.

Attention: Important information.

Note: Information.

Safety

! Children from the age of 8 years and persons with reduced physical, sensory or mental capabilities and/or lack of experience or knowledge may only use the appliance if they are supervised or have received instructions regarding the safe use of the appliance and know the dangers associated with its use.

! Keep children younger than 8 years away from the appliance, unless they are under constant supervision.

! Do not let children play with the appliance.

! Do not let children clean or maintain this appliance, and do not leave it unattended.

! Use only parts supplied by the manufacturer.

! Do not make any changes or modifications to the appliance unless approved by the manufacturer or their representative.

! If the power cable is damaged, it must be replaced by the manufacturer, a service center, or a similarly qualified person for safety reasons.

! Use the appliance exclusively for cooking and for no other purpose, such as space heating. This can lead to carbon monoxide poisoning and overheating of the appliance. The manufacturer is not liable for damage caused by improper use or incorrect adjustment of the controls.

! This appliance is not intended to be operated by an external timer or a separate remote control system.

! The use of this gas cooker leads to the generation of heat, moisture, and combustion residues in the room where it is installed. Ensure that the room is adequately ventilated when the appliance is in operation. For prolonged use, additional ventilation may be required, for example, by opening a window or increasing the extraction power of the hood.

! Do not extinguish open flames with water. Turn off the burner and cover the flames with a lid or a fire blanket.

! The appliance and its accessible parts become hot during use. Avoid touching heating elements as much as possible.

! The cooking process must be supervised. A short cooking process must be continuously supervised. It can lead to a fire if you cook with fat or oil and leave the cooktop unattended. Do not leave the appliance unattended when you are using it.

! The use of an unsuitable cooktop protector can lead to accidents.

! Do not store items on the cooktop of the stove - there is a fire hazard.

! The burners and pan supports are hot during and after operation. Allow all parts to cool down before touching them, as this can otherwise lead to serious injuries.

! The racks and trays in the appliance are hot during and after use. Allow all parts to cool down before touching them, as this can otherwise lead to serious injuries. Always use oven gloves when removing racks and trays from the oven.

! Do not store items inside the appliance.

! Do not place heavy objects on the open door of the appliance.

! The appliance and its accessible parts can be hot when the grill is in operation. Keep small children away from the appliance.

Caution: Hot surfaces. See manual for grill operation. The grill door must be open during grill operation.

! If abnormal deviations in cooking temperature occur, the oven thermostat should be checked by a qualified service technician.

! Be careful not to overload the oven. Ensure sufficient space for heat to circulate unimpeded.

! Do not use steam cleaners or high-pressure cleaners for cleaning the appliance. See Maintenance and Cleaning for instructions.

! Oil and grease must not accumulate in the appliance. Clean the appliance after each use.

! Before starting cleaning or maintenance work, the appliance must cool down and be disconnected from the gas and power supply.

! The glass lid can snap shut when lowered due to the Travel-Lock action of the hinges. Keep your fingers away from the appliance when closing the lid.

! Do not use aggressive scouring agents or sharp metal scrapers to clean the glass, as they can scratch the surface and cause the glass to shatter.

! Remove spills from the glass lid before opening it.

! Do not close the glass lid when the burners are in operation or still warm.

Main Components

The exact position of the control knobs can be found in the main components section.

• 1. Glass lid
• 2. Pan supports
• 3. Ignition (optional)
• 4. Oven rack
• 5. Grill/Oven
• 6. Control panel
• 7. Gas burner
• 8. Electric hob (Dual Fuel only)
• 9. Grill pan

The types of burners may vary depending on the type of appliance. For more details, refer to the technical specifications.

Before Use

Before using the appliance:

• Ensure all packaging materials have been removed.
• Clean the appliance with warm water and household cleaner and dry it carefully with a soft cloth.
• Ensure the gas supply is connected and turned on.
• Ensure the appliance is connected to the 12V DC battery for the cooling fan and ignition.
• Ensure the pan supports are correctly positioned.

Using the Burners

The exact position of the control knobs can be found in the main components section.

To ignite:

• Press and turn the control knob.
• Turn the control knob counter-clockwise to the High Flame position.
• For models with spark ignition: Press the ignition button.
• For models without ignition: Hold a lit match or a gas igniter to the burner.
• Hold the control knob for approx. 10-15 seconds, then release it.
• Adjust the flame height.
• If the burner goes out unintentionally, turn the control knob to position 0 and wait at least 1 minute before re-igniting the burner.
• If the burner does not ignite within 15 seconds, turn the control knob back to position O and release it. Wait at least 1 minute and then repeat the steps described above to turn on the appliance.

