Features & Benefits
- The Liberty® cooktop features two large flexible cooking zones and FlexPlus™ heating elements for superior cooking performance.
- HeatShift® feature: Offers three preset heat zones, allowing power level adjustment by simply moving the pot across the cooking zone.
- MoveMode® feature: Enables easy transfer of settings without needing to reset power levels when moving a pot.
- CookSmart®: Provides 5 pre-set temperature levels for effortless pan-frying of various foods.
- Connected Experience powered by Home Connect®: Allows remote monitoring of the cooktop's status via a mobile app and provides remote diagnostics.
Element Performance
Diagram showing four numbered heating elements (1, 2, 3, 4) and two larger FlexPlus™ zones labeled 1A and 3A, indicating their positions on the cooktop.
Controls | Number of Inductor Elements | Power |
---|---|---|
Element 1 (Back Left) | 4 | 2,200 W / 3,600 W (In Boost) |
Element 2 (Front Left) | 2,200 W / 3,600 W (In Boost) | |
Element 3 (Back Right) | 2,200 W / 3,600 W (In Boost) | |
Element 4 (Front Right) | 2,200 W / 3,600 W (In Boost) | |
Left Area + 1A FlexPlus™ Left Heating Element | 3,300 W / 3,600 W (In Boost) | |
Right Area + 3A FlexPlus™ Right Heating Element | 3,300 W / 3,600 W (In Boost) |
Element Size
Element | Dimensions |
---|---|
Dimension of Back Left Heating Element | 8 1/2" x 7 1/2" |
Dimension of Front Left Heating Element | 8 1/2" x 7 1/2" |
Dimension of Back Right Heating Element | 8 1/2" x 7 1/2" |
Dimension of Front Right Heating Element | 8 1/2" x 7 1/2" |
Dimension of FlexPlus™ Left Heating Element | 3 9/16" x 11 1/4" |
Dimension of FlexPlus™ Right Heating Element | 3 9/16" x 11 1/4" |
Technical Details
Specification | Value |
---|---|
Watts (W) | 6,240 / 7,200 W |
Circuit Breaker (A) | 30 A |
Volts (V) | 208 / 240 V |
Frequency (Hz) | 60 Hz |
Plug Type | No Plug |
Conduit | 37" Flexible 3-Wire |
Energy Source | Electric |
Dimensions & Weight
Diagram showing the 30-inch cooktop's cutout dimensions. Key measurements include: overall width 30" (762mm), overall depth 21 1/4" (540mm), required cutout width 28 3/4"-28 7/8" (731-734mm), and cutout depth 19 7/8"-20" (505-508mm). Setback distances: 2 1/4" (57mm) from front, 2" (51mm) from rear. Installed depth (with air gap) is 4 1/8" (105mm).
Specification | Value |
---|---|
Overall Appliance Dimensions (HxWxD) (in) | 3 7/8" x 31" x 21 1/4" |
Required Cutout Size (HxWxD) (in) | 3 7/8" x 28 3/4" x 19 7/8" |
Minimum Distance From Counter Front (in) | 2 1/4" |
Minimum Distance From Rear Wall (in) | 2" |
Net Weight (lbs) | 39 lbs |
Installation Requirements
Cutout Dimensions & Notes
Note: The work surface should be horizontal and level. The stability of the countertop should be confirmed even after making the cutout.
Ventilation Clearance Requirements
Diagram showing ventilation clearance requirements. A minimum of 3 3/4 inches (95 mm) is required above the cooktop. The installed depth requires a minimum of 13/16 inches (20 mm).
Installation Above a Thermador Wall Oven
Product Type | A (Inches/mm) | B min. (Inches/mm) | C max. (Inches/mm) |
---|---|---|---|
Conventional Oven | 28 1/4 (718) | 31 1/4 (794) min. | 4 3/4 (121) |
Steam Oven | 25 1/16 (636) | 28 1/16 (713) | 7 15/16 (202) |
Steam Oven with 4" Storage Drawer* | 28 1/4 (718) | 31 1/4 (794) min. | 4 3/4 (121) |
Microwave / Speed Oven | 19 1/4 (488) | 24 (609) min. | 12" (306) |
Microwave / Speed Oven with Warming drawer* | 28 1/4 (718) | 31 1/4 (794) min. | 4 3/4 (121) |
When installing an oven or oven with a drawer in combination with a cooktop, a minimum distance between the cabinet floor and countertop (B) is required. Reference the table for dimensions. Refer to the oven installation guide for all other measurements.
Warranty
Limited Warranty: Entire Appliance, Parts and Labor - 2 Year
Important Notes
- *FlexPlus™ heating element can be activated only in combination with the adjacent left or right heating element.
- †To be fully ADA compliant, these units must be installed according to ADA guidelines. Please check current ADA requirements for guidance on installation.
- These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of delivery. For complete warranty details, refer to your Use & Care manual, or ask your dealer.
- Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.