Aldes Virtuo-Fix 45° Galvanized Elbow with Joint - Ø 250 mm
Product Overview
The Aldes Virtuo-Fix 45° elbow with joint is designed to change the direction of a galvanized ductwork system by 45 degrees while ensuring Class C airtightness. For diameters up to 200 mm, the elbows are stamped, while for diameters from 250 mm to 560 mm, they are sectorized.
Key Product Advantages:
- Easy and quick installation.
- Class C airtightness.
- Aesthetic ductwork appearance.
Description
The 45° elbow with joint allows for a 45° change in direction in a galvanized ductwork system, ensuring Class C airtightness. Elbows are stamped for diameters up to 200 mm and sectorized for diameters from 250 mm to 560 mm.
Application Domains
Suitable for residential collective housing, new construction, renovation, and tertiary sector premises.
Installation
- The push-fit/pull-off connection is made by a slight rotation of the accessory into the duct.
- Airtightness is ensured by the ALDES joint, eliminating the need for mastic or adhesive tape.
- Self-tapping screws are recommended, especially for vertical installations.
- Installation time savings compared to standard accessories are approximately 20% (estimated at a minimum of 15-30 seconds per joint for diameters 125-315 mm, resulting in 30-60 seconds saved per accessory for these diameters).
- ALDES jointed accessories are specifically designed for easy push-fit/pull-off connections. While ensuring Class C airtightness, the ALDES range is characterized by low connection torque.
Reference Argument
Application:
- 45° airtight change of direction for tertiary or collective HVAC ductwork.
Description:
- Stamped elbow with joint, galvanized steel, 250 mm diameter.
Main Characteristics
- Available in diameters from 125 mm to 560 mm.
- Galvanized steel compliant with EN 10346 standard, ensuring coating regularity.
- Operating temperatures: -30°C to +100°C.
- Resistance to aging (over 30 years), UV, and ozone.
- Fire classification: MO.
- Airtightness class C according to NF EN 12237 standard.
Dimensional Data
| References | Ø (mm) | Ø A (mm) |
|---|---|---|
| 11098125 | 250 | 500 |
Dimensional Diagram for 45° Elbow with Joint
[Diagram showing a 45-degree elbow with dimensions labeled Ø and Ø A]
Regulatory Data
| References | Fire Classification |
|---|---|
| 11098125 | MO |
General Information
- References: 11098125
- Main Material: Galvanized steel
For more information, contact your Aldes advisor. Visit www.aldes.com.
RCS Lyon 956 506 828 - Aldes reserves the right to make any modifications to its products related to technical evolution. - Non-contractual information.