To switch off:

• Turn the control knob clockwise to position 0 to turn off the burner.
• Ensure the control knob is in position O when you no longer use the gas burners.
• Do not close the glass lid when the burners are in operation or still warm.

Using the Electric Hob (if applicable)

The exact position of the control knob can be found in the main components section.

To switch on:

• Turn the control knob either clockwise or counter-clockwise to the desired position (1 - 6).
• For maximum efficiency, use a pot of the correct size with a flat, heavy base. The pot size should correspond to or slightly exceed the size of the hob (up to 2.5 cm larger).

To switch off:

• Turn the control knob to position 0 to switch off the hob.

! Ensure the control knob is in the off position when you no longer use the hob.

! Do not close the glass lid when the hob is in operation or still warm.

Using the Grill

The exact position of the control knob can be found in the main components section.

To switch on:

• Open the door and push in the control knob.
• Hold the control knob and turn it clockwise to the High Flame position.
• For models with spark ignition: Press the ignition button.
• For models without ignition: Hold a lit match or a gas igniter to the burner.
• Hold the control knob for approx. 10-15 seconds, then release it.

! The grill may only be used at the rated temperature.

The correct grill height can be achieved by inverting the pan support to either the high or low position, depending on the type of food being prepared.

The grill pan is multifunctional for use in the grill or oven. The handle design allows for removal or attachment while the pot is in use. Always remove the handle when the pan is in use.

Slide the rack into the desired position.

! The grill door must remain open when igniting and using the grill.

! If the burner goes out unintentionally, turn the control knob to position 0 and wait at least 1 minute before re-igniting the burner.

The grill heats up quickly. However, a preheating time of a few minutes is recommended. A 12-volt cooling fan operates automatically above the grill compartment.

It is normal for the flames of this burner to have yellow tips when heating the grill.

To switch off:

• Turn the control knob counter-clockwise to position 0 to turn off the burner.
• Ensure the control knob is in position O when you no longer use the grill.

Using the Oven

The exact position of the control knob can be found in the main components section.

To switch on:

• Open the door and push in the control knob.
• Hold the knob and turn it counter-clockwise to the High Flame position (240°C, Gas setting 7/9).
• For models with spark ignition: Press the ignition button.
• For models without ignition: Hold a lit match or a gas igniter to the burner.
• Hold the control knob for approx. 10-15 seconds, then release it.
• Set the desired temperature.

Slide the oven rack into the desired position and close the door.

! Ignition must always take place with the oven door open.

! If the burner goes out unintentionally, turn the control knob to position 0 and wait at least 1 minute before re-igniting the burner.

! If the burner does not ignite within 15 seconds, turn the control knob back to position O and release it. Wait at least 1 minute and then repeat the steps described above to turn on the appliance.

The oven heats up quickly. However, a 10-minute preheating is recommended. The oven reaches its maximum temperature in about 15-20 minutes.

To switch off:

• Turn the control knob clockwise to position 0 to turn off the burner.
• Always ensure that the control knob is in position O and the oven door is closed when you no longer use the oven.

Safe Cooking

Ensure that cooking vessels do not extend beyond the edges of the appliance - use pans of the correct size and place them centrally over the burners.

SOH700

SOH710

SOH750

SOH760

SOH770

Ensure there is a minimum distance of 10 mm between the pots and the edges of the hob.

Turn the pots so that the handles do not extend over the front of the appliance.

Ensure that the flame of the gas burner heats the bottom of the pot and not the sides.

The pots and racks included with this appliance are of the maximum size. Do not use larger pots and racks. These can impair heat circulation, leading to longer cooking times.

The oven rack allows good circulation in the rear area of the oven. An elevation at the rear of the rack prevents dishes or bowls from coming into contact with the rear part of the oven.

To remove a rack, pull it forward to the stop and lift it at the front.

To insert a rack into the oven, lower it at the front and slide it back to the stop.

Do not leave the appliance unattended when in use.

Do not use the appliance while driving.

Turn the control knob back to position 0 after cooking.

Keep the appliance clean and avoid the accumulation of fat and food residue.

! Never cover openings or holes in the appliance and do not cover the racks with materials such as aluminum foil. This impairs airflow and can lead to carbon monoxide poisoning.

! The racks and trays in the appliance are hot during and after use. Allow all parts to cool down before touching them, as this can otherwise lead to serious injuries. Always use oven gloves when removing racks and trays from the oven.

Temperature Control

The temperature in the oven is regulated by a thermostatic gas tap and is adjustable in the range of 130 °C to 220 °C.

The table below provides guidance on the approximate temperatures at each rack position relative to the gas setting. The temperature differences between the individual rack positions offer the advantage that different dishes requiring different temperatures can be prepared simultaneously. This way, the gas used for heating the oven is utilized to its maximum.

Table 1: Temperature Ranges

! Be careful not to overload the oven. Ensure sufficient space for heat to circulate unimpeded.

! When using aluminum foil, ensure that it does not obstruct heat circulation or the oven's exhaust.

Maintenance and Cleaning

Thetford recommends having an annual inspection carried out by an authorized service center. Between annual services, you should clean the appliance after each use. Before cleaning, the appliance must cool down and be disconnected from the gas and/or power supply.

! After each use, remove splashes or contaminants with soap and hot water. Dry the surface with a soft cloth.

Use a non-abrasive multi-purpose cleaning milk and a nylon scouring pad to remove stubborn dirt or grease residues.

Use a suitable stainless steel cleaner or polish to remove superficial scratches on the surface.

! Do not use abrasive cleaners, metal scouring pads, or stiff brushes, as they can damage the appliance.

When cleaning the burner rings, ensure that the holes are not blocked.

! Do not use aggressive scouring agents or sharp metal scrapers to clean the glass, as they can scratch the surface and cause the glass to shatter.

! Do not leave wet cloths, cleaning pads, food residues, or other dirt residues to dry on the surface, as this can lead to pitting, staining, or even rust formation.

Always clean in the direction of the brushed surface and not across the grain.

Cleaning agents containing bleach must not come into contact with stainless steel.

The mineral content in water (e.g., iron or lime) can affect the appearance of metal.

! Remove spills from the glass lid before opening it.

The control knobs can be removed for cleaning. The knobs are easy to reattach.

Gas Leaks

As soon as you smell gas, you should do the following:

• Ensure all burners are turned off.
• Extinguish all open flames and do not smoke.
• Immediately interrupt the gas supply at the gas cylinder.
• Do not use electrical switches.
• Open all doors and windows.

Liquefied petroleum gas is heavier than air. Escaping gas collects in the lower part of the room. If you follow the strong, unpleasant smell of gas, you can determine where the leak is located. To investigate where the leak is exactly, use a special leak detection spray. Never use an open flame to find the leak!

Troubleshooting

If you cannot resolve a problem, please contact an authorized local service center or Thetford customer service in your country.

Maintenance

All maintenance work must be carried out by an authorized professional. Before starting maintenance work, the appliance must cool down and be disconnected from the gas and power supply. After all maintenance work, the appliance must be checked for gas tightness and electrical safety.

For maintenance work, please contact your authorized local service center, stating the model and serial number on the rating plate and the date of purchase.

Model Name & Series Number

To reduce the energy consumption of the hob when cooking:

• Use pots of the correct size - they consume less energy than pots that are too large or too small.
• Use only as much energy as is necessary to keep food simmering or cooking - anything more is a waste.
• Cover pots or kettles when possible - this retains heat in the cookware.
• Do not use old, damaged, or warped pots, as they reduce efficiency.

Storage

• Close the gas valve on the gas cylinder.
• Only Dual Fuel: Disconnect the appliance from the power supply.
• For models with spark ignition only: Disconnect the appliance from the battery.
• Ensure all control knobs are in position 0.
• Open the glass lid.
• Close the grill door.
• Close the oven door.
• Wipe the appliance clean and dry.

Technical Specifications

Table 2: Technical Specifications of the Burners

! This appliance is designed for use with LPG and should not be operated with any other gas.

! This appliance must be grounded.

Disposal

Your product was designed and manufactured using high-quality materials and components. These can be recycled and reused. Dispose of the product at the end of its service life in accordance with locally applicable regulations. Never dispose of the product in normal household waste. Proper disposal of your old product contributes to avoiding potential negative impacts on the environment and human health.

Questions

If you have questions about your product, parts, accessories, or authorized service centers, please visit www.thetford.com.

If you cannot resolve a problem, please contact an authorized local service center or Thetford customer service in your country.

Warranty

Thetford BV offers end-users of its products a three-year warranty. If a defect occurs during the warranty period, Thetford will replace or repair the product. In this case, the costs for replacement, labor costs for the replacement of defective components, and/or the cost of the parts themselves will be borne by Thetford.

Purchased spare parts have a one-year warranty. The warranty does not cover assembly and/or labor costs.

1. To make a claim under this warranty, the user must bring the product to an authorized Thetford service partner, where the claim will be assessed.

2. Components replaced under warranty become the property of Thetford.

3. Applicable consumer protection laws remain unaffected by this warranty.

4. This warranty does not apply to products used for commercial purposes.

5. Warranty claims will not be recognized in the following cases:

• The product was used improperly, or the instructions described in the manual were not followed.
• The product was not installed in accordance with the instructions.
• Modifications have been made to the product.
• The product was repaired by a non-authorized Thetford service partner.
• The serial number or product code has been tampered with or removed.
• The product was damaged due to misuse.